| [ Total Views: 949 | Total Replies: 8 | Thread Id: 110745 ] |
|
|
 ancientbugger
Custom Title Time!
Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Yellow
|
| posted on March 24th, 2016 at 05:35 PM |
|
|
Rear irs toe in?
Can anyone tell me how to adjust the toe in on the rear? My sons baja has been converted to irs and at the moment it's going through a facelift and I
noticed his rear tyres are very worn on the inside. I've tried googling this but couldn't find anything anywhere. Cheers
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off 
|
| posted on March 24th, 2016 at 07:00 PM |
|
|
The spring plates are slotted for just this reason, sliding the axle towards the torsion bar gives you toe-in and away from the torsion bar gives
toe-out. Just off my head 0'50" toe-in on both wheels or 0'0" on both or 0'50" toe-out on both.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
 |
|
|
ancientbugger
Custom Title Time!
Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Yellow
|
| posted on March 24th, 2016 at 09:07 PM |
|
|
That's what I thought but I've tried them all the way forward and still get toe out! Methinks I'll have to persevere, thanks anyway.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on March 24th, 2016 at 11:20 PM |
|
|
Is it an original IRS chassis? If not then if the A arm bracket is not welded in at the correct angle you are unlikely to correct via the spring plate
slots.
Also, if any lengthening of suspension parts has taken place for increased travel for a Baja then again this will cause issues if not done
correctly.
Oh, and being as it's a Baja then maybe the A arm has gotten twisted from the off roading action.
madness is in the eye of the beholder  |
|
|
Birdman
Wolfsburg Wizard
Posts: 428
Threads: 49
Registered: May 19th, 2010
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 25th, 2016 at 01:35 AM |
|
|
One remedy to excessive toe out I have seen used is an eccentric inner trailing arm bushing.
|
|
|
nbturbo
Veteran Volks Folk
Posts: 2171
Threads: 89
Registered: December 19th, 2002
Member Is Offline
Location: Whyalla Sth.Aust.
Theme: UltimaBB Powder
|
| posted on March 25th, 2016 at 05:57 AM |
|
|
Whats the camber look like? Being an offroader,has it had suspension jacked for clearance?
|
|
|
dangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
Posts: 5901
Threads: 178
Registered: January 6th, 2005
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 591
|
| posted on March 25th, 2016 at 08:23 AM |
|
|
On the inside pivot point, make sure the big thick washers are both on the outside.
Despite what you think would be correct, the factory setup is NOT one on each side.
| Quote: | Originally
posted by westi
That's mad Alan.
|
|
|
|
ancientbugger
Custom Title Time!
Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Yellow
|
| posted on March 27th, 2016 at 10:17 AM |
|
|
I thought about this and being irs the slotted holes really wouldn't make much difference as the axles aren't pivoting at the gearbox so would only
move the wheel back and forwards in the same plane and now thinking back you ,Dave may have hit the nail on the head. I bet I put the washers on
wrong. Cheers chaps!
|
|
|
nbturbo
Veteran Volks Folk
Posts: 2171
Threads: 89
Registered: December 19th, 2002
Member Is Offline
Location: Whyalla Sth.Aust.
Theme: UltimaBB Powder
|
| posted on March 27th, 2016 at 07:54 PM |
|
|
The slotted holes can make serious changes to toe in or toe out.They can also make camber changes,but only very slight.
|
|
|
