| [ Total Views: 1096 | Total Replies: 4 | Thread Id: 72156 ] |
|
|
 butidontunderstand
Insano Dub Head
Posts: 783
Threads: 113
Registered: January 23rd, 2005
Member Is Offline
Location: Brisbane Wooloowin
Theme: UltimaBB Pro Blue ( Default )
Mood: 
|
| posted on October 7th, 2008 at 02:17 PM |
|
|
Type 4 motor
will an 1800 motor fit as a replacement for the 2L motor in the kombi? Can I unbolt the clutch from the 2L and bolt it onto the 1800 and is the
starter motor the same?
|
|
|
mnsKmobi
Wolfsburg Wizard
Posts: 589
Threads: 27
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 8th, 2008 at 11:44 AM |
|
|
| Quote: | Originally
posted by butidontunderstand
will an 1800 motor fit as a replacement for the 2L motor in the kombi?
|
Yes.
| Quote: | Can I unbolt the
clutch from the 2L and bolt it onto the 1800 and is the starter motor the same?
|
The 2l clutch is bigger and I suspect the starter motor is different too.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on October 8th, 2008 at 04:38 PM |
|
|
The 2l flywheel & clutch are bigger,but you should be able to swap flywheels ( don't forget to recheck the crankshaft end float) and clutch,then
reuse your original starter motor
|
|
|
General_Failure
A.k.a.: Tristan
Custom Title Time!
Use your head, don't abuse it!
Posts: 1036
Threads: 107
Registered: June 15th, 2004
Member Is Offline
Location: Peaceful Finley, NSW
Theme: UltimaBB Streamlined2
Mood: Not too bad. Thanks for asking!
|
| posted on November 10th, 2008 at 06:13 PM |
|
|
Can I have your 2L? heh,
Just made me wonder can the flywheel from a 1.8L be fitted on the 2L motor without issue? Besides the possibility of premature clutch wear.
Is the 1.8 (and I guess 1.7) a compatible flywheel with the type2 transmissions? My mechanic did the auto to manual conversion which has a 1600 box
mated to the 1.8 type4 motor. Just trying to figure out exactly what he did in there.
If at first you don't succeed. Build, build again.
Vehicle: 1975 Special order delivery walkthrough panel based LCA pop-top camper. Motor: Nippon 1.8L Single port Wasserboxer, Transmission: 3 rib 002.
|
|
|
xornge666x
Wolfsburg Wizard
Posts: 460
Threads: 15
Registered: September 17th, 2006
Member Is Offline
Location: Providence RI, USA / Melb OZ
Theme: UltimaBB Pro Blue ( Default )
Mood: agnostic
|
| posted on November 14th, 2008 at 09:57 AM |
|
|
1600, 1800 and 2L bell housings are different.
2L starter is different to the 1600 / 1800 which is the same.
1700 flywheel is a different size, and uses a 7mm threaded bolt to bolt up the pressure plate which is impossible to get if you dont have the original
ones.
1700 is 210mm
1800 215mm
2L is 228mm
The bellhousings can be switched onto different trans cases, and the imput shaft needs to be changed too.
The flywheels all bolt up the same.
|
|
|
