| [ Total Views: 757 | Total Replies: 11 | Thread Id: 42320 ] |
|
|
 seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 31st, 2005 at 09:50 PM |
|
|
subaru idle ?
My ej20 is now running , but the ERG valve opens and closes , so the motor runs up and down .
can some one give me a run down what this valve does for the subaru motor & what may be the cause of this .
cheers seagull
God are you there ??
Looking for that special lady : PM me for coffee & cake
|
|
|
subaruboxer
Officially Full-On Dubber
Posts: 292
Threads: 20
Registered: January 1st, 2005
Member Is Offline
Location: North Germany
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 1st, 2005 at 01:16 AM |
|
|
Hi Neil,
the EGR system is used to lower NOx (oxides of nitrogen) emission levels caused by high combustion temperatures. The EGR recirculates a small amount
of exhaust gases into the intake manifold. The additional mixture lowers the temperature of combustion thereby reducing the formation of NOx
compounds.
The system is equipped with an EGR valve, a backpressure transducer(BPT), and the vacuum lines connecting the various components. And the ecu of
course. The BPT controlls the vacuum pressure to control the amount of EGR according to the engine load. The EGR valve is opened in response to the
vacuum signal from the EGR control solenoid which is controlled by the ecu. The ecu detects engine driving conditions from the various sensors and
translates the information into the correct On/Off EGR time.
Jörg
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 1st, 2005 at 01:54 AM |
|
|
WOW , very interesting reading , so sitting there on idle would seem fine Jorg ?
Looking for that special lady : PM me for coffee & cake
|
|
|
subaruboxer
Officially Full-On Dubber
Posts: 292
Threads: 20
Registered: January 1st, 2005
Member Is Offline
Location: North Germany
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 1st, 2005 at 03:50 AM |
|
|
It should not go up and down, or the valve should not open and close, like you say it does. Make sure it is all connected right. The little hoses and
the wire to the ecu.
But maybe there is another reason for your idle to go up and down.
Jörg
|
|
|
kombibob
Custom Title Time!
AKA: Volkswagen Type 2 Transporter Van Robert
Posts: 1698
Threads: 173
Registered: May 15th, 2004
Member Is Offline
Location: noosa hinterland
Theme: UltimaBB Psyche Grey
Mood: at by cows
|
| posted on April 18th, 2006 at 08:41 PM |
|
|
hey seagull did you sort this one out?
my ej20 does the same thing idles up then drops down etc.
thanks
bob
1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
|
|
|
555bug
Custom Title Time!
WRX Bug Boy
Posts: 1123
Threads: 79
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Vintage
Mood: turbo charged
|
| posted on April 18th, 2006 at 09:05 PM |
|
|
I can't say for certain this is the case but this "hunting" is a by product of the ECU not knowing its base idle speed (well in other ricers
anyway) basically the car is dropping the reves to low, detecting a potential stall then spooling up. I have fixed this a number of times for friends
in various models of Honda. In the case of the Honda you generally remove a fuse (clock, interion light etc..) this lets the ECU know a change is
comming, you disconnect the idle control valve, start the car and try to hold it at 1500 ish (bloody hard as it will be hunting like a mofo) for 10
seconds. At this point the ecu is now ready to take a new idle speed and this is set in the old fashion way with a screwdriver. Anyway thats how a
couple of Jap brands do it so hit your Suby manual to get this sorted.
Stephen |
|
|
gull
Wolfsburg Wizard
Posts: 446
Threads: 34
Registered: June 30th, 2005
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 19th, 2006 at 10:59 AM |
|
|
Andrew sent me a ecu from his car , that sort of fixed the problem for a day & now its back with more issues .The ej20 n/a motor is a pain in the ass
.due to little infomation with the ecu .Thanks to Jorge I got the Mistres running ( thanks mate ) .I will replace the ecu at some stage as its driving
me mad or if Jorge come down at some stage I will get him to have a look + buy him many beers :party
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on April 19th, 2006 at 01:07 PM |
|
|
are you sure it has an EGR valve?
Weren't they mostly on 80s carbie cars? I think your thinking of the idle control valve. It's adjustable you know, you can loosen the screws and
turn it til the idle speed is ok.
|
|
|
gull
Wolfsburg Wizard
Posts: 446
Threads: 34
Registered: June 30th, 2005
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 19th, 2006 at 01:33 PM |
|
|
come over and fix it for me Pete
|
|
|
speedster356
A.k.a.: Peter Mcleod
Custom Title Time!
Plastic not Classic Racing
Posts: 1624
Threads: 256
Registered: August 25th, 2002
Member Is Offline
Location: CHRIST church NZ
Theme: UltimaBB Pro Blue ( Default )
Mood: Producing boost again in NZ
|
| posted on April 19th, 2006 at 03:21 PM |
|
|
Kinda sounds like the idle up valve. Mine did that when I first started it up but settled down after a while. Check for vac leaks as well. See what
happens when you disconnect the idle valve plug? I wouldn't start adjusting the valve just yet as they are a biatch to get set again.
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
|
|
|
72RSbug
Officially Full-On Dubber
Posts: 266
Threads: 49
Registered: January 4th, 2005
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 19th, 2006 at 06:42 PM |
|
|
where is this idle valve plug located on the engine(I assume it's the same on al EJ20's)?
|
|
|
speedster356
A.k.a.: Peter Mcleod
Custom Title Time!
Plastic not Classic Racing
Posts: 1624
Threads: 256
Registered: August 25th, 2002
Member Is Offline
Location: CHRIST church NZ
Theme: UltimaBB Pro Blue ( Default )
Mood: Producing boost again in NZ
|
| posted on April 19th, 2006 at 07:31 PM |
|
|
Looking at the engine from the front (cam covers) it's located on the right and rear of the inlet manifold. It has a tan coloured plug. The valve has
a pipe/hose about 20mm that comes from it and goes into the intake down stream of the AFM. It shou;ld have A.B.C on the top of it I think.
[ Edited on 19-4-2006 by speedster356 ]
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
|
|
|
