| [ Total Views: 1263 | Total Replies: 2 | Thread Id: 5639 ] |
|
|
 Robo
Compulsive Aussie Vee Dubber
Posts: 4491
Threads: 120
Registered: February 13th, 2003
Member Is Offline
Location: Tweed Heads
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval madness
|
| posted on April 25th, 2003 at 07:11 PM |
|
|
spray gun attachment to rust proof
Hi Guy's
I want to spray all the inside of the panels of the Kombi with fish oil.
Is there some sort of nozzle that can be attached to a flexable hose 5-8mm, in turn attached to a spray gun, that will give me a 360 degree spray
pattern, this could be fed into the holes in the rockers and body panels ect, giving me an even full length coverage.
Rob....
Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft
 |
|
|
fish
Wolfsburg Wizard
Posts: 584
Threads: 32
Registered: April 3rd, 2003
Member Is Offline
Location: sunshine coast qld
Theme: UltimaBB Pro Blue ( Default )
Mood: just cruisin
|
 posted on April 26th, 2003 at 05:03 AM |
|
|
fairly cheap at supa cheap, fish
Drink and drive your a bloody idiot!!! make it home you'r a legend !!!!
|
|
|
Robo
Compulsive Aussie Vee Dubber
Posts: 4491
Threads: 120
Registered: February 13th, 2003
Member Is Offline
Location: Tweed Heads
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval madness
|
| posted on April 26th, 2003 at 07:24 AM |
|
|
I was thinking along the lines of a long flexable plastic hose, that I could push right into and along the inside of the panels, the nozzle I would
glue into the end, End rust and a few other rustproofing mobs used this set up for the old vehicals they used to treat.
I would be using a mixture of Tectyl and fishoil, so the nozzle would have to be able to handle the viscosity of this stuff and not block up.
I was thinking of that black garden irrigation stuff with the plastic spray nozzles, I would have to make the holes in the fittings larger of
course, but I dont know if it would handle the pressure!
The degreasing gun, may be the go for the easy places, but this still wont reach some of the tighter spots.
Any other idea's, I am all ears!
Rob....
Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft
|
|
|
fish
Wolfsburg Wizard
Posts: 584
Threads: 32
Registered: April 3rd, 2003
Member Is Offline
Location: sunshine coast qld
Theme: UltimaBB Pro Blue ( Default )
Mood: just cruisin
|
| posted on April 26th, 2003 at 07:40 AM |
|
|
try a piece of clear tubing with a couple of hose connectors. soetimes the nozzle will fit quite snog in the hose and no need for the clamp. worked on
ours pretty well. cheers, fish P.S. where are the spots on a Kombi that you need a long hose to get to. or are you talking about another type of
car?
[Edited on 25-4-2003 by fish]
Drink and drive your a bloody idiot!!! make it home you'r a legend !!!!
|
|
|
jonno-t3
A.k.a.: johnathon cooper
Officially Full-On Dubber
Posts: 289
Threads: 53
Registered: April 26th, 2003
Member Is Offline
Location: campbell town, tas
Theme: UltimaBB Pro Blue ( Default )
Mood: stewed
|
| posted on April 26th, 2003 at 01:37 PM |
|
|
hey...when i body deadened my car i used a product called shutz... it is awsome stuff....comes out thick but in a misty kinda spray...uses a special
gun that clips onto a compressor...might be worht checkn it out
jonno
"if only everything in life was made like a volkswagen"
 |
|
|
The_Bronze.
A.k.a.: Bronze
Custom Title Time!
Minister of Volkswagenism
Posts: 1922
Threads: 238
Registered: September 1st, 2002
Member Is Offline
Location: Toronto - Westlakes NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Enlightened.
|
| posted on April 26th, 2003 at 11:17 PM |
|
|
Welcome Jonno.
I'm about to do the same to my Baja - Throw around some body deadener / antirust stuff and some fish oil. I want to get it well up into the pan
and all the nooks and crannies as well. Was thinking of putting an extension onto a spray gun like what you suggested where it's sprayed through
a gargen hose.
[size=4]Bronze.[/size]
Rathmines, Lake Macquarie, NSW.
|
|
|
