| [ Total Views: 589 | Total Replies: 5 | Thread Id: 103772 ] |
|
|
 davidr
Casual Dubber
Posts: 26
Threads: 13
Registered: October 11th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 13th, 2013 at 04:18 PM |
|
|
Compression Test Results..
G'day all,
I did a compression test on my motor (71 superbug) yesterday and came up with the following.
#1 105
#2 115
#3 118
#4 130
Did the test on warm motor. Hope someone may like to give an analysis of the results.
Anything I need to be concerned about.?
Cheers,
Dave.
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 13th, 2013 at 07:25 PM |
|
|
There are tests and there are tests
Was it a screw in tester or push in?
Whatever - 115 to say 125 is the mark for a healthy 1600
#4 seems really healthy and #1 ....well, is a bit low, but nothing to worry too much about.
"ideally" they should be within 5lbs of each other......... but .................
Have a read here
http://www.vw-resource.com/vw-resource.com_non_ssl/search.php?zoom_query=comp...
If it is driving fine i wouldnt worry, just keep an eye on things
Futue te ipsum!!!
|
|
|
davidr
Casual Dubber
Posts: 26
Threads: 13
Registered: October 11th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 13th, 2013 at 07:54 PM |
|
|
Thanks mate,
Screw in tester.
There was probably 10-15 mins by the time I got from #1 to #4. Could that be a factor.?
Cheers.
|
|
|
vduboy
Insano Dub Head
Posts: 702
Threads: 41
Registered: October 6th, 2012
Member Is Offline
Theme: UltimaBB Streamlined2
Mood: Dying to get more buggy building time..
|
| posted on October 14th, 2013 at 11:01 AM |
|
|
Did you do the test with a wide open throttle as well? As doing it with the throttle closed can affect the reading.
It will all be OK in the end, if it's not OK it's not the end!
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on October 19th, 2013 at 11:29 AM |
|
|
you need to check you tappet gaps and then retest cos no1 is quite low compared to the others. generally you want them to be within 10% of each other.
More than this and altho engine will run it won't be as smooth as it should be.
If no1 doesn't come up after tappets then means either worn valves or piston rings. Fine for now but one of them is getting near rejuvenation time.
madness is in the eye of the beholder  |
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on October 19th, 2013 at 11:44 AM |
|
|
Also do the test with ALL spark plugs removed to allow the motor to spin quickly.
|
|
|
