| [ Total Views: 549 | Total Replies: 7 | Thread Id: 19569 ] |
|
|
 EgeWorks
Wolfsburg Wizard
Posts: 602
Threads: 52
Registered: January 18th, 2004
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Black
Mood: No worries
|
| posted on February 26th, 2004 at 01:03 PM |
|
|
Shell/suspension woes. Help me please!
Ok here is my problem. The right hand side of my car (73' super, 1302 suspension) sits lower than the left by about a half inch. I've
checked suspension i.e. struts, springs, shocks, torsion bar, and all seems symetrical.
Now the next weird thing is that the body seems to be laterally out of allignment or something, as in it's sitting about a half inch to the right
of where it's supposed to be, but only at the back. As I said before the rear suspension seems to check out ok.
I only noticed this recently as I put much fatter wheels on and they stick out on one side.
The shell and suspension were supposedly set up by an expert as I bought the car from a vw mechanic but since I've owned it have found heaps of
little bits that were done badly/cheaply so I'm not convinced of his "expert" status.
Is there some gurus out there that may be able to help me out with this prob, or at least pinpoint what it might be?
Sorry for the long post.
|
|
|
Secoh
Fahrvergnugen
Posts: 926
Threads: 97
Registered: September 20th, 2002
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Rarin' to
|
| posted on February 26th, 2004 at 01:44 PM |
|
|
out with the tape measure! could have smacked a gutter or been in a crash and have bent suspension or pan.
If it aint broke,
Make it go faster!!  |
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12780
Threads: 734
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 26th, 2004 at 02:03 PM |
|
|
I amm guessing the front end @ the pan head is a bit bent.
Futue te ipsum!!!
|
|
|
VWCOOL
23 Windows of Awesome
Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline
Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help
|
| posted on February 26th, 2004 at 05:35 PM |
|
|
Half an inch is no big deal. Tolerances on these were slack, and a bent mudguard or something over the years can make things look skew. If its sitting
low on one side, you can adjust the torsion bar (coupla hours job) on one side to jack it back up. I've done this heaps over the years - if
you're real keen on handling, do all your measurement of ride height with someone sitting in the car
Pay your debts, CxxT
|
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12780
Threads: 734
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 26th, 2004 at 05:58 PM |
|
|
Should have asked before
How does it drive???
Go straight??
Crab to one side???
May be start by measuring the bodywork
Guards etc from body to side.
Have to admit i have seem many a guard that looked ok but was a mile out
Futue te ipsum!!!
|
|
|
EgeWorks
Wolfsburg Wizard
Posts: 602
Threads: 52
Registered: January 18th, 2004
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Black
Mood: No worries
|
| posted on February 26th, 2004 at 06:10 PM |
|
|
It drives ok, was getting a little rear end sway with the stock wheels, but that has gone now. I can drive pretty well straight with no hands, it may
need a bit of an allignment but nothing serious. It does have a damaged right front guard, the impact was from someone hitting my car in a parking
lot. Only panel damage, it was very light.
I'll get out the tape measure tomorrow to check all the relevent stuff, see if I can get a bit more info.
|
|
|
BiX
Veteran Volks Folk
Posts: 2499
Threads: 154
Registered: September 2nd, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 27th, 2004 at 05:15 PM |
|
|
The front end of mine was out by 20mm in some directions and that was before a hit!!! just something you have to live with. But go and get a good 4
wheel alingment.
I have no sympathy for my car, only the wallet that pays for it!
Go hard or go home!!!!
|
|
|
EgeWorks
Wolfsburg Wizard
Posts: 602
Threads: 52
Registered: January 18th, 2004
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Black
Mood: No worries
|
| posted on February 28th, 2004 at 10:16 AM |
|
|
OK, I got out the tape and things don't seem too bad. The only wheel that is a bit funny is left rear, it is sticking out 10mm (measured from the
torsion plate thing) than the one on the other side. I'm gonna get it up on some blocks today so as I can get a good look underneath.
The height problems seem ok. The rear suspension is fine after mesaurements. The front is still a little wonky on RHS, but as far as I can tell it is
the spring and/or shock as they are pretty old.
In conclusion I think it is safe to say that I'll have to save some dough to get some nice new front struts (I like the look of V-Force, just
need $$$) and play around with the rear to figure out exactly what's going on.
Thanks for your comments people.
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on February 28th, 2004 at 10:31 AM |
|
|
Your Car may have diferent guards on the rear.. Standard & Super beetles rear guards do fit each other, but My Son tells Me that the early
beetle guards are flatter on the outside.. so maybe they are a diferent width too.. also measure from the body, under the guard to the guard edge on
both sides... and see if both guards measure the same....
Best of Luck
Lee Noonan
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
EgeWorks
Wolfsburg Wizard
Posts: 602
Threads: 52
Registered: January 18th, 2004
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Black
Mood: No worries
|
| posted on March 2nd, 2004 at 08:07 AM |
|
|
The guards are slightly different on either side but have the same measurements. Anyway, I've been mucking around too long with this crap now, I
bit the bullet and booked it in to be taken care of by a pro. It needs a service anyway.
Again thanks for your help guys.
|
|
|
