| [ Total Views: 534 | Total Replies: 1 | Thread Id: 7213 ] |
|
|
 59 BUS
Seriously Crusin Dubber
Posts: 170
Threads: 27
Registered: March 10th, 2003
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Too Low?
|
 posted on June 6th, 2003 at 08:48 AM |
|
|
Fitting a 2 Ltr Box
I've been after a 2 Ltr box for a while now, to go into my IRS rear end (of my Bus) I currently have a 1600 kombi box.
The question is: Are the mounts the same on both gear boxes? or will I have to cut and weld to get the thing to fit?
Cheers.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Secoh
Fahrvergnugen
Posts: 926
Threads: 97
Registered: September 20th, 2002
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Rarin' to
|
| posted on June 6th, 2003 at 01:44 PM |
|
|
Mounts are all different AFAIK, but it wouldnt be impossible to do.
I have a caravelle 5sp for sale if you are interested!
If it aint broke,
Make it go faster!!  |
|
|
Old Dubber
Wolfsburg Wizard
Posts: 605
Threads: 25
Registered: August 26th, 2002
Member Is Offline
Location: Everton Hills, Brisbane, QLD, Australia 4053
Theme: UltimaBB Pro Blue ( Default )
Mood: great!
|
| posted on June 6th, 2003 at 02:40 PM |
|
|
The front mounts are different, but the 1600 mount will bolt up to the 2ltr, you will need to change the studs over. The 2ltr gearbox has the rear
mounting "ears" on top of the bell housing, you may choose not to use these (although I did). The 2ltr gearbox is also 6mm longer, but
should not be a problem in your setup. How is your gearbox mounted? or do you have a rear cross mount on your engine?
|
|
|
59 BUS
Seriously Crusin Dubber
Posts: 170
Threads: 27
Registered: March 10th, 2003
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Too Low?
|
| posted on June 6th, 2003 at 04:45 PM |
|
|
I have a rear crossmember! does that mean it will not fit?
|
|
|
Menangler
A.k.a.: Dave Becker
Custom Title Time!
Posts: 1991
Threads: 309
Registered: August 26th, 2002
Member Is Offline
Location: South Coast NSW
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 6th, 2003 at 05:42 PM |
|
|
It will fit with out any trouble.
If you are using the 2 ltr box with its original bellhousing it will bolt straight into a '72 and later kombi.
(You will need to run a 2 ltr flywheel on your engine, Can't do that if its a type 1 engine obviously!)
If you are going to change the bell housing to a 1600 one, then you will need to change the front gearbox mount to the 1600 one, with the longer studs
too. and also the input shaft.
Have fun!
FAHRVERGNUGEN;
Description of a pleasurable sensation,
Experienced when a car and it's driver are in mutual harmony, A unique driving experience, Pleasure, Satisfaction,
A feeling experienced by Volkswagen Drivers.
 |
|
|
