| [ Total Views: 4869 | Total Replies: 7 | Thread Id: 106214 ] |
|
|
 showe
Learner Dubber
Posts: 12
Threads: 3
Registered: November 11th, 2010
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 1st, 2014 at 07:07 AM |
|
|
t3 coolant
What is the best coolant to use in my T3. I went to the local vw agent and he said you can't buy G11 any more.
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on June 1st, 2014 at 07:41 AM |
|
|
where are you located you probably carn't buy from VW dealer but after market shop will have it
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on June 1st, 2014 at 12:10 PM |
|
|
G12 or G12+ are fine I'm led to believe so is what I use.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
bugzla
Custom Title Time!
Posts: 1164
Threads: 240
Registered: June 9th, 2007
Member Is Offline
Location: townsville
Theme: UltimaBB Pro Blue ( Default )
Mood: always happy
|
| posted on June 1st, 2014 at 12:14 PM |
|
|
nulon make the blue euro coolant
|
|
|
showe
Learner Dubber
Posts: 12
Threads: 3
Registered: November 11th, 2010
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 1st, 2014 at 04:45 PM |
|
|
Thanks for the replays
im in camden south west sydney
G12 and nylon blue both look like they will do the job
|
|
|
Beerboy
Custom Title Time!
Posts: 1030
Threads: 147
Registered: July 17th, 2004
Member Is Offline
Location: Balmain Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 12th, 2014 at 02:03 PM |
|
|
Phosphate free is what you want. most people say to go with the vw approved stuff though
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71
|
|
|
kombivan
Learner Dubber
Posts: 5
Threads: 1
Registered: October 14th, 2013
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 16th, 2017 at 08:56 PM |
|
|
OK G11 coolant is still available you can get it from Stoakers or justkampers are only 2 of the suppliers, I have been advised to avoid the 12 and
use 12+ incase there is a mix up and are temped to use or accidently use the wrong one. The three coolants are not inter mixable and if you change
from one to another coolant there may be some problems.
Now the big hype about coolant is to preserve head studs and avoid corrosion of the heads. Well the corrision of the heads was caused by a gasket
sealant VW used on the heads it caused electrolysis of the heads and subsubquent leaking. This was changed after 1989 some time.
The Head studs 1989 and before didn't have a protective coating to protect them this came into play in 1990 and any engine rebuilt since then has
been put together with the head studs with the protective black coating coolant is still wise.
I blew a hose in the 2001'2002 and it was Sunday I was on a trip I purchased a coolant that protected the alloy and other metals from corrosion it
was green could have beem repco or supacheap I was desperate and i used it for about 10 years without changing it its now 2017 and my engine is still
running strong without problems. |
|
|
Andy
Son of Jim - Creator of Good
Andy's Adventures
Posts: 2816
Threads: 181
Registered: November 5th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy Man
|
| posted on October 16th, 2017 at 11:13 PM |
|
|
https://www.youtube.com/watch?v=_de0GRWRtuY
https://www.youtube.com/watch?v=DgwcSOSW4JE
https://mechanics.stackexchange.com/questions/33100/mixing-coolants
Which ever coolant you choose , ensure the entire system is sound and maintained. If you change from one type to another, flush it a few times with
distilled water first. Keep in mind there will be a few litres (~5L) left in the system after you drain it, this will affect your concentration when
refilling.
The system holds ~16L, depending on how you drain it you will get ~11L out. It's good to keep an eye on the header tank, any debris in the system
will collect there, so it a good indication on the systems health.
If you still have all the original plastic and steel pipes it's worth keeping an eye on them as they are getting old by now. The steel pipes will
corrode under the hoses, the plastic will split under the hoses.
|
|
|
