| [ Total Views: 1254 | Total Replies: 18 | Thread Id: 13049 ] |
|
|
 jenz58
Scirocco Rare
Postal Menace
Posts: 9121
Threads: 230
Registered: August 26th, 2002
Member Is Offline
Location: croydon, melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruisy
|
 posted on September 8th, 2003 at 09:44 AM |
|
|
How do u get pins out of old..
OK, this is such an easy one but didn't want to stuff up or dmage my door handles
I'm wanting to take the trims off of Bels door to be reupholstered
I have to knock/tap pins out of door handles
Did try gently but worried about slipping and damaging something
What do u use to get them out and is there an angle your meant to go at etc?
My restoration manuals just say remove pins. OK? They didn't want to move, probably some spray first to loosen them |
|
|
VWCOOL
23 Windows of Awesome
Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline
Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help
|
| posted on September 8th, 2003 at 09:46 AM |
|
|
Easy. Just push/knock them out with a nail or bit of thick wire. Shouldn't need any more than a push with your hands (ie: you shouldn;y need a
big hammer)
Pay your debts, CxxT
|
|
|
jenz58
Scirocco Rare
Postal Menace
Posts: 9121
Threads: 230
Registered: August 26th, 2002
Member Is Offline
Location: croydon, melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruisy
|
| posted on September 8th, 2003 at 09:49 AM |
|
|
Will have another go tonight. I got no movement from them???:jesus
p.s. Thanks
[Edited on 7-9-2003 by jenz58] |
|
|
Adam_C
Custom Title Time!
Posts: 1180
Threads: 164
Registered: May 22nd, 2003
Member Is Offline
Location: Bargo, 1hr south of syd
Theme: UltimaBB Pro Blue ( Default )
Mood: could be lower
|
| posted on September 8th, 2003 at 10:15 AM |
|
|
they took a bit of a hit in the beetle but should come out ok..... 1/2 hr before try soem machine oil in the hole ..... 1 drop should loosen it
up....
good luck
adz
Adam
Adzslick@iprimus.com.au
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on September 8th, 2003 at 12:12 PM |
|
|
Jen I always get a friend to help as well to hold the trim back out of the way so u dont damage it when hitting the pin out with a proper size pin
punch n hammer.
Much easier this way to have yr friend push the trim back around the handle so you can get at the pin properly.
|
|
|
jenz58
Scirocco Rare
Postal Menace
Posts: 9121
Threads: 230
Registered: August 26th, 2002
Member Is Offline
Location: croydon, melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruisy
|
| posted on September 8th, 2003 at 07:00 PM |
|
|
Thanks Dave, I was worried about the plastic rim on the handles as I was trying it myself. Not worried about the old trim so much
Hmmm, proper size pin punch??? Is there one? |
|
|
Adam_C
Custom Title Time!
Posts: 1180
Threads: 164
Registered: May 22nd, 2003
Member Is Offline
Location: Bargo, 1hr south of syd
Theme: UltimaBB Pro Blue ( Default )
Mood: could be lower
|
| posted on September 8th, 2003 at 07:13 PM |
|
|
probly but not worth the $$ just use a nail hehe
Adam
Adzslick@iprimus.com.au
|
|
|
jenz58
Scirocco Rare
Postal Menace
Posts: 9121
Threads: 230
Registered: August 26th, 2002
Member Is Offline
Location: croydon, melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruisy
|
| posted on September 8th, 2003 at 07:32 PM |
|
|
LOL
Probably |
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on September 8th, 2003 at 10:01 PM |
|
|
If you use a nail.... thats when you break a nail....
Jen the plastic trims are available new from you know where. Now the trim is a lot more expensive thats why your trying to protect it.
|
|
|
jenz58
Scirocco Rare
Postal Menace
Posts: 9121
Threads: 230
Registered: August 26th, 2002
Member Is Offline
Location: croydon, melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruisy
|
| posted on September 8th, 2003 at 11:18 PM |
|
|
But Dave trims are getting redone:sandrine
The whole reason to get them off, or has something gone over my head again?
No I don't want to damage the handles or the old plastic ring things on them:jesus
Really my main worry was stuffing the pin up
Hmmmm, this is kinda like pulling a tooth:o |
|
|
Grey 57
A.k.a.: Dean
Son of Jim - Creator of Good
Old Grey Cruiser
Posts: 2937
Threads: 355
Registered: August 25th, 2002
Member Is Offline
Location: Phillip Island
Theme: UltimaBB Pro Blue ( Default )
Mood: (OoVoO) (OVO).
|
| posted on September 9th, 2003 at 10:56 PM |
|
|
Nails the best option Jen. File down the point if you are worried about "nailing" something.
Just push the ring away with one hand , hold the nail in the other hand and hit the nail with the hammer. Easy!!!
Try not to loose the pins. Putting them back on is easy!!
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on September 9th, 2003 at 11:21 PM |
|
|
Jen,
I tried to send you this info last night but it couldn't be sent for some unknown reason... something was down... server??
anyway I'll try again.
I have always used a pin punch to knock the pins out.
I tried to draw a pin punch for you but it didn't work after it was posted..
its approx 120mm long and one end (50mm) is 1/8th of an inch round and the other end is about 12mm round.
both ends are flat. the small end has to be smaller than the pin You are knocking out... they are available at most good tool shops etc.
its much easier if you have 3 hands Jen.
One to hold the Pin punch , one to hold the hammer and one to push the plastic ring in so you can hit the pin...
Best of Luck Jen...
I finally have a drawing so You can see roughly what it looks like....
Lee
__________
__________l=========
[Edited on 9-9-2003 by 68AutoBug]
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
jenz58
Scirocco Rare
Postal Menace
Posts: 9121
Threads: 230
Registered: August 26th, 2002
Member Is Offline
Location: croydon, melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruisy
|
| posted on September 10th, 2003 at 09:57 AM |
|
|
The pins in the passenger door came out easily using a nail and just pushing gentle.
Seems like the drivers door trim hasn't been off in the whole of Bel's life maybe, the pins are really fixed in
It is awkward trying to hold the plastic ring and trim back and getting at the pins must admit, especially on the pins that don't want to budge |
|
|
jenz58
Scirocco Rare
Postal Menace
Posts: 9121
Threads: 230
Registered: August 26th, 2002
Member Is Offline
Location: croydon, melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruisy
|
| posted on September 14th, 2003 at 06:22 PM |
|
|
All of the panels are out except for the drivers door. Still can't budge the pins. Have soaked them, no movement
Is drilling them out an option? |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on September 15th, 2003 at 09:00 AM |
|
|
from memory Jen, the pins are made from aluminium, so they are soft and easy to drill... check the pin you have out Jen... is it slightly tapered? if
it is , they will push out easier one way.. have You tried pushing it out from both directions?
Normally they don't have to be tight as the plastic ring keeps them from falling out. It would akward to drill them out.
best of luck.. Lee
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on September 15th, 2003 at 09:08 AM |
|
|
You probably need something stronger than a nail (mild steel) to move the frozen pin.
Do You have a small screwdriver or something hard You can really hit the end of the pin to dislodge it... Once it has been moved (unfrozen) then use
a nail to push it completely out..
I hope this is of some help..
A pin punch would do the job easily. Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
jenz58
Scirocco Rare
Postal Menace
Posts: 9121
Threads: 230
Registered: August 26th, 2002
Member Is Offline
Location: croydon, melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruisy
|
| posted on September 15th, 2003 at 09:56 AM |
|
|
I've been hammering at the pins from both directions:cussing
Thought it might loosen them or one way may happen easier etc:jesus |
|
|
oval TOFU
Son of Jim - Creator of Good
Bitte, ein Bit!
Posts: 2946
Threads: 234
Registered: July 10th, 2003
Member Is Offline
Location: Pt Cookie, Melburg
Theme: UltimaBB Pro Grey
Mood: :booM
|
| posted on September 15th, 2003 at 02:11 PM |
|
|
try a punch- its like a screw driver in that it has a plastic handle and all, but the tip is a point rather than a flathead or phillips driver...
Obviously get one thats about the same diameter as the pins you are trying to drive out.... a bit of WD40 probably wouldn't hurt either..
:thumb
...and Robert's ya father's brother...
|
|
|
jenz58
Scirocco Rare
Postal Menace
Posts: 9121
Threads: 230
Registered: August 26th, 2002
Member Is Offline
Location: croydon, melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruisy
|
| posted on September 15th, 2003 at 09:00 PM |
|
|
Soaked it in WD 40 but will go get a punch drive thingy:thumb
Well they are the words I will probably use if I have to ask:jesus |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on September 15th, 2003 at 10:27 PM |
|
|
Pin Punch needed for Jen
Jen
take one of the pins You have taken out so the tool people will know what size You need. its called a Pin Punch and its All steel - no plastic handle
- and it shouldn't be all that expensive....
Best of luck..
Jen, if I lived close by I'd do it for You...
regards Lee
_______
l_______l======== Pin Punch
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
jenz58
Scirocco Rare
Postal Menace
Posts: 9121
Threads: 230
Registered: August 26th, 2002
Member Is Offline
Location: croydon, melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruisy
|
| posted on September 15th, 2003 at 10:36 PM |
|
|
Wow, 19 replies for getting two little pins out
It's a bit like micro surgery maybe:o
Thanks Lee. I hope I don't loose the bl14dy pin if I take it somewhere cos I've got it nice and safe right now. Tiny little buggers
P.S. PIN PUCH WORKED WITH A LOT OF HARD HITTING
why am i yelling
All trims are off:thumb
[Edited on 18-9-2003 by jenz58] |
|
|
