| [ Total Views: 2148 | Total Replies: 5 | Thread Id: 73131 ] |
|
|
 ericos_bob
Learner Dubber
Posts: 16
Threads: 4
Registered: November 16th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 26th, 2008 at 05:38 PM |
|
|
big tyres, gearing, lift questions
Hey fellow veeddubbers just came across this site a few weeks back and gotta say the information here is really useful and ever since my year round
trip of australia I've wanted to turn Bob into a baja kombi but have got caught up in my own thoughts on how to go about it and a few problems have
come up so hope someone can pass on their experience.
First off I have planned to do the ej22 engine swap for a little more power and saw the conversion kit on custom vee dub. Anyone know the ground
clearance vs the stock motor with the modified sump?
I thought about jacking up the front and back as much as possible to finally get some much needed clearance and having trouble getting a working
combination unless I minimize my lift.
4 inches by dropping the beam, and lets say 2 inches lift from addding torsion bar adjusters and with the 15 inch rims and 29inch tyres a total of 8
inches or so
With the back I heard I can gain about 4 inches of lift by tensioning the torsion bars but will need to swap to porsche cv joints. I thought I could
put a 33inch tyre on the rear and cut the guards if need be which will give me close to 8 inches lift to even things out but then i would have to
switch to a 1600 transaxle and from what i hear they aren't too strong. Has anyone had issues running big tyres with a 1600 transaxle?
Next my gearing would still be much taller than stock so the extra power of the subaru engine will be spread out . Are there any other options to getting the gearing back to stock?
Other option I looked at was to remount the engine a few inches lower and then add an adaptor to the swingarm to lift it and then go with a 30 inch
tyre to get the gearing spot on but ofcourse I would still have to go with the 1600 transaxle and have my engine hanging in the breeze.
thanks
erik
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on November 26th, 2008 at 05:50 PM |
|
|
Welcome
The CVD ( http://www.customveedub.com.au ) Conversion kit or at least an EJ 22
with their sump fitted will be about 20mm lower than the type 4 motor. If you run one of their Baja Beams you can get up to about 6" of lift. With
cut rear guards and 33's you will even this out with spinning the torsion bars with stock CV's.
If you go visit them or send them an email Andrew has a lifted kombi with 33" rear tyres on and an EJ 33, awesome bit of gear. Check it out on
youtube under EJ 33 or Baja Kombi
With 33's and an EJ 22 I woul dgo with a 1600 Kombi Box, gearing will be fine. 2L ill be to tall for the EJ 22. Strength is up to the driver. Drive
hard they will break.
|
|
|
rocknrob
A.k.a.: Rob
Insano Dub Head
Posts: 844
Threads: 90
Registered: December 18th, 2003
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Black
Mood: mystic
|
| posted on November 27th, 2008 at 11:38 AM |
|
|
Hi Erik i have the EJ22 running a 2litre box and have 245/70/16 tyres for bush driving. these work out at about 29.5 inches and are enormous compared
to standard kombi tyres. the EJ22 pushes this kombo great on the highway and second gear is fantastic for rough road bush track hillclimbing sort of
stuff...i really don't think i need anything better for what i have planned hope this is some help
|
|
|
ericos_bob
Learner Dubber
Posts: 16
Threads: 4
Registered: November 16th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 30th, 2008 at 01:49 PM |
|
|
Thanks for the replys guys I think I will just run 29s front and rear because I don't want to have to carry around two different sets of spare tyres.
Will just have the front beam modded and tension the rear torsion bars and if I need more lift after that I'll just start a new project later on.
I'm now searching for an ej25 for the conversion. I know that custom veedub likes to use the 22s and so do a lot of people on this site so just
wondering why? The ej25 has a broader torque curve and the sohc around 25 extra ponies. unfortunately they're an interferance engine and have head
gasket issues before 1999 but the newer 22s are also interferance. Is the reason that the 25's are more difficult to fit? I understand the wiring
loom isn't as easy to modify. Have seen 00 and newer 25s for around the same price as 22s on ebay and other sites
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on November 30th, 2008 at 02:37 PM |
|
|
| Quote: | Originally
posted by ericos_bob
Thanks for the replys guys I think I will just run 29s front and rear because I don't want to have to carry around two different sets of spare tyres.
Will just have the front beam modded and tension the rear torsion bars and if I need more lift after that I'll just start a new project later on.
I'm now searching for an ej25 for the conversion. I know that custom veedub likes to use the 22s and so do a lot of people on this site so just
wondering why? The ej25 has a broader torque curve and the sohc around 25 extra ponies. unfortunately they're an interferance engine and have head
gasket issues before 1999 but the newer 22s are also interferance. Is the reason that the 25's are more difficult to fit? I understand the wiring
loom isn't as easy to modify. Have seen 00 and newer 25s for around the same price as 22s on ebay and other sites
|
The EJ 22 is a bullet proof engine which is very simpleto work on. They had a good power curve and have proven themselves to be awesome. The EJ 22 in
my Buggy has over 500 000 km on it and still going strong.
There are no new EJ 22's they are now EJ 20 SC.
The EJ 25 is also an option but it is larger than the 22, weighs more and on the dyno it about 10 RWHP more, although the EJ 22 had bigger wheels so I
doubt there was even that much in it.
The newer engine is the more technology it has and the less knowledge there is on them. CVD ( http://www.customveedub.com.au ) loved the EJ 22 because it works well, and they have plenty of experience with working on
them, fault finding and repairs.
If I could I would have an EJ 22 in the Iguana in a flash, but I need newer than 99 to meet the ADR's and that ruled the EJ 22 out as an option.
The EJ series with a CVD sump will only sit about 15mm lower than the type 4 engine.. yep nice and high.
|
|
|
rocknrob
A.k.a.: Rob
Insano Dub Head
Posts: 844
Threads: 90
Registered: December 18th, 2003
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Black
Mood: mystic
|
| posted on November 30th, 2008 at 04:49 PM |
|
|
I know the sump is an issue if you are going low but if you are putting big tyres on and raising suspension not so much problem...mine still has
standard suspension at this stage.....
[img] [/img]
|
|
|
