[ Total Views: 1092 | Total Replies: 10 | Thread Id: 113858 ] |
|
MR930
Wolfsburg Wizard
Posts: 665
Threads: 73
Registered: August 27th, 2002
Member Is Offline
Location: Nabiac. NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: VW crazy.
|
posted on October 10th, 2020 at 04:24 PM |
|
|
Webers-need fuel pressure regulator?
I've just put a pair of webers on my buggy and it's running horrible. It has the standard fuel pump so I didn't put in a fuel pressure regulator.
Could this be my issue?
Both my other cars running webers have a regulator but are running electric pumps. It doesn't appear to be running rich. It's a new engine 1641,
runs ok with the revs up but hard to take off. Ideas?
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
posted on October 10th, 2020 at 06:23 PM |
|
|
Barls runs a pressure regulator on his 2 litre with twin webers and i know that it ran like s...t with too much pressure, apparently they use a lower
pressure but I can't remember the figure, I am sure that he wll let you know what he is running.
|
|
barls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
Posts: 9467
Threads: 295
Registered: June 22nd, 2004
Member Is Offline
Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices
|
posted on October 10th, 2020 at 10:08 PM |
|
|
off the top of my head its 1.5 but i could be wrong. ill have look but probably won't get there before monday as I'm working tomorrow.
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
posted on October 11th, 2020 at 05:27 PM |
|
|
2.5 - 3.0 lbs
http://www.redlineweber.com/html/application_guide/important_things_to_know.htm
Futue te ipsum!!!
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
posted on October 11th, 2020 at 05:31 PM |
|
|
I have not seen stock pumps put out greater than 3 lbs
Are they Webers or something else.
What is your jetting?
Mixtures set properly
What is it doing wrong
Futue te ipsum!!!
|
|
MR930
Wolfsburg Wizard
Posts: 665
Threads: 73
Registered: August 27th, 2002
Member Is Offline
Location: Nabiac. NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: VW crazy.
|
posted on October 12th, 2020 at 04:53 AM |
|
|
Yes 40mm idf webers. I'm going to put a pressure regulator on it. It doesn't seem to be overfueled but it's running like crap down low.
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
posted on October 12th, 2020 at 07:37 AM |
|
|
What sieve motor.? Cam?
I have never seen 44
Futue te ipsum!!!
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
posted on October 13th, 2020 at 05:32 AM |
|
|
Poor sync?
Blocked idle jets?
Blocked airs?
|
|
HS618
Officially Full-On Dubber
Posts: 277
Threads: 28
Registered: March 9th, 2005
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
posted on October 13th, 2020 at 04:57 PM |
|
|
Ive been using a stock VW mechanical pump with my 48 IDA Weber street beetle for over 40 years with no regulator. If the (unlikely) pressure is too
great, add a few gaskets under the mechanical pump. Depending on the size of the needle and seat (most common is 2.0mm), a fuel pressure of 2.5 lbs is
adequate.
Sounds more like a tuning problem rather than fuel pressure.
|
|
vassy66T1
A.k.a.: Marcus Vass
Veteran Volks Folk
Wow ... are U reading this?
Posts: 2120
Threads: 76
Registered: June 4th, 2003
Member Is Offline
Location: Brisvegas
Theme: UltimaBB Streamlined2
Mood: Happy to own a VW
|
posted on October 14th, 2020 at 09:05 AM |
|
|
44's on a 1641 are on the larger side. Putting in a smaller venturi (choke) will improve low end response.
Every carb works well if you rev it but it is down low and on transition that is the tuning area
|
|
MR930
Wolfsburg Wizard
Posts: 665
Threads: 73
Registered: August 27th, 2002
Member Is Offline
Location: Nabiac. NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: VW crazy.
|
posted on October 16th, 2020 at 05:16 PM |
|
|
Seems it was just linkages not adjusted right. I trusted my son had done it right.
|
|