Board Logo
Home Home  Frequently Asked Questions FAQ  View Topic Activity Topic Activity  Forum Stats Stats  Contact Us Contact Us  Banners Banners
Last active: Never Not logged in [ Log In - Register ]
Aussieveedubbers Navigation Symbol Tech Talk Navigation Symbol Split Kombi Speedo indicator lights keep flashing Go To Bottom

Printable Version  
[ Total Views: 708 | Total Replies: 0 | Thread Id: 110438 ]
« View Previous Thread View Next Thread »
Author: Subject:  Split Kombi Speedo indicator lights keep flashing
MemberAlfonso56
Casual Dubber
*

No Avatar


Posts: 34
Threads: 7
Registered: September 12th, 2014
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on January 19th, 2016 at 07:57 PM
Split Kombi Speedo indicator lights keep flashing

Hi Guys, just looking for a little help if possible.
I removed the speedo from 1963 Kombi to see if i could get the mileage tripmeter to work. Anyway, tried to place it back in vehicle with wires the same as I removed them (but not sure!) but now the blinker lights flash when you start the bus. The actual blinkers do not go, unless you use the indicator stalk. At a loss. It has a 2 pin flasher unit with one of the pins piggy backed. There is a large white wire attached to the top of the speedo near the blinker bulb but i think that was where it was originally.
Thanks


 Aussieveedubbers Navigation Symbol Tech Talk Navigation Symbol Split Kombi Speedo indicator lights keep flashing   Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.5% - SQL: 98.5% ]