| [ Total Views: 1427 | Total Replies: 12 | Thread Id: 104950 ] |
|
|
 humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on February 3rd, 2014 at 04:58 PM |
|
|
Boxter brakes on a SBug
Ok fellas... Here's the deal.
I have recently fitted Boxter Monoblocks on a SBug for a mate. The calipers felt and looked to be in very good order. The caliper bracket and strut
kit came from VDub Engineering and are of a very high standard. The pad and rotors are brand new, as are the soft brake lines. The MC was rebuilt last
year. And there is about 15mm of play at the pedal. The rear drums are new Porsche pattern stockers. The whole lot bled up fine. The pedal feels good
and the car tracks and stops amazingly well, but....
The front brakes are dragging.
We have driven the car a total of 100kms since last Thursday and things don't seem to have improved. Everything is as before. Brakes done feel hot or
anything after a drive, but the drag on the brakes is still there.
Any ideas?
|
|
|
Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on February 3rd, 2014 at 05:11 PM |
|
|
I know its simple, but did you check the slides of the calipers. Did they slide easy?
That's my first thought.
Was there any drag after you bleed the brakes, before driving. The calipers are definitely square too the rotor, not kicked a bit causing drag.
Kev
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on February 3rd, 2014 at 07:28 PM |
|
|
Hi
Got to ask silly qestions.
Is the roation of caliper going the correct way?
Is it both calpers doing it?
Can you rig up a pressure gauge in the line to check residual pressure?
Could the seals be jamming in the bores?
Steve
|
|
|
karmann141
Wolfsburg Wizard
Posts: 485
Threads: 48
Registered: August 27th, 2009
Member Is Offline
Location: Carindale - Brisbane
Theme: UltimaBB Pro Blue
|
| posted on February 3rd, 2014 at 10:30 PM |
|
|
As above and
the caliper pistons may be sticking. Get a cailper rebuild kit - its always worth replacing seals and cleaning up/inspecting the pistons. Its always
difficult to know how long the calipers have been lying around.
1961 K Ghia - Porsche 5 sp, EJ20T, Brembo's, Dble A arm susp
1974 L Bug - Porsche 944 brakes, Boxster 16's
1974 Bay Camper - EJ20, twin radiators, Boxster 16x7's
Half Beetle trailer with Boxster 16x7's
2011 Tiguan TDI 4Motion
2010 LR Discovery 4 TDV
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on February 3rd, 2014 at 11:48 PM |
|
|
Supposedly the calipers were fresh and off a recent wreck... The pistons moved back in sweetly when I fitted the new pads... Clean fluid came out upon
compression. Didn't check for drag before bleeding, though the rotors spun free before I fitted the calipers. As I suggested earlier Steve... Both
calipers are dragging equally, and yes they are on there correctly... Bleed nipples to the top.... They look to be running straight and square.
The thought that the calipers are sticking did come to mind... Thinking that the pistons might have gotten stuck on dirt ridge in the bore.
|
|
|
ragged
A.k.a.: David
Wolfsburg Wizard
Just ask if you need HELP!
Posts: 478
Threads: 46
Registered: January 25th, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue
Mood: Medication seems to be working
|
| posted on February 4th, 2014 at 12:02 AM |
|
|
Try cracking open the bleed nipples to see if there is 1) any residual pressure and 2) the disc then spins freely.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on February 4th, 2014 at 08:22 AM |
|
|
| Quote: | Originally
posted by ragged
Try cracking open the bleed nipples to see if there is 1) any residual pressure and 2) the disc then spins freely.
|
X2 it may not be a caliper problem,possibly master cylinder.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on February 4th, 2014 at 09:10 AM |
|
|
Hi
Even if the bleed screws are at the top you can still have rotor spinning the wrong way in the calliper, there should should be a direction arrow cast
onto the calliper. If it is the wrong was round you can swap the cross pipe and bleed nipple end to end.
The small piston should be the 1st one the rotor sees and the large one is the last.
Steve
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on February 5th, 2014 at 11:44 PM |
|
|
The are Boxter monoblock calipers Steve... They are 4 piston deals with all equal sized pistons as far as I know.... They were marked left and right
when I pulled them from the box.... But I will check that idea, and have a go at the cracking of the bleed nipples this weekend.
Rebuild kits are being hunted down as we speak.
Cheers for your replies folks.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on February 6th, 2014 at 08:05 AM |
|
|
Hi
It should have 36 & 40 mm pistons.
Steve
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on February 6th, 2014 at 08:27 AM |
|
|
ps, I realised they were Boxster brakes, I just used the Willwood picture to get across what I meant by the piston position, they use odd size pistons
to prevent the long pad from cocking
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on February 8th, 2014 at 09:40 AM |
|
|
| Quote: | Originally
posted by grumble
| Quote: | Originally
posted by ragged
Try cracking open the bleed nipples to see if there is 1) any residual pressure and 2) the disc then spins freely.
|
X2 it may not be a caliper problem,possibly master cylinder.
|
make sure it has the correct pedal free play.
lack of free play on the MC was cause build up of pressure.
Hope that helps.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
karmann141
Wolfsburg Wizard
Posts: 485
Threads: 48
Registered: August 27th, 2009
Member Is Offline
Location: Carindale - Brisbane
Theme: UltimaBB Pro Blue
|
| posted on February 8th, 2014 at 01:36 PM |
|
|
Try Bigg Red in the UK for rebuild kits - found them to be much cheaper than in Aus. and postage is cheap.
http://biggred.co.uk/onlinestore.php
1961 K Ghia - Porsche 5 sp, EJ20T, Brembo's, Dble A arm susp
1974 L Bug - Porsche 944 brakes, Boxster 16's
1974 Bay Camper - EJ20, twin radiators, Boxster 16x7's
Half Beetle trailer with Boxster 16x7's
2011 Tiguan TDI 4Motion
2010 LR Discovery 4 TDV
|
|
|
