| [ Total Views: 506 | Total Replies: 4 | Thread Id: 101383 ] |
|
|
 bugmaniaar
Officially Full-On Dubber
Posts: 295
Threads: 18
Registered: June 6th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 28th, 2013 at 08:40 AM |
|
|
Beetle Wiper Arms
Hi all
I have a 63 bug and the wiper arms seem to have too little pressure pushing against the windscreen.
Is there anyway to increase the pressure that they push against the window??
Thanks,CC
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on March 28th, 2013 at 09:41 AM |
|
|
I know it sounds crazy but its tru, literally bend them in a wee bit. 
That bend in the arm is like a spring maintaining wiper contact/pressure.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on March 28th, 2013 at 10:18 AM |
|
|
| Quote: | Originally
posted by bajachris88
I know it sounds crazy but its tru, literally bend them in a wee bit.
That bend in the arm is like a spring maintaining wiper contact/pressure.
|
As Chris says actually bending the arm outwards eases the tension on the spring by moving the pivot point,lube the roller and make sure it is not worn
excessively in the pivot pin or roller. .
|
|
|
bugmaniaar
Officially Full-On Dubber
Posts: 295
Threads: 18
Registered: June 6th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 28th, 2013 at 11:44 AM |
|
|
Thanks guys
I'll give it a go...
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on March 28th, 2013 at 10:29 PM |
|
|
| Quote: | Originally
posted by bugmaniaar
Hi all
I have a 63 bug and the wiper arms seem to have too little pressure pushing against the windscreen.
Is there anyway to increase the pressure that they push against the window??
Thanks,CC
|
the spring or tension piece is probably too weak...
so, just gently pend the arm in to the windscreen ..
that should put more pressure on it..
or replace the wiper arms with those off a 1968 beetle
which has proper spring tension and proper wiper blades
and the shaft is the same size..
so they just fit on and tighten up the grub screw...
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
