Posts: 43
Threads: 17
Registered: March 28th, 2003
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on April 8th, 2003 at 05:12 PM
Carb synchronisation
Does anyone have any words of wisdom for someone trying to synchronise the carbys on a 2.0l Kombi ? Is there a trick tool available other than using
vacuum gagues ?
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12780
Threads: 734
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
Posts: 39
Threads: 2
Registered: September 30th, 2002
Member Is Offline
Location: Caves Beach NSW
Theme: UltimaBB Pro Blue ( Default )
posted on April 9th, 2003 at 10:02 AM
If you have the stock solex carbs with the central idling system a syncrometer WILL NOT help.
Disconnect the right carb linkage
look down the throat of the carb (after opening the choke ) if the throttle butterfly has a small hole in it then you just adjust both carbys so that
the butterfly is fully closed(the screw will just contact the stop)
now adjust the length of the right carby linkage rod so that it can be reconnected without moving the carb lever.
Carbs are now syncronised
proceed to tuning.
Jeff
