Board Logo
Go To Bottom

Printable Version  
[ Total Views: 428 | Total Replies: 8 | Thread Id: 103526 ]
Author: Subject:  Window stuck
Member1blue51993
Casual Dubber
*


No Avatar


Posts: 29
Threads: 6
Registered: December 31st, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on September 22nd, 2013 at 11:39 AM
Window stuck


My right side window is stuck in the door frame. The Glass is no longer attached to the lifter?/ guide the raises and lowers the window. Any ideas on how to loosen the window without breaking it? Cheers. Also the rubber guide near the edge of the door-should that be infront or behind the metal as the screw is missing, thanks!

Error
Sorry, you must be a registered user in order to download attachments.
Super ModeratorBizarre
Super Moderator
The artist formerly known as blue74l
*******

Rank Avatar

Avatar


Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline

Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )

posted on September 22nd, 2013 at 12:06 PM



Can you still wind the handle up and down and the lifter moves??

The glass only sits in the lifter and is held in place with some rubber at the bottom.

You said this car has sat for a while - i am guessing the glass has frozen in the bailey channels and is stuck there.
As said - it doent take much to pull the glass out of the lifter thing

maybe a bit of WD40 round the outside of the glass, even run a blade down the side of the glass.
then apply pressure either side of the window and push down

Good luck




Futue te ipsum!!!
Member1blue51993
Casual Dubber
*


No Avatar


Posts: 29
Threads: 6
Registered: December 31st, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on September 22nd, 2013 at 12:13 PM



The lifter still works, will try the WD40. Bloody annoying tho!-thanks
Membersilver
Veteran Volks Folk
Dangerous when poked
*****


Avatar


Posts: 2169
Threads: 162
Registered: December 8th, 2002
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: In 2 Minds

posted on September 22nd, 2013 at 12:24 PM



I can see a bolt missing in the side channel guide, I could see that making the window tight



Keeping it real !
Member1blue51993
Casual Dubber
*


No Avatar


Posts: 29
Threads: 6
Registered: December 31st, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on September 22nd, 2013 at 12:40 PM



could one bolt missing jam the entire window>? looking up at the window winder mech it looks like its slightly bent around the 3/4 vent post, is that normal?. Might have to look at the other door and see if there is something different..
Membersilver
Veteran Volks Folk
Dangerous when poked
*****


Avatar


Posts: 2169
Threads: 162
Registered: December 8th, 2002
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: In 2 Minds

posted on September 22nd, 2013 at 12:43 PM



Quote:
Originally posted by 1blue51993
could one bolt missing jam the entire window>?.


yes that channel looks too be leaning in about 15mm i am certain that would make it tighter




Keeping it real !
Member1blue51993
Casual Dubber
*


No Avatar


Posts: 29
Threads: 6
Registered: December 31st, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on September 22nd, 2013 at 01:44 PM



just took card off left hand door and the chanel/guide is in the same position and window works. However when i look up at the winder mech I cant see it, where as drivers door I can, thinking its been bent and thats why the glass cant get past it?
Might need a new regulator thingy??
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on September 22nd, 2013 at 02:33 PM



Hi
I have sent you a PM..
looks like the glass has come out of the bottom channel..
maybe the channel has rusted out...

LEE




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Member1blue51993
Casual Dubber
*


No Avatar


Posts: 29
Threads: 6
Registered: December 31st, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on September 22nd, 2013 at 03:48 PM



Thanks Lee, PM sent to you-cheers


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 2.9% - SQL: 97.1% ]