| [ Total Views: 782 | Total Replies: 10 | Thread Id: 103179 ] |
|
|
 vduboy
Insano Dub Head
Posts: 702
Threads: 41
Registered: October 6th, 2012
Member Is Offline
Theme: UltimaBB Streamlined2
Mood: Dying to get more buggy building time..
|
| posted on August 22nd, 2013 at 12:06 PM |
|
|
Cb Maxi Pumps on 1916 base motor
Hi Guys just after some advice if anyone has used a CB maxi pump 2 on a 1916 or similar, my motor has about 40-50k on it so wanted to get a decent
oil filter on it, Better late than never! But don't want to go to the hassle of stripping it down to full flow just yet, will do that in the future
though.
Anyone used one of these? Good/bad points?
It will all be OK in the end, if it's not OK it's not the end!
|
|
|
vduboy
Insano Dub Head
Posts: 702
Threads: 41
Registered: October 6th, 2012
Member Is Offline
Theme: UltimaBB Streamlined2
Mood: Dying to get more buggy building time..
|
| posted on August 22nd, 2013 at 12:07 PM |
|
|
Also anyone know what size pump Stan fits to these 1916 base engines (non counterweighted crank)? I dont have a spare 3 hours to ask Stan...
It will all be OK in the end, if it's not OK it's not the end!
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on August 22nd, 2013 at 12:18 PM |
|
|
you have pm
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on August 22nd, 2013 at 12:25 PM |
|
|
Just be aware if the pump is larger (say >26mm gears) you will need ot use a thinner oil as the excess pressure can blow the oil cooler as it
overcomes the oil pressure regulator.
I think i did that to mine, it leaks pretty badly, still develops pressure though.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
vduboy
Insano Dub Head
Posts: 702
Threads: 41
Registered: October 6th, 2012
Member Is Offline
Theme: UltimaBB Streamlined2
Mood: Dying to get more buggy building time..
|
| posted on August 22nd, 2013 at 12:36 PM |
|
|
Cheers thanks for that Bajachris88, just got PM of Craig letting me know that Stan fits up 30mm ones, I've never had an issue with oil pressure just
wanted to add a filter, never cared for the standard vw rock catcher much.. Cheers for the advice mate!
It will all be OK in the end, if it's not OK it's not the end!
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on August 22nd, 2013 at 12:57 PM |
|
|
26mm pump is all that's reguired IMO.
The in/out style pumps are not my recommendation but when fitting a full flow, it is really your only option while the engine is assembled. The reason
the in/out pump is not preffered is the restriction of the reduced diameter of the oil galleries within the pump body. If using this style tho, I
would use the design that uses the oil hoses as I can't see the sense in fitting the oil filter in the path of the escaping hot coolig air.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
vduboy
Insano Dub Head
Posts: 702
Threads: 41
Registered: October 6th, 2012
Member Is Offline
Theme: UltimaBB Streamlined2
Mood: Dying to get more buggy building time..
|
| posted on August 22nd, 2013 at 01:02 PM |
|
|
Sweet, thanks mate, I plan to go to a proper full flow setup when the motor is in need of a split, yeah everyone is in the same boat regarding 26mm
being enough. Thanks for your advice mate. You were selling good quality hoses and fittings weren't you Matt? Do you also sell the filter mounts and
filters?
It will all be OK in the end, if it's not OK it's not the end!
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on August 22nd, 2013 at 01:11 PM |
|
|
Yes mate, I have Phenix hose and fittings available at a good price, also L and R hand remote oil filter mounts available. http://www.phenixindustries.com.au/shop/
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
vduboy
Insano Dub Head
Posts: 702
Threads: 41
Registered: October 6th, 2012
Member Is Offline
Theme: UltimaBB Streamlined2
Mood: Dying to get more buggy building time..
|
| posted on August 22nd, 2013 at 01:14 PM |
|
|
Sweet Ill check it out thanks mate.
It will all be OK in the end, if it's not OK it's not the end!
|
|
|
vduboy
Insano Dub Head
Posts: 702
Threads: 41
Registered: October 6th, 2012
Member Is Offline
Theme: UltimaBB Streamlined2
Mood: Dying to get more buggy building time..
|
| posted on August 22nd, 2013 at 02:11 PM |
|
|
I don't think you have enough fittings on the site Matt! Ill figure out what I need and send you a PM, might be a while off yet, still mocking it all
up. Couldn't see the Oil pump mounts on the site though.. What filters do they take anyway? Cheers for all the help.
It will all be OK in the end, if it's not OK it's not the end!
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on August 22nd, 2013 at 03:37 PM |
|
|
The filters I use are the German (Knect or Mann) that fit type 4 engines as I believe the filtration and quality to be superior to cheaper versions
but a Z9 also fits which is commonly available ay any spare parts shop.
Yes, the Phenix site has plenty of fittings, I am a distributer but the filter mounts are not listed there, I do have them in stock so certainly can
be included in your order if you let me know.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
