| [ Total Views: 1774 | Total Replies: 16 | Thread Id: 65260 ] |
|
|
 sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on September 28th, 2007 at 08:52 PM |
|
|
Caster Shims - would they help?
My 71 type3 based kit is very low, and the steering at speed is VERY light and twitchy.
I've been told caster shims may help. Am I on the right track?
Thanks,
Mick.
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
MickH
A.k.a.: Michael Hutchinson
Bishop of Volkswagenism
Hairy Gutted Sloth
Posts: 3389
Threads: 29
Registered: September 6th, 2003
Member Is Offline
Location: TownsvilleTropical North QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: Grow a brain...walls don't hit back...
|
| posted on September 28th, 2007 at 09:09 PM |
|
|
Yep. Hows the beast going???
tssnq.com.au
|
|
|
VWCOOL
23 Windows of Awesome
Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline
Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help
|
| posted on September 28th, 2007 at 10:36 PM |
|
|
The usual Beetle caster shims won't fit... But yes, more caster (ie: +3 or more deg) is good for steering feel and stability
Do you need it 'low'? You might be amazed at what an inch or two in extra ride height can do
[ Edited on 28-9-2007 by VWCOOL ]
Pay your debts, CxxT
|
|
|
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on September 30th, 2007 at 07:55 AM |
|
|
| Quote: | Originally
posted by MickH
Yep. Hows the beast going???
|
Very well, Mick. Interior stripped at the mo' for new carpet, console and dash.
Pics up soon!
:thumb
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on September 30th, 2007 at 08:05 AM |
|
|
| Quote: | Originally
posted by VWCOOL
The usual Beetle caster shims won't fit... But yes, more caster (ie: +3 or more deg) is good for steering feel and stability
Do you need it 'low'? You might be amazed at what an inch or two in extra ride height can do
[ Edited on 28-9-2007 by VWCOOL ]
|
Unfortunately (sort of), I wouldn't want to raise it, as the body is really designed to sit this low (full, legal 125mm under car clearance), that's
why I wanted dropped spindles. The only set available would cost me around $750 landed.
I've seen caster shims for VW for sale, but no-one differentiates the models. I assume the difference between beetle and type3 is significant.
A few have suggested that these shims are only effective if your car is raked (mine's lowered the same front and back).
BJ camber adjusters and 'lowered' BJ's have also been suggested to improve the feel. What do you guys think?
Thanks for the help,
Mick.
[ Edited on 29/9/2007 by sinecure ]
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
VWCOOL
23 Windows of Awesome
Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline
Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help
|
| posted on September 30th, 2007 at 04:42 PM |
|
|
yes its a shame a lot of kit car bodies were designed for lowered chassis where it would have been far more sensible to produce a body with lowered
wheelarches 
One inch raised might be all that is needed to get some caster back without looking 'raised'
Beetle shims fit between teh lower front axle tube and chassis; Type 3s have a full-circle rertainer but you may be able to re-engineer this section
of the chassis to tilt the beam...?
You know Type 3s have some camber/caster adjustment at the top arm...?
Pay your debts, CxxT
|
|
|
Joval
Learner Dubber
Posts: 19
Threads: 1
Registered: August 25th, 2007
Member Is Offline
Location: Ireland
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 1st, 2007 at 06:38 AM |
|
|
Could it be down to bump steer? Inverting the tie-rods at the spindles should restore the angle, but you may need to get bushes made up.
|
|
|
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on October 1st, 2007 at 10:07 AM |
|
|
| Quote: | Originally
posted by VWCOOL
yes its a shame a lot of kit car bodies were designed for lowered chassis where it would have been far more sensible to produce a body with lowered
wheelarches
One inch raised might be all that is needed to get some caster back without looking 'raised'
Beetle shims fit between teh lower front axle tube and chassis; Type 3s have a full-circle rertainer but you may be able to re-engineer this section
of the chassis to tilt the beam...?
You know Type 3s have some camber/caster adjustment at the top arm...?
|
Yes, the design of the Purvis is easier, being based on the swing axle beetle chassis, with lowered floor pans to compensate for the roof height.
Apparently, DRB used the type3 because their kits were so heavy (1300kg for mine, around 800kg for the Eureka).
There is only about three inches between my bumpstop lugs (no bump stop rubbers were present when I got the car) and the landing surface for them.
Factory bump stops only just fit at rest, so I'm making a new, lower set.
Isn't one 'notch' on the suspension around two inches? If I could raise by only an inch, I would be very happy with that. As far as tilting the
beam, would this actully help as the car is not raked at all?
I've looked at the suspension adjustments in the manual and intended on having a fool around with them, I just wanted to make sure that there wasn't
something relatively straightforward (like shims or dropped spindles) I could do to correct the geometry.
Thanks,
Mick.
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on October 1st, 2007 at 10:13 AM |
|
|
| Quote: | Originally
posted by Joval
Could it be down to bump steer? Inverting the tie-rods at the spindles should restore the angle, but you may need to get bushes made up.
|
I suspect bump steer has some degree of influence, but it does wander at speed on a dead flat surface (Mt Cotton driver training facility). Do you
mean inverting the tie-rod ends where they attach to the spindle? Would this have a similar effect to 'lowered' BJ's?
Thanks,
Mick.
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
VWCOOL
23 Windows of Awesome
Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline
Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help
|
| posted on October 1st, 2007 at 10:43 AM |
|
|
Simply turning one notch will change ride height by around four inches but VW provided different numbers of inner and outer notches (splines on the
torsion bar) that allow fine ride height adjustments of around 8mm. Ie: turning the torsion bar back one spline on the inner and forward one on the
spring plate will raise the car by 8mm. Easy in theory BUT can be very frstrating in practice... and it depends on the torsion bar diamter and weight
of the car etc. You may need several attempts to get the ride height you desire. I got one wrong a week ago and it is now 2in higher than I planned!
(But I have expected that as I was installing stiffer torsion bars)
PS: Dropped spindles allow you to lower a car and retain factory caster; they will not restore factory caster on a lowered front end, IYKWIM
| Quote: | Originally
posted by sinecure
| Quote: | Originally
posted by VWCOOL
yes its a shame a lot of kit car bodies were designed for lowered chassis where it would have been far more sensible to produce a body with lowered
wheelarches
One inch raised might be all that is needed to get some caster back without looking 'raised'
Beetle shims fit between teh lower front axle tube and chassis; Type 3s have a full-circle rertainer but you may be able to re-engineer this section
of the chassis to tilt the beam...?
You know Type 3s have some camber/caster adjustment at the top arm...?
|
Yes, the design of the Purvis is easier, being based on the swing axle beetle chassis, with lowered floor pans to compensate for the roof height.
Apparently, DRB used the type3 because their kits were so heavy (1300kg for mine, around 800kg for the Eureka).
There is only about three inches between my bumpstop lugs (no bump stop rubbers were present when I got the car) and the landing surface for them.
Factory bump stops only just fit at rest, so I'm making a new, lower set.
Isn't one 'notch' on the suspension around two inches? If I could raise by only an inch, I would be very happy with that. As far as tilting the
beam, would this actully help as the car is not raked at all?
I've looked at the suspension adjustments in the manual and intended on having a fool around with them, I just wanted to make sure that there wasn't
something relatively straightforward (like shims or dropped spindles) I could do to correct the geometry.
Thanks,
Mick.
|
[ Edited on 1-10-2007 by VWCOOL ]
Pay your debts, CxxT
|
|
|
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on October 1st, 2007 at 05:25 PM |
|
|
PS: Dropped spindles allow you to lower a car and retain factory caster; they will not restore factory caster on a lowered front end, IYKWIM
Yep, my plan was to reset the car to factory front height, fit the drops, then measure and adjust both front and rear again.
I guess I'll spend a few days playing with the splines when I can get some time off, bringing it up 16-24mm.
Thanks for all the advice guys!
Cheers,
Mick.
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
Joval
Learner Dubber
Posts: 19
Threads: 1
Registered: August 25th, 2007
Member Is Offline
Location: Ireland
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 2nd, 2007 at 04:23 AM |
|
|
I've no experience with type3s but certainly on a lowered beetle on standard spindles the increased tie rod angle causes wandering,
which is more noticable at speed as you travel further before correcting (AFAIK) this can be counteracted with caster shims to make the steering a
little heavier,
On beetles you need to drill/ream the spindle to fit an inverted tapered bush to allow the rods to bolt underneath the arm.
This is based on experience but I could be talking shite, I'm sure somebody more technically minded can clear this up :P
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on October 2nd, 2007 at 08:31 PM |
|
|
Joval, all you need to do is rotate the steering box on the beam to bring the tierods back to a respectable angle.:thumb
|
|
|
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on October 3rd, 2007 at 10:17 AM |
|
|
| Quote: | Originally
posted by Craig Torrens
Joval, all you need to do is rotate the steering box on the beam to bring the tierods back to a respectable angle.:thumb
|
Thanks, Craig. This may be a stupid question, but by rotate do you mean invert?
Cheers,
Mick.
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
Joval
Learner Dubber
Posts: 19
Threads: 1
Registered: August 25th, 2007
Member Is Offline
Location: Ireland
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 4th, 2007 at 06:09 AM |
|
|
Hmm, but if you change the angle of the steering box won't you have to fit a joint on the end of the column?
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on October 4th, 2007 at 01:20 PM |
|
|
You need more castor on the front wheels
so the steering wheel returns to straight ahead
after going round a corner etc...
My beetle is lowered and I did have the shims but took them out because the tyres were rubbing on the guard edges...
and now the steering wheel doesn't return to straight ahead, but its not a problem....
Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on October 26th, 2007 at 03:45 PM |
|
|
http://forums.aussieveedubbers.com/viewtopic.php?tid=65772
Would these fit a 71 type3? I've seen very similar advertised as OK for all rear (type3, beetle), but linkpin front only, and as bj front for
type3/beetle. I'd like them for the front, but will buy them anyway for the rear to simplify minor adjustments there after the front end adjust.
What do I measure apart from compressed height, bush diameter and position?
BTW, bought these to replace the front bump stops altogether:
http://cgi.ebay.com.au/Chrysler-Valiant-Upper-bump-stop-M-D-I-tech-S-to-CM_W0...
1.4 inch high by 1 inch wide with 0.9 inch of thread so perfect (I hope!).
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
