Board Logo
Go To Bottom

Printable Version  
[ Total Views: 1522 | Total Replies: 2 | Thread Id: 111637 ]
Author: Subject:  Fuel tank outlet
Memberancientbugger
Custom Title Time!
*****


Avatar


Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline

Location: sunshine coast
Theme: UltimaBB Pro Yellow

posted on October 5th, 2016 at 06:52 PM
Fuel tank outlet


What way have people added another fuel outlet on tank for return pipe ?
Membernbturbo
Veteran Volks Folk
*****


Avatar


Posts: 2171
Threads: 89
Registered: December 19th, 2002
Member Is Offline

Location: Whyalla Sth.Aust.
Theme: UltimaBB Powder

posted on October 6th, 2016 at 06:14 AM



I have modified 4 tanks for fuel injection return lines- but I have done the pans as well
I have changed the OG supply tube to an 8mm one for the return line, coming out the same holes each end.I run a 10 mm supply pipe and bring it out the pan on the LH side of the frame head close to where the body sits. I always make a small bracket to secure it with a hose clamp. Where the 2 lines end up on the pan for me, I thread the original tank outlet to 1/4 bsp and machine a steel boss with 1/4 bsp hole and weld it about 100 mm to the passenger side of the centre fitting. I have tig welded 2 and silver soldered 2. The biggest drama is always making sure the tank is free of petrol vapour. I always pressure wash with plenty of truck wash, but always shit myself while welding.I just use Ryco air line barb fittings then in the tank.
Memberancientbugger
Custom Title Time!
*****


Avatar


Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline

Location: sunshine coast
Theme: UltimaBB Pro Yellow

posted on October 8th, 2016 at 08:19 AM



thanks nbturbo .


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 7.3% - SQL: 92.7% ]