| [ Total Views: 1070 | Total Replies: 8 | Thread Id: 111326 ] |
|
|
 bronte17
Casual Dubber
Posts: 29
Threads: 9
Registered: November 3rd, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 24th, 2016 at 12:27 PM |
|
|
2109 vs 2110
Hi guys looking for some feedback on building a 2109 (76x94) or a 2110 (82x90.5) I like the sound of the 2109 as the stroke is shorter with less case
work.
Any body had experience with both? Engine is for a 71 super street car.
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 24th, 2016 at 01:07 PM |
|
|
If your going to that trouble go 82 x 94
My mate has built several of these with great results
Effort and cost is in the fuel delivery
IDA or injection?
Futue te ipsum!!!
|
|
|
bronte17
Casual Dubber
Posts: 29
Threads: 9
Registered: November 3rd, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 24th, 2016 at 01:59 PM |
|
|
Thanks. It seems the more common combo. Injection would be nice but budget probably won't stretch. CB kits look good as do the weber kits but I
think I will stick with 44idf,s
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on July 24th, 2016 at 02:54 PM |
|
|
shorter stroke is better less case work
BUT as per above you might as well go 82 x 94 you may need 48s to get the best out of it or injection which will cost around 5K
|
|
|
bronte17
Casual Dubber
Posts: 29
Threads: 9
Registered: November 3rd, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 24th, 2016 at 04:10 PM |
|
|
What's the difference between 'A' and 'B' Pistons in 94mm
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 24th, 2016 at 04:35 PM |
|
|
b pistons are shorter.for longer crank stroke..to keep the engine narrower and helps fit in std engine bay etc..other variables apply..if the
engine's cc is close regardless of crank pistons combo they will make similar power.id go 78 or 82 x94's.if its a street engine id use 44idfs.but
all depends on heads and cam etc etc.have a search around but dont get too confused and suked in by all the wank factors etc.it should be be a
relative easy decision on what size to go.dont get siked in by bug hp numbers either ...
Fabo
|
|
|
hus22l
Officially Full-On Dubber
Posts: 229
Threads: 36
Registered: April 24th, 2012
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 25th, 2016 at 07:18 AM |
|
|
Either way you will most likely need B Pistons. Using A Pistons you might need to clearance the piston skirt. To a large extent it will also depend
on your rods as to how much clearance get you need to do. Longer stroke might also mean clearance get the cam.
But arguably the 90.5s run cooler?
Have a look at some build sheets / diaries (with photos) here or on the samba and you can get an idea of the work involved.
|
|
|
bronte17
Casual Dubber
Posts: 29
Threads: 9
Registered: November 3rd, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 27th, 2016 at 09:21 PM |
|
|
Thanks for the info and views. Some reading on the Samba to come.
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 28th, 2016 at 08:07 AM |
|
|
| Quote: | Originally
posted by bronte17
Thanks for the info and views. Some reading on the Samba to come.
|
Dont get caught up in it all on the samba either.
Good luck
Fabo
|
|
|
