| [ Total Views: 1243 | Total Replies: 9 | Thread Id: 56930 ] |
|
|
 type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 30th, 2006 at 09:19 PM |
|
|
how would you fix this dent?
how would you fix this dent? would you unpick the whole panel and weld in another or?
marcel
[ Edited on 30-9-2006 by type82e ]
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
kroozzn63
Bishop of Volkswagenism
Posts: 3005
Threads: 317
Registered: January 31st, 2004
Member Is Offline
Location: sydney
Theme: UltimaBB Pro Yellow
Mood: mmm coffee
|
| posted on September 30th, 2006 at 09:25 PM |
|
|
its hard to say when u cant see it.
show us your gates
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 30th, 2006 at 09:26 PM |
|
|
sorry its there now i had to reduce it first
and I mean the dent behind the drivers door
marcel
|
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on September 30th, 2006 at 10:10 PM |
|
|
A repair would have many many hours required to do the job properly. I would think 40 hours to panel beat it with minimal filler, or the same to
unpick it and weld in another second hand section.
Either of these repair methods require someone with skill, experience and patience.
|
|
|
64vwmark
A.k.a.: Mark Shepherd
Fahrvergnugen
Posts: 930
Threads: 82
Registered: December 6th, 2004
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Black
|
| posted on September 30th, 2006 at 10:35 PM |
|
|
I think you will get a better result if you replace the panel.
Beach Buggy
74 L Beetle
Mk4 Golf |
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 30th, 2006 at 10:54 PM |
|
|
how hard is it to unpick? is it just a matter of drilling all the spotwelds then getting my panelbeater mate to fit the new panel?
marcel
|
|
|
Volksaddict
Wolfsburg Wizard
Posts: 533
Threads: 102
Registered: December 25th, 2004
Member Is Offline
Location: Sawtell Mid North NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: hooked
|
| posted on October 1st, 2006 at 02:15 PM |
|
|
Unmmm.. looks like your into the sill area as well..which would mean shrinking and beating wouldnt work ...anew panel is in order me thinks ...you can
get special drill bits rhat remove spot welds ..around $20 but well worth it ..just remember to use a cutting fluid with it ...bloody hard spotwelds
Cheers&Beers
Ray V
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 1st, 2006 at 06:56 PM |
|
|
can you buy new panels? what sort of money
it looks like a lot of work! I'm debating whether to buy it or not
marcel
|
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on October 1st, 2006 at 09:48 PM |
|
|
It is repairable. Just will take many many hours. Hours = $
There is also a debate when a panel is replaced as to whether it ever seals properly to protect from rust.
At the end of the day it is time.
In my opinion there is a very high chance it will not get repaired propely. Unfortunatley that is what happens in a lot of cases, and it is up to you
to ensure that whoever does the job will do it properly.
If replacing the panel, the old one has to be removed carefully without ripping or making holes in the adjacent panels.
The second hand replacement section has to be free from rust holes and unpicked carefully without ripping or making holes in it.
The original adjacent panels and seams, and the edges and seams of the new panel need to be fully cleaned of any sealer, surface rust or paint. This
then should be zinc primed with weld through primer.
The replacement panel should ideally be resistance spot welded on. MIG welded where any unreachable areas are.
Alignment should be done with as much precision as possible, and the finished job one sealed and painted should be of a standard that equals OEM
(original)
|
|
|
vwjon
Fahrvergnugen
Posts: 914
Threads: 101
Registered: July 16th, 2006
Member Is Offline
Location: perth W.A
Theme: UltimaBB Pro Blue ( Default )
Mood: oily n thirsty
|
| posted on October 26th, 2006 at 10:47 AM |
|
|
why not leave it, the van is almost a rat looker!! used, abused, and loved so hard it hurts!!
3 1959 cadillacs
1 musso
2 early notchbacks
2 split kombis
2 split panels
1 split ute
1 low light panel
1 ex-pmg bay
1 country buggy
1 beetle ute
1 14" syncro caravelle
1 16" syncro doka
1 golf cabrio
1 vw camper trailer
2 3meter bombs
|
|
|
