[ Total Views: 894 | Total Replies: 7 | Thread Id: 37816 ] |
|
Kombrick
Casual Dubber
Posts: 23
Threads: 5
Registered: June 24th, 2004
Member Is Offline
Location: Maryborough, Qld
Theme: UltimaBB Pro Blue ( Default )
Mood: Optimistic
|
posted on April 17th, 2005 at 06:41 PM |
|
|
Electronic Ignition Conversion
Hi All,
A few months back I stumbled on an article while tooling around on the net on various techo things VW by some guy in the U.S., and among
other things he detailed how to convert a Kombi (or possibly any VW donk, can't remember exactly) engine to electronic ignition using a Jap dizzy,
possibly off a Toyota. I didn't take note of the web adress, but now realise I should have, as mine's had the Richard and it might be a nifty mod to
do.
If anyone out there's got the adress, or the info, I'd appreciate hearing from you, as setting the points every 300 k's is getting a
little tiresome.
Cheers,
Ian
|
|
helterskelter400
Fahrvergnugen
Posts: 900
Threads: 62
Registered: August 25th, 2002
Member Is Offline
Theme: UltimaBB Pro Grey
|
posted on April 17th, 2005 at 06:46 PM |
|
|
i've read that (prob on here too) with little mods could yeild you a magna dizzy in place. or you could do what lots people have done (incl myslef)
and chuck a little aftermarket electronic points kit in the dizzy you got.
:thumb
|
|
Kombrick
Casual Dubber
Posts: 23
Threads: 5
Registered: June 24th, 2004
Member Is Offline
Location: Maryborough, Qld
Theme: UltimaBB Pro Blue ( Default )
Mood: Optimistic
|
posted on April 18th, 2005 at 04:48 PM |
|
|
Cheers Helterskelter,
Might chase up that option, the problem as far as I can see is that the bushing in the centre shaft that turns the
actuating cam for the points appears to be worn ( very sloppy), so I'm probably up for a new dizzy anyway,
Thanx for the reply,
Ian
|
|
helterskelter400
Fahrvergnugen
Posts: 900
Threads: 62
Registered: August 25th, 2002
Member Is Offline
Theme: UltimaBB Pro Grey
|
posted on April 18th, 2005 at 05:05 PM |
|
|
i wouldnt have thought so. the elect points kits have a big flat plastic washer with magnets for each fire. this just slips over the dizzy shaft. you
then replace the points with a little sensor that triggers as each magnet wisses past.
check this post too.
http://www.aussieveedubbers.com/forum/viewthread.php?tid=37701#pid337320
:thumb
|
|
dusto81
Officially Full-On Dubber
Posts: 229
Threads: 41
Registered: February 23rd, 2005
Member Is Offline
Location: Melbourne, Vic
Theme: UltimaBB Pro Blue ( Default )
|
posted on April 19th, 2005 at 02:03 PM |
|
|
Yeh go for the electronic ignition! Does wonders and you don't have to reset timing once it's set. You could just get a new 009 pretty cheap on ebay
and then by the ignition module.
Cheers,
Dustin
|
|
Kombrick
Casual Dubber
Posts: 23
Threads: 5
Registered: June 24th, 2004
Member Is Offline
Location: Maryborough, Qld
Theme: UltimaBB Pro Blue ( Default )
Mood: Optimistic
|
posted on April 19th, 2005 at 02:56 PM |
|
|
Cheers Guys, this and the other link have given me much food for thought, it appears the options are many and varied!! Many thanx to all,
Ian
|
|
ClassicVW(pacific)
Banned
Posts: 1627
Threads: 141
Registered: July 23rd, 2004
Member Is Offline
Location: Gold Coast Australia
Theme: UltimaBB Pro Blue ( Default )
|
posted on April 19th, 2005 at 05:18 PM |
|
|
#! Message No Longer Available !#
|
|
dusto81
Officially Full-On Dubber
Posts: 229
Threads: 41
Registered: February 23rd, 2005
Member Is Offline
Location: Melbourne, Vic
Theme: UltimaBB Pro Blue ( Default )
|
posted on April 21st, 2005 at 03:29 PM |
|
|
Go the pertronix, I turn the key and the engine instantly springs to life with absolutely no cranking!
|
|