Posts: 6
Threads: 6
Registered: February 4th, 2003
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Perplexed
posted on February 11th, 2003 at 09:39 AM
No Brake Lights
My Brake Lights Went out. Both Bulbs are good, fuses are good, but inspection of master cylinder shows no power through pressure switch when ignition
on and peddle down. (M/C only has 1, 2 prong switch.) Have I done enough tests, and if so, do I need to bleed M/C to remove switch and replace.:bounce
micbec
Learner Dubber
Posts: 7
Threads: 3
Registered: February 6th, 2003
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
posted on February 11th, 2003 at 09:52 AM
I had the same problem. We replaced the brake light switch, no more problem. Didn't need to bleed the brakes though.
:beer
amazer
Bishop of Volkswagenism
kombi pilot
Posts: 3187
Threads: 308
Registered: August 26th, 2002
Member Is Offline
Location: Wollongong
Theme: UltimaBB Pro Blue ( Default )
Mood: Peachy!
posted on February 11th, 2003 at 09:55 AM
Ditto. Just be quick.
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
posted on February 11th, 2003 at 09:52 AM
