[ Total Views: 584 | Total Replies: 17 | Thread Id: 106355 ] |
|
paulr
Officially Full-On Dubber
Posts: 332
Threads: 103
Registered: August 29th, 2002
Member Is Offline
Location: Melbourne (Brunswick)
Theme: UltimaBB Pro Blue ( Default )
|
posted on June 15th, 2014 at 04:20 PM |
|
|
Front end knock - bay kombi
Bit stumped here.
When I turn left there's a reasonably sharp knock in the front end. The front ends in pretty good nick. I've jacked it up and the wheels aren't
knocking or rubbing. My instincts say ball joint but they seem ok - any ideas ? It does not do it turning right or driving straight.
Cheers Paul
Dazed and Confused
and riding a pushi
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
posted on June 15th, 2014 at 10:37 PM |
|
|
Did you do the usual check with the wheels off the ground and rock them with hands at 3 & 9 then 6 & 12? These let you know which joint is
playing up.
Also, on the outside chance check all the wheel bolts are tight.
madness is in the eye of the beholder
|
|
paulr
Officially Full-On Dubber
Posts: 332
Threads: 103
Registered: August 29th, 2002
Member Is Offline
Location: Melbourne (Brunswick)
Theme: UltimaBB Pro Blue ( Default )
|
posted on June 15th, 2014 at 11:08 PM |
|
|
Yeah I checked them all but the more I think about the more I am convinced it's the BJs - back to the shed again tomorrow night.
ThAnks psimitar
Dazed and Confused
and riding a pushi
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
posted on June 16th, 2014 at 08:09 AM |
|
|
you know how to correctly check your ball joints, hands on wheels at 12 and 6 Oclock won't do it
More info req'd to help, is it a once only clunk or rythmical as in with the rotation of the wheel, or steering dampner bush (unlikely)
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
paulr
Officially Full-On Dubber
Posts: 332
Threads: 103
Registered: August 29th, 2002
Member Is Offline
Location: Melbourne (Brunswick)
Theme: UltimaBB Pro Blue ( Default )
|
posted on June 16th, 2014 at 03:20 PM |
|
|
It's rhythmical Matt but it clunks . Nothing straight or turning right. Bloke on DSK suggests bottom left ball joint.
Dazed and Confused
and riding a pushi
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
posted on June 16th, 2014 at 05:19 PM |
|
|
Which side does it sound like its coming from? If rythmical and varies with speed and comes from the rh side its a colapsed wheel brg.....my call at
this stage
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
posted on June 16th, 2014 at 05:21 PM |
|
|
Ball joints will clunk on bumps, so may tie rod ends if really nackered, should be replaced way before that bad
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
paulr
Officially Full-On Dubber
Posts: 332
Threads: 103
Registered: August 29th, 2002
Member Is Offline
Location: Melbourne (Brunswick)
Theme: UltimaBB Pro Blue ( Default )
|
posted on June 16th, 2014 at 05:28 PM |
|
|
Thanks Matt
Back to the shed tonight hopefully.
Wheel bearig are fine, wil double check everything else.
Cheers
Dazed and Confused
and riding a pushi
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
posted on June 16th, 2014 at 07:33 PM |
|
|
not control arm bearing or bush?
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
|
|
paulr
Officially Full-On Dubber
Posts: 332
Threads: 103
Registered: August 29th, 2002
Member Is Offline
Location: Melbourne (Brunswick)
Theme: UltimaBB Pro Blue ( Default )
|
posted on June 16th, 2014 at 07:48 PM |
|
|
how do i check that one vlad - i just rechecked - everything thing else seems ok. No movement anywhere.
Dazed and Confused
and riding a pushi
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
posted on June 16th, 2014 at 07:49 PM |
|
|
Wjth the vehicle jacked up and on stands, check the upper ball joints and tie rod ends by squeezing/compressing with large multi-grips, check the
lower b/j's bu levering arm upwards with a large screwdriver. Any more than 2-3mm movement on the b'j's and the can make a noise. Any movement and
they are worn
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
paulr
Officially Full-On Dubber
Posts: 332
Threads: 103
Registered: August 29th, 2002
Member Is Offline
Location: Melbourne (Brunswick)
Theme: UltimaBB Pro Blue ( Default )
|
posted on June 16th, 2014 at 10:14 PM |
|
|
Thanks again Matt. I' ll check it again tomorrow night.
Paul
Dazed and Confused
and riding a pushi
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
posted on June 16th, 2014 at 10:21 PM |
|
|
kombi uses beam with torsion bars right?
I wonder if it could be a loose or flogged anchor screw allowing the control arm to move?
had this happen to my SB years ago and the whole upper arm came out completely when I turned a corner when the screw dropped out.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
|
|
donn
Wolfsburg Elder
Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline
Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED
|
posted on June 17th, 2014 at 12:00 AM |
|
|
Torsion bar rubbers, sounds a lot like a problem I had with a Peugeot many years ago
I dream of a day when a chicken can cross a road without being asked for it's motive!
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
posted on June 17th, 2014 at 11:48 AM |
|
|
Peugeot - demons out!
|
|
donn
Wolfsburg Elder
Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline
Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED
|
posted on June 17th, 2014 at 05:51 PM |
|
|
Come on h, you know you always wanted one, probably still do but sadly they just don't make them like they once did
I dream of a day when a chicken can cross a road without being asked for it's motive!
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
posted on June 17th, 2014 at 06:54 PM |
|
|
Quote: | Originally
posted by donn
Come on h, you know you always wanted one, probably still do but sadly they just don't make them like they once did
|
yea, now they don't rust
madness is in the eye of the beholder
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
posted on June 17th, 2014 at 08:06 PM |
|
|
Quote: | Originally
posted by h
Peugeot - demons out!
|
spewgot!
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
|
|