Posts: 657
Threads: 138
Registered: June 23rd, 2003
Member Is Offline
Location: sydney, north side.
Theme: UltimaBB Pro Blue ( Default )
Mood: lost
posted on January 18th, 2004 at 09:50 PM
narrowed bus beam?
Hey people, i am thinking about building a narrowed beam for my bus and was just wondering what are the benifits of doing it? Will i be able to lower
my bus more?
Thanks, Alex.
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
posted on January 18th, 2004 at 10:31 PM
depends what wheels you want....
i don't think it's really necessary unless your gonna have big wheels (wide 17s or sumthin).
you can get it plenty low by just welding in adjusters, a lot less work than narrowing!!!!
kai
Adam_C
Custom Title Time!
Posts: 1180
Threads: 164
Registered: May 22nd, 2003
Member Is Offline
Location: Bargo, 1hr south of syd
Theme: UltimaBB Pro Blue ( Default )
Mood: could be lower
posted on January 19th, 2004 at 09:35 AM
narrowing the beam will bring the wheels inside the sarches and stop them rubbing on the outside of the arches when you turn, if your going super low
you can cut the arch out that is under the from seats and raise it so the larger wheels will not rub up the top, in effect you r tubbing it, but be
sure to make the area inclosed with sheetmetal, just raise it,
?
