| [ Total Views: 1006 | Total Replies: 4 | Thread Id: 67337 ] |
|
|
 dutchy
A.k.a.: Richard Holland
Slammed & Awesome Dubber
Posts: 76
Threads: 19
Registered: October 24th, 2005
Member Is Offline
Location: adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 3rd, 2008 at 08:40 PM |
|
|
Who's the IDA expert ???
Im having problems with revs holding and then dropping
down slowly,do ida"s have an internal spring like dcoe webers,when broken causes this.
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on February 3rd, 2008 at 10:05 PM |
|
|
are you sure you don't have a manifold leak ? Sounds like it maybe sucking air.
|
|
|
HS618
Officially Full-On Dubber
Posts: 277
Threads: 28
Registered: March 9th, 2005
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 3rd, 2008 at 10:20 PM |
|
|
Dutchy,
IDA's are very basic therefore no internal springe except for the accelerator pump springs (one on the cam and one on the pump)
What have you checked so far?
As a suggestion, check the following things
Air leaks in the manifolds etc.,
Linkages to the carbies and their synchronisation with the carbs,(this can be done by removing a linkage at each carb in turn and observing any
movement back to idle by the carb. linkage arm. If no movement, see if the idle drops by pushing each linkage arm towards the idle position
a distributor advance curve that is advancing too quickly, thereby holding a higher than normal advance (and RPM) when returning to idle
Regards
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 4th, 2008 at 05:55 AM |
|
|
have you played with the throttle shafts or butterfly plates may be there binding slightly
|
|
|
dutchy
A.k.a.: Richard Holland
Slammed & Awesome Dubber
Posts: 76
Threads: 19
Registered: October 24th, 2005
Member Is Offline
Location: adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 4th, 2008 at 08:33 PM |
|
|
Thanks guys ive got a bit of checking to do.
|
|
|
