| [ Total Views: 2689 | Total Replies: 19 | Thread Id: 113062 ] |
|
|
 MeppW
Learner Dubber
Posts: 15
Threads: 6
Registered: July 21st, 2016
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 20th, 2018 at 11:35 AM |
|
|
Retractable Seat Belts
Hey guys, just thought I would tap you knowledge here before I post in the to buy section. Wanting to see if it is possible to put retractable belts
in a 72 type 3 Squareback( thanks Peter, car was in great body condition , rebuilt engine and just about to get it on the road)
Would prefer both front and rear if possible but at a stretch just the front would be great . Spoke to the guys at vintage see dub and they seemed to
think that you need a set of 76 beetle brackets for the front and they weren't sure about the rears .
just wondering if anyone had any experience with this . thanks ,Will
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on January 20th, 2018 at 01:57 PM |
|
|
If you have a good Autobarn store (many others can probably do it too), get them to look up the Klippan brand seat belts - they had them for my 75
beetle, and I think they would be similar for your type 3. The only thing they may not have is the bottom bracket, but I could post a photo if you
need to get it made, it is fairly simple.
From your ole' mate Jeff
|
|
|
pv370
Officially Full-On Dubber
Posts: 272
Threads: 38
Registered: April 7th, 2014
Member Is Offline
Location: Goulburn NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Southern Comfortably Numb
|
| posted on January 20th, 2018 at 02:04 PM |
|
|
Hey Will, looking forward to seeing some pics of the car.................
Cheers Peter
|
|
|
MeppW
Learner Dubber
Posts: 15
Threads: 6
Registered: July 21st, 2016
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 20th, 2018 at 03:55 PM |
|
|
Pete, Got a lot of the resto, Will put some up soon .
Windscreen and tiny bit under battery were the only rust to deal with . She's looking good!
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
MeppW
Learner Dubber
Posts: 15
Threads: 6
Registered: July 21st, 2016
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 20th, 2018 at 03:57 PM |
|
|
Jeff, thanks for the info . I can get the belts , looking to get with webbing that matches seat upholstery . Its the bottom brackets I need . If you
have some pics of yours that would be great , thanks , Will
|
|
|
binner
Fahrvergnugen
Posts: 981
Threads: 210
Registered: January 19th, 2010
Member Is Offline
Location: Brisbane
Theme: UltimaBB Streamlined2
Mood: want more grunt
|
| posted on January 20th, 2018 at 05:10 PM |
|
|
vwheritage has it all, all colors too I think...
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on January 20th, 2018 at 06:52 PM |
|
|
| Quote: | Originally
posted by MeppW
Jeff, thanks for the info . I can get the belts , looking to get with webbing that matches seat upholstery . Its the bottom brackets I need . If you
have some pics of yours that would be great , thanks , Will
|
The bottom brackets for a later beetle look like this. They basically turn the mount 90 degrees so the inertia reel is running the correct direction
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
From your ole' mate Jeff
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on January 20th, 2018 at 06:55 PM |
|
|
| Quote: | Originally
posted by beetleboyjeff
| Quote: | Originally
posted by MeppW
Jeff, thanks for the info . I can get the belts , looking to get with webbing that matches seat upholstery . Its the bottom brackets I need . If you
have some pics of yours that would be great , thanks , Will
|
The bottom brackets for a later beetle look like this. They basically turn the mount 90 degrees so the inertia reel is running the correct direction
|
..... and this is what the reel looks like mounted in a late beetle
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
From your ole' mate Jeff
|
|
|
wombatventures
Wolfsburg Wizard
Posts: 680
Threads: 44
Registered: February 11th, 2013
Member Is Offline
Location: Peterborough SA
Theme: UltimaBB Pro Orange
Mood: BUSted, BUGgered & NOTCHed
|
| posted on January 20th, 2018 at 08:52 PM |
|
|
Now the $64 question Jeff... Where do we find them?
I'd like some for the Notch and the Square as well.
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on January 20th, 2018 at 09:27 PM |
|
|
They wouldn't be that hard to have made out of a piece of angle. If you need, I could take mine off and make a template of them for you.
From your ole' mate Jeff
|
|
|
MeppW
Learner Dubber
Posts: 15
Threads: 6
Registered: July 21st, 2016
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 21st, 2018 at 09:49 AM |
|
|
Jeff , If that would not be too much trouble , that would be great , Thanks , Will
|
|
|
pv370
Officially Full-On Dubber
Posts: 272
Threads: 38
Registered: April 7th, 2014
Member Is Offline
Location: Goulburn NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Southern Comfortably Numb
|
| posted on January 21st, 2018 at 10:58 AM |
|
|
looking great Will..............
give me a call if you need any bits as i still have the graveyard.........
cheers Peter
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on January 21st, 2018 at 06:19 PM |
|
|
| Quote: | Originally
posted by MeppW
Jeff , If that would not be too much trouble , that would be great , Thanks , Will
|
I will try and do it tomorrow evening
From your ole' mate Jeff
|
|
|
wombatventures
Wolfsburg Wizard
Posts: 680
Threads: 44
Registered: February 11th, 2013
Member Is Offline
Location: Peterborough SA
Theme: UltimaBB Pro Orange
Mood: BUSted, BUGgered & NOTCHed
|
| posted on January 21st, 2018 at 08:42 PM |
|
|
Legend as always.
Got tonnes of heavy duty angle here... well maybe just a few bits but still.
Dimensioned plan would work great and can then make a template.
 
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on January 23rd, 2018 at 09:40 PM |
|
|
| Quote: | Originally
posted by beetleboyjeff
| Quote: | Originally
posted by MeppW
Jeff , If that would not be too much trouble , that would be great , Thanks , Will
|
I will try and do it tomorrow evening
|
Sorry about the extra day - I forgot I had a sailing club meeting last night.
Here is a PDF file I have scanned of the drawing I made when I traced the brackets and put measurements on it. The bracket is 3mm thick, and is out of
60 x 45 angle, although I doubt this is critical.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
From your ole' mate Jeff
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on January 23rd, 2018 at 09:59 PM |
|
|
| Quote: | Originally
posted by beetleboyjeff
| Quote: | Originally
posted by beetleboyjeff
| Quote: | Originally
posted by MeppW
Jeff , If that would not be too much trouble , that would be great , Thanks , Will
|
I will try and do it tomorrow evening
|
Sorry about the extra day - I forgot I had a sailing club meeting last night.
Here is a PDF file I have scanned of the drawing I made when I traced the brackets and put measurements on it. The bracket is 3mm thick, and is out of
60 x 45 angle, although I doubt this is critical.
|
I also have 2 photos of the drawing with the bracket sitting on it to help orientate it, as well as the brand and part number that is stamped into
it, if that is any help. There is also a spike that goes into a small hole above the seat belt bolt hole in the bottom of the B pillar, which I assume
is to keep the reel level with the car - I am not sure how necessary this would be. Don't forget that this is the left hand side - the right hand
side is mirror reversed as in the original photos I posted.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
From your ole' mate Jeff
|
|
|
 barls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
Posts: 9467
Threads: 295
Registered: June 22nd, 2004
Member Is Offline
Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices
|
| posted on January 24th, 2018 at 03:12 PM |
|
|
vollks has the whole set up
3 point
https://www.vollks.com.au/store/Seat-belt-3-point-black-lap-chest-retractable...
or 2 point
https://www.vollks.com.au/store/Retractable-2-point-lap-style-seat-belt-unive...
|
|
|
Calcool
Fahrvergnugen
Posts: 965
Threads: 196
Registered: May 19th, 2005
Member Is Offline
Location: South East of Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Going Shopping in my Trolley
|
| posted on July 8th, 2018 at 02:44 PM |
|
|
I put retractable seat belts in my Karmann Ghia years ago I used the front seat belt brackets from a 70s Kombi and mounted them thru the floor. There
are local seat belt suppliers who will make them to colour side and length as well as Australian compliant
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on July 10th, 2018 at 06:45 PM |
|
|
Hi
CIP sell a pair of brackets http://www2.cip1.com/ProductDetails.asp?ProductCode=C26-857-024
The seat belts that Jeffs car uses are not available anymore with the small bolt holes, you can only buy them with a conventional single large bolt
hole.
|
|
|
MeppW
Learner Dubber
Posts: 15
Threads: 6
Registered: July 21st, 2016
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 23rd, 2018 at 02:22 PM |
|
|
Thanks guys for the responses . Got the brackets from CIP and Boris at Vintage Veedub had the belts made . Small thing but a lot more convenient!
|
|
|
