| [ Total Views: 1118 | Total Replies: 3 | Thread Id: 71571 ] |
|
|
 Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on September 6th, 2008 at 06:04 PM |
|
|
How the hell do you align doors
Building my 61 Beetle and want advise on aligning the doors. I cant see how sliding a hinge in or out at the front will alter the back edge of the
door when in the closed position (hope that makes sense). In other words to get a square edge between door and 'B' pillar.
Do you actually have to heat and bend the 1/4 inch plates of the hinge itself.
I understand the door striker sets the height at the rear of the door so the body crease lines up. But is the door meant to lift a 1/4 inch + at the
rear when it sits into the striker. The door drops when you actually open it, is this normal.
I'm stuffed if I can work it out. Any help would be appreciated.
Thanks, Kevin
|
|
|
VWCOOL
23 Windows of Awesome
Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline
Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help
|
| posted on September 6th, 2008 at 06:42 PM |
|
|
Something is bent and will need to be straightened.. The door should have 'even' gaps to the body all around it and teh door should 'swing' nicely
on its hinges; the striker plate shouldn't be doing much 'work'. The hinges do get bent when doors are opened too far - usually when they fly open
around corners; the A pillars flex and bend too
Pay your debts, CxxT
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on September 6th, 2008 at 06:42 PM |
|
|
is there wear in the hinge pins ?
Can you move the door up and down when its open ?
|
|
|
Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on September 6th, 2008 at 06:59 PM |
|
|
Thanks VWCOOL and I have just had 4 oversized pins fitted at Vintage Veedubs.
|
|
|
