| [ Total Views: 567 | Total Replies: 10 | Thread Id: 13485 ] |
|
|
 62deluxe
Custom Title Time!
Posts: 1718
Threads: 80
Registered: November 16th, 2002
Member Is Offline
Location: hobart
Theme: UltimaBB Pro Blue ( Default )
Mood: KdF WERKED OUT
|
| posted on September 19th, 2003 at 10:24 AM |
|
|
urgent! Intake manifold paint
Urgent urgent urgent...
I need to know what type of paint I can use on the intake manifold of a 36hp. It is a stock resto so I need to use the original GLOSS grey. The
problem is that it needs to be high-temp resistant because of the pipe running off the exhaust. I don't want to paint it silver! I've heard
of ceramic coating but no-one in tassie seems to do it! HELP
|
|
|
PurpleT3
Fahrvergnugen
Posts: 880
Threads: 55
Registered: April 8th, 2003
Member Is Offline
Location: Knox, Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: knackered
|
| posted on September 19th, 2003 at 12:33 PM |
|
|
You might want to check out the POR 15 range of products. The do a high temp(500-600C) paint in a colour they call "manifold grey". The
normal POR 15 also comes in a grey, which they claim is tested up to 300C. It's expensive compared to normal paint, but has a good reputation.
See thier australian agents web site for details. http://www.ppc.au.com. (thats
correct, it's not a typo...ppc.au.com)They do mail order.
Ain't nothin' like the wind in your hair.
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on September 19th, 2003 at 01:36 PM |
|
|
I used POR manifold grey on my exhaust. It was about $33 for 250ml.
I sandblasted the exhaust, then painted it. It lasted for a couple of weeks with no probs.
It never drys, I accidentally got some WD40 on it, and it washed off.
And now it has started to peel in places (3 or so weeks old).
So it works ok, but it isn't magical.
My mate used to paint his exhaust with aluminium kill rust. It would smoke and stink the first few times, but then seemed to stay on quite well. I
painted my cylinder tin with blue kill rust a few times and it lasted quite well. A grey kill rust might work ok.
|
|
|
kombikim
A.k.a.: Kim
Custom Title Time!
disfunctionally capable
Posts: 1521
Threads: 84
Registered: December 18th, 2002
Member Is Offline
Location: Sydney, Concord West
Theme: UltimaBB Pro Blue ( Default )
Mood: always bleary
|
| posted on September 19th, 2003 at 01:46 PM |
|
|
I too was amazed with Killrust, about 7 years ago I paited the cast iron Exhaust manifold of my Humber with aluminium coloured killrust, no
preparation whatsoever, so that it would look good for a coupla days, it still looks OK now:jesus
Please, I need drivers side window regulator (winder mechanism) for my '54  |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on September 19th, 2003 at 03:24 PM |
|
|
VHT High Temp spray cans of Paint..
You can buy VHT High Temp spray cans of paint at most Auto shops and Big W or Kmart for under $20. I have been painting all My (non VW) exhaust
manifolds white for years and they never peel off... I have painted My VW inlet manifold with Yellow paint... so I am expecting the paint on the
heater pipe to either peel off or discolour.... Lee
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
VDUBXTC
A.k.a.: Jace
Wolfsburg Elder
Tea Bag
Posts: 3587
Threads: 678
Registered: February 21st, 2003
Member Is Offline
Location: Somewhere on the South side Brissy QLD
Theme: UltimaBB Pro Navy
Mood: swept off my feet by an Ang3l
|
| posted on September 19th, 2003 at 03:35 PM |
|
|
VHT hightemp paints
these are the way to go, i've used them on my exhausts and my manifolds. only prob i had on one ocassion was i didn't leave it long enough
to dry before starting my engine. since leaving it for a day or 2, i have never had to use it twice on anything..........................jace 
|
|
|
62deluxe
Custom Title Time!
Posts: 1718
Threads: 80
Registered: November 16th, 2002
Member Is Offline
Location: hobart
Theme: UltimaBB Pro Blue ( Default )
Mood: KdF WERKED OUT
|
| posted on September 19th, 2003 at 11:01 PM |
|
|
The only problem with the VHT paint is that it is matt not gloss. I am tying to restore my 59 to original spec so it really needs to be gloss grey.
might have a look at por-15 or killrust? Thanks for all the help guys!:kiss
[Edited on 19-9-2003 by 62deluxe]
|
|
|
Grey 57
A.k.a.: Dean
Son of Jim - Creator of Good
Old Grey Cruiser
Posts: 2937
Threads: 355
Registered: August 25th, 2002
Member Is Offline
Location: Phillip Island
Theme: UltimaBB Pro Blue ( Default )
Mood: (OoVoO) (OVO).
|
| posted on September 20th, 2003 at 07:25 AM |
|
|
What about powder coating. Will that stand up to fuel, temps ect in an engine bay.
|
|
|
koolkarmakombi
Veteran Volks Folk
enkarmarising
Posts: 2078
Threads: 158
Registered: June 16th, 2003
Member Is Offline
Location: viva brisvegas
Theme: UltimaBB Pro Blue ( Default )
Mood: do you see the bats?
|
| posted on September 20th, 2003 at 08:35 AM |
|
|
maybe find out what it was originally painted with. High temp? Powder coat? Polished with alpine pollen? High temp paint comes in a variety of
colours flavours and textures, I have used black high temp on it for over a year on the 1600 bus and it still looks great. I have seen other brands
than VHT with gloss finishes. Try a few different brands of shopor ask a local hotrod/exhaust shop, I reckon they will point you in the right local
direction
kkk |
|
|
PurpleT3
Fahrvergnugen
Posts: 880
Threads: 55
Registered: April 8th, 2003
Member Is Offline
Location: Knox, Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: knackered
|
| posted on September 20th, 2003 at 01:24 PM |
|
|
Wes, I'm curious, did you use the hi temp POR or the regular type. If you used the hi temp, did you bake it at 180C before use. I ask cos I
have bought some, if it's not gonna work I won't bother using it. Cheers.:beer
Ain't nothin' like the wind in your hair.
|
|
|
TheGermanFolks
Officially Full-On Dubber
Posts: 248
Threads: 14
Registered: March 4th, 2003
Member Is Offline
Location: USA
Theme: UltimaBB Pro Blue ( Default )
Mood: Beer
|
| posted on September 20th, 2003 at 04:35 PM |
|
|
i used powdercoating on mine. it does fine on the heat. the only thing is to make sure that you dont have a leaky carb. it will yellow the
powdercoating a little bit.
Scott R.
PRAISE THE LOWERED
 |
|
|
62deluxe
Custom Title Time!
Posts: 1718
Threads: 80
Registered: November 16th, 2002
Member Is Offline
Location: hobart
Theme: UltimaBB Pro Blue ( Default )
Mood: KdF WERKED OUT
|
| posted on September 21st, 2003 at 12:08 AM |
|
|
Thanx german folker. I talked to the guy that powder coated all my tinware but he wouldn't say that it wouldn't burn but if you have tried
it then that's good enough for me! Powder coating is certainely the best finish.
Cheers everyone for your help!!:beer
[Edited on 20-9-2003 by 62deluxe]
|
|
|
koolkarmakombi
Veteran Volks Folk
enkarmarising
Posts: 2078
Threads: 158
Registered: June 16th, 2003
Member Is Offline
Location: viva brisvegas
Theme: UltimaBB Pro Blue ( Default )
Mood: do you see the bats?
|
| posted on September 21st, 2003 at 07:17 AM |
|
|
Stuff I paint with hi temp/engine type paints gets scrubbed with degreaser and a wire brush, then washed it a bucket of hot soapy water, rinsed in
another bucket of hot water and then dried with compressed air.
Gets hung from a wire and given light coats of paint about 5 min-10 min apart. Kind of mist, let flash off, mist again. I usually get it covered in
about 4-5 mist coats. This does not mean the paint is thick. I usually then hang it in the sun for a day then it can get fitted straight away or up
to ages later when I need that bit.
If Im painting stuff I try and paint a few things so its worth setting up for a few hours and doing other bits too.
The first time I run the engine it can fume a bit. Dont assemble it with oily fingers. I find the heat in the engine bay cures it to required
hardness. After a week or so it is spannerproof.
If I put painted stuff to thermal cycle or bake in my babe wifes new Italian stainless cafe oven I would be living in my kombi with the dogs on a
mostly permenant basis with painted parts inserted painfully........then my bus wouldnt run...... and that would be a crime!
kool karma to you |
|
|
