Posts: 1
Threads: 1
Registered: April 17th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on December 6th, 2014 at 03:22 PM
[WTB - NSW] Autocraft engine cases
I am wanting to buy Autocraft engine case for 101.6mm bore size. I will consider other brands. Used or new.
rhrnldi
Casual Dubber
Posts: 43
Threads: 7
Registered: November 17th, 2002
Member Is Offline
Location: Melbourne / Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: New Project Time
posted on December 15th, 2014 at 06:52 AM
i have the following parts....
Most are brand new and not used... have been on the shelf since the early 90's
Scat case 3 piece design New
910 pro series heads New
6 x 5"7" Carillo Rods resized by crankshaft eng. (used)
3 stage Autocraft oil pump and pressure relief (used but tested)
86.5 mm crank type 4 + porsche journal .. waiting for final grind. It is a raw early flanged scat forging... Final grind depends on use.. turbo or
nat aspirated...
