| [ Total Views: 563 | Total Replies: 6 | Thread Id: 107756 ] |
|
|
 mossman
Commited Dubber
Posts: 73
Threads: 30
Registered: April 6th, 2013
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 26th, 2014 at 11:17 PM |
|
|
Pitman Arm seating on steering box shaft
Hi Guys,
just go my 1960 Baja on the road. The turning circle is tighter turning right than turning left. So the steering wheels turns 1 turn to the left and
1 & 1/4 to the right.
Is it possible for the pitman arm to be rotated on the steering box shaft and the clamp bolt to still sit in the groove ok?
Or is it more likely the tie rods are extremelly poorly adjusted?
The wheel alignemnt seems othwise ok.
|
|
|
Special Air Service
Custom Title Time!
Chief "Gunna"
Posts: 1769
Threads: 210
Registered: October 4th, 2004
Member Is Offline
Location: Old Bar , Mid North Coast , NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: In desperate need of a decent sleep
|
| posted on November 27th, 2014 at 11:19 AM |
|
|
pitman arm can only go on in one location. there is a clamp on the steering shaft between the coupler & the steering box that can be loosened
& then the shaft can be rotated slightly in relation to the steering box.
the other solution would be to have the wheel alignment redone but this time get them to centre the steering wheel in the middle of the travel from
lock to lock. Then index the steering wheel to straight ahead. If you get my drift.
[size=5] Calling all NSW Mid North Coast Veedubbers
Click Below [/size]
[size=6]Mid North
Coast VW [/size] |
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on November 27th, 2014 at 02:47 PM |
|
|
| Quote: | Originally
posted by Special Air Service
the other solution would be to have the wheel alignment redone but this time get them to centre the steering wheel in the middle of the travel from
lock to lock. Then index the steering wheel to straight ahead. If you get my drift.
|
Do you mean do the alignment like they are supposed to?
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on November 27th, 2014 at 06:45 PM |
|
|
Alignment is badly out. I mean the individual toe angles 'may' be OK but they should know to centre the steering before starting.
Out of interest does your steering wheel sit centred when the box is in it's correct central position? If the wheel doesn't match the box then most
places won't check steering wheel alignment and take it's dead ahead position as gospel.
madness is in the eye of the beholder  |
|
|
mossman
Commited Dubber
Posts: 73
Threads: 30
Registered: April 6th, 2013
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 27th, 2014 at 10:01 PM |
|
|
I'll check the seating position of the pitman arm first. Maybe I can get small rotation of the arm to the steering box shaft. Hopefully I dont need
to remove the steering box.
|
|
|
Special Air Service
Custom Title Time!
Chief "Gunna"
Posts: 1769
Threads: 210
Registered: October 4th, 2004
Member Is Offline
Location: Old Bar , Mid North Coast , NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: In desperate need of a decent sleep
|
| posted on November 29th, 2014 at 11:39 AM |
|
|
| Quote: | Originally
posted by AA003
| Quote: | Originally
posted by Special Air Service
the other solution would be to have the wheel alignment redone but this time get them to centre the steering wheel in the middle of the travel from
lock to lock. Then index the steering wheel to straight ahead. If you get my drift.
|
Do you mean do the alignment like they are supposed to?
|
Yeah, I guess you could say that. I'd say they've aligned to the steering wheel straight ahead position rather than centre of steering travel.
I bet they would argue that they have not done anything wrong though.
[size=5] Calling all NSW Mid North Coast Veedubbers
Click Below [/size]
[size=6]Mid North
Coast VW [/size] |
|
|
mossman
Commited Dubber
Posts: 73
Threads: 30
Registered: April 6th, 2013
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 29th, 2014 at 09:45 PM |
|
|
I removed the pitman arm and confirmed that it only seats on the steering box shaft in one position like SAS suggested. Adjusted long and short tie
rods with the steering box centred and and now have similar turning circle on laft and right. Also adjusted wheel alignment to4mm toe in to allow
some room for this to reduce when I lift the front end and it drives well now. Also indexed the steering wheel on the the spline to centre the
steering wheel. Back to factory again!
|
|
|
