| [ Total Views: 1304 | Total Replies: 22 | Thread Id: 41323 ] |
|
|
 NigeType3
Officially Full-On Dubber
Posts: 371
Threads: 32
Registered: December 20th, 2002
Member Is Offline
Location: Perth W.A.
Theme: UltimaBB Pro Blue ( Default )
Mood: Speedy
|
| posted on July 5th, 2005 at 04:49 PM |
|
|
Intermitent wiper setup
Has anyone put a intermitent wiper setup in there car?
I remember 15 years ago you could buy a universal kit for seventies cars that didn't have it. Complicated little buggers to wire up but they
worked.
Dose anyone know of such a thing exists at all from say repco or some of the other car places.
I getind a sore arm turning the wipers on and of all the time its realy sh*ting me off.
Thanks in advance Nige
|
|
|
Che Castro
Custom Title Time!
ankle straps
Posts: 1945
Threads: 79
Registered: August 25th, 2002
Member Is Offline
Location: Sydney, Australia
Theme: UltimaBB Pro Blue ( Default )
Mood: (( }:-{D]
|
| posted on July 5th, 2005 at 07:25 PM |
|
|
I have been thinking about this too, I think jaycar may have a kit? Otherwise you could just get a module from another car at the wreckers and adapt
it somehow..
Jon
|
|
|
HotRodMatt
Wolfsburg Elder
If it's old or rare - cut it!
Posts: 3616
Threads: 361
Registered: September 3rd, 2002
Member Is Offline
Location: West of Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 5th, 2005 at 07:31 PM |
|
|
I've seen a variable dial set up from an early 80s S[t]igma used in a VW before. It has a wind up reisistor that doesn't make the wiper intermittent
but slow thru to medium, then two clicks for the normal 2 speed.
|
|
|
General_Failure
A.k.a.: Tristan
Custom Title Time!
Use your head, don't abuse it!
Posts: 1036
Threads: 107
Registered: June 15th, 2004
Member Is Offline
Location: Peaceful Finley, NSW
Theme: UltimaBB Streamlined2
Mood: Not too bad. Thanks for asking!
|
| posted on July 5th, 2005 at 08:43 PM |
|
|
I think jaycar has it. I'll have to look at the catalog though.
If at first you don't succeed. Build, build again.
Vehicle: 1975 Special order delivery walkthrough panel based LCA pop-top camper. Motor: Nippon 1.8L Single port Wasserboxer, Transmission: 3 rib 002.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on July 5th, 2005 at 10:14 PM |
|
|
Hi
I fitted a factory one to my yellow bug, it used a Golf 1 relay (pn# 111 955 531) and the later style beetle wiper switch.
Steve
|
|
|
Doug Sweetman
Veteran Volks Folk
Nil Bastardo Carborundum
Posts: 2128
Threads: 58
Registered: September 23rd, 2002
Member Is Offline
Location: Perth, W.A
Theme: UltimaBB Pro Blue ( Default )
Mood: sweeeeet 
|
| posted on July 5th, 2005 at 11:58 PM |
|
|
How late is the later style Steve ?
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on July 6th, 2005 at 09:01 AM |
|
|
Hi
Wiper switch on the steering column, 72 or later. Some of the original switches dont have the extra wire fitted, all new switches have the extra wire,
some even have a 12 volt out that operates when you pull on the wiper switch, ideal for electric washers.
Steve
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on September 15th, 2006 at 09:01 PM |
|
|
Hi
Found this on the Hella site and bought one, they retail for about $100. Or visit the site http://db.hella.com.au/cgi-bin/catalogue.pl?flcmd=preview&flmaint=365
Steve
|
|
|
shaihulud
Custom Title Time!
Posts: 1448
Threads: 197
Registered: November 4th, 2005
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 16th, 2006 at 01:24 AM |
|
|
The Fiat 2300S has a switch like an old style headlight dipper switch on the floor beside the left foot. A press of the button causes one sweep of the
wipers at slow speed. To hold the button down causes them to sweep continuously until the button is released. My passengers used to be fascinated that
the car seemed to know when to wipe the window as it used to occur randomly. I had a lot of fun telling them that the car had a sensor on the bottom
of the widscreen because as I was driving my hands did not leave the steering wheel.
I have to have a soft modern steering wheel in my Manx SR and it has two horn buttons at the ends of the spokes. I am considering making one of them
the horn button and the other an intermittent windscreen wiper switch. I'll need to ask my engineer first.
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on September 16th, 2006 at 10:13 PM |
|
|
all the beetle bodies I have seen still have the round place to screw a dipper switch...
actually one on either side..
I bought an intermittant windscreen wiper switch that has the early VW ivory knob on it...
it looks like it was made that way...
Only problem is. I don't have any paperwork or circuit diagrams etc.. for it...
I do however have another one... somewhere..
I'll have to find it and install it, before the next rainy season... lol:P:P
I haven't a clue where it is....
I did make one from a kit years ago and installed it in My L300 Mitsubishi....
Lee -- 68AutoBug --
http://community.webshots.com/user/vw68autobug
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
lugnuts
A.k.a.: Mike
Custom Title Time!
Posts: 1070
Threads: 88
Registered: August 28th, 2002
Member Is Offline
Location: Sydney,Castle Hill
Theme: UltimaBB Pro Blue ( Default )
Mood: semi-retiring
|
| posted on September 16th, 2006 at 11:17 PM |
|
|
http://www.apogeekits.com/windshield_wiper_control.htm
Dont listen to what they say,just watch what they do.Oh yeah ive NEVER finished anything ive started.:o
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on January 29th, 2009 at 07:05 AM |
|
|
I just built this circuit, and it actually works!
http://www.techlib.com/files/wiperkik.pdf
I changed some of the resistor sizes to get the timing I wanted. I am using a wiper stalk from an MX6 and wanted to use it's intermittent dial (which
was 100k not 500k as on the circuit). So I changed some of the other resistor sizes and experimented with different capacitors. In the end I have
intermittent adjustment from 3 to 30 seconds.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on January 29th, 2009 at 07:34 AM |
|
|
I fitted them to my 65 bug
get a 2 speed wiper from later model and a modul from a golf
|
|
|
1500S
Custom Title Time!
Posts: 1418
Threads: 73
Registered: March 28th, 2005
Member Is Offline
Location: Nth Richmond, N.S.W
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 29th, 2009 at 01:39 PM |
|
|
| Quote: | Originally
posted by NigeType3
Has anyone put a intermitent wiper setup in there car?
I remember 15 years ago you could buy a universal kit for seventies cars that didn't have it. Complicated little buggers to wire up but they
worked.
Dose anyone know of such a thing exists at all from say repco or some of the other car places.
I getind a sore arm turning the wipers on and of all the time its realy sh*ting me off.
Thanks in advance Nige
|
K-Mart at Blacktown had them but that was ....er...... before 1980! I had it on a 1972 SB. The only problem fitting it was determining the "type"
of electric motor on the wiper. There were two wiring setups on this switch and if you chose the wrong one there was a short circuit when it
activated.
DH
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on February 2nd, 2009 at 05:20 PM |
|
|
I went to put the circuit I posted above into my car on the weekend (I hadn't tested it in the car yet) and I found out it sucked! It sucked all my
precious electrons!
I wired it into my existing wiper circuit (with the motor) which I had a 15 amp fuse on, and it blew the fuse. So I upped it to 30amp and then it
worked, but whenever the little intermittent circuit triggered the relay it made everything else in the car go dim. So I figured it was a very power
hungry circuit and perhaps not what I am looking for.
So I will be checking it and then trying another option...
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on February 2nd, 2009 at 11:20 PM |
|
|
Hi
Lucky it didn't let the smoke out of the box, you all know that its smoke that powers things not electricity.
Steve
|
|
|
barls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
Posts: 9467
Threads: 295
Registered: June 22nd, 2004
Member Is Offline
Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices
|
| posted on February 3rd, 2009 at 04:03 PM |
|
|
electrical theory of smoke by mr lucas.
its a classic i use it at work.
|
|
|
lexm
Commited Dubber
Posts: 57
Threads: 0
Registered: April 5th, 2004
Member Is Offline
Location: Brisbane Qld
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 3rd, 2009 at 07:00 PM |
|
|
| Quote: | Originally
posted by Baja Wes
I went to put the circuit I posted above into my car on the weekend (I hadn't tested it in the car yet) and I found out it sucked! It sucked all my
precious electrons!
I wired it into my existing wiper circuit (with the motor) which I had a 15 amp fuse on, and it blew the fuse. So I upped it to 30amp and then it
worked, but whenever the little intermittent circuit triggered the relay it made everything else in the car go dim. So I figured it was a very power
hungry circuit and perhaps not what I am looking for.
So I will be checking it and then trying another option...
|
Wes
That's because of the park circuit I suspect.
In the diagram posted by 1303steve above note that term 53a is connected to 12v and term 53e is connected to the motor via the off switch. The other
side of the cam switch is connected to ground and this brakes the motor to a stop. So when the wiper is parked, the slow speed terminal 53 is
connected to ground via the wiper switch and cam switch contact.
To wipe intermittently you need a changeover relay to break the circuit from the switch to the wiper term 53 and connect 12v until the motor moves
away from park and then restore the connection so the wiper will park again.
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on February 3rd, 2009 at 09:05 PM |
|
|
put wiper switch on then off every so often works for me..
especially when i haven't put the rain ex on the screen then no wipers needed at all.. top stuff rain ex..
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on February 5th, 2009 at 10:24 AM |
|
|
The transistor circuit that I posted even used a lot of power before I had it connected to the wipers. When I was bench testing it I used a 4amp
charger and that didn't have enough power to power the circuit when it tried to trigger the relat.
I have now built a 555 timer chip circuit, set-up as an oscillator. It lets me vary the intermittent wipers between 3 and 30seconds using the MX6
stalk variable resistor. It seems more reliable in it's timing. It runs off the 4 amp charger no problems when switching the relay.
But when I connected it to the car and the wiper switch / motor, I still saw a lot of power being used when it tried to switch the relay and start the
wipers moving. The lights went dim again. So I must have something not quite right in the wiper switch / wiper motor wiring.
I need to stare at the wiper switch circuit board and the schematic again. The circuit board doesn't really match this diagram.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
lexm
Commited Dubber
Posts: 57
Threads: 0
Registered: April 5th, 2004
Member Is Offline
Location: Brisbane Qld
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 5th, 2009 at 11:21 AM |
|
|
Wes
Are you breaking the park circuit when you connect to the wipers? Read my post above.
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on February 5th, 2009 at 02:05 PM |
|
|
Lex,
I have it autoparking and have tried breaking the autoparking power with a double acting relay but it didn't do anything. The thing I don't have
working is the grounding both sides of the motor when it is parked. I will play with it tonight.
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on February 5th, 2009 at 10:10 PM |
|
|
Ok, I have it all wired as per the Mazda diagram, but with a 555 timer doing the intermittent wipers, and it's working great!
The only thing I haven't quite got sorted is the windscreen washer. By the Mazda diagram it can also trip the intermittent relay, which would require
a relay with two seperate activation coils or something strange??? I can probably get both circuits to trip the one relay if I use a few diodes
perhaps....
|
|
|
