Board Logo
Go To Bottom

Printable Version  
[ Total Views: 1808 | Total Replies: 4 | Thread Id: 111040 ]
Author: Subject:  lift pump surge tank install on 71 lowlight EJ22
MemberSunnyjim
Officially Full-On Dubber
***


No Avatar


Posts: 239
Threads: 5
Registered: January 15th, 2010
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on May 23rd, 2016 at 06:52 PM
lift pump surge tank install on 71 lowlight EJ22


Hi all

My ej22 conversion has taken longer than expected but that should have been anticipated , right?:no:

After rolling into the neighbours yard, coz dumb dumb left it in neutral with no HB on! Anyway it forced me to address rust problems and I ended up doing the doglegs and replacing the front inner and outer valances.

Then back onto finalising the conversion I am happy to report my cooling system seems great now that I have plumbed the 2 engine bay honda triple core rads in parrallel .

So over the last couple of years I have had fuel issues . I have bought several pumps. One ebay copy did fail on me but I finally had to admit my system was flawed . When I took my tank out I got my mechanic to weld in a much bigger outlet for me . I thought this would suffice but after endless fuel hose plumbing rearrangements I still had a screaming fuel pump after 20 mins of driving. It would often stall and not restart until the next morning. I finally decided to install a lift pump and surge tank.

It seems to have solved the issue but one small issue the |EFI pump is an original Bosch 044 form Chzech. It so good and quiet but I bought a HEP 0202 lift pump and it is real noisy.

Can anyone reccomend a quiet 12volt low pressure lif pump?

[IMG]http://i693.photobucket.com/albums/vv298/Grubbyboy_bucket/th_20160511_135649_zpshtsxdobg.mp4[/IMG]

thnks
paul
MemberSunnyjim
Officially Full-On Dubber
***


No Avatar


Posts: 239
Threads: 5
Registered: January 15th, 2010
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on May 24th, 2016 at 08:00 AM



hi all

i have searched and found a pierburg type lift pump. i heard it is quiet compared to facet and hep020.

has anyone had any experience?

also there are 2 flavours. 65litre 3 to 4psi and 100litre 5 to 7 psi.
what should i go for?


do i need to consider the flow rate of my efi pump? i think a commodore vl 070 has over 100 litres per hour?

i was favoring the lower 65litre option as i was assuming if might be quieter than a higher pressure higher flow model?


advice welcome

http://m.ebay.com.au/itm/New-PIERBURG-Carby-100L-H-3-5PSI-E85-Low-Pressure-In...
Memberkarmann141
Wolfsburg Wizard
***


No Avatar


Posts: 485
Threads: 48
Registered: August 27th, 2009
Member Is Offline

Location: Carindale - Brisbane
Theme: UltimaBB Pro Blue

posted on May 26th, 2016 at 06:54 PM



Hi Paul,

The Pierburg lift pump is very quiet. I have one you could borrow and try if you haven't bought one already.

Cheers




1961 K Ghia - Porsche 5 sp, EJ20T, Brembo's, Dble A arm susp
1974 L Bug - Porsche 944 brakes, Boxster 16's
1974 Bay Camper - EJ20, twin radiators, Boxster 16x7's
Half Beetle trailer with Boxster 16x7's
2011 Tiguan TDI 4Motion
2010 LR Discovery 4 TDV
MemberSunnyjim
Officially Full-On Dubber
***


No Avatar


Posts: 239
Threads: 5
Registered: January 15th, 2010
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on May 28th, 2016 at 06:56 AM



G'day Nolan

thx for the confirnation and offer

i got one coming next week

how's the kg coming along?
MemberSunnyjim
Officially Full-On Dubber
***


No Avatar


Posts: 239
Threads: 5
Registered: January 15th, 2010
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on June 8th, 2016 at 11:46 AM



http://i693.photobucket.com/albums/vv298/Grubbyboy_bucket/IMG_20160604_123932_zpsuvnclbdm.jpg


here is the new lift pump. it looks just like a normal efi pump except about half the size.

anyway got it installed and it is quiet. i still need to test drive but looks good so far.


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 10.7% - SQL: 89.3% ]