| [ Total Views: 1385 | Total Replies: 2 | Thread Id: 8247 ] |
|
|
 koolkarmakombi
Veteran Volks Folk
enkarmarising
Posts: 2078
Threads: 158
Registered: June 16th, 2003
Member Is Offline
Location: viva brisvegas
Theme: UltimaBB Pro Blue ( Default )
Mood: do you see the bats?
|
| posted on July 8th, 2003 at 01:13 PM |
|
|
removing silicon and spraying
I have cut my windscreen out of my kombi. It was glued in with various attempts to waterproof a completely stuffed rubber. Ive scrapped most of it
off but want to know what will dissolve it so I can phosphoric acid the trace of rust Ive wirewheeled back, fill, then paint the screen frame.
I want the paint to stick, and the silicon will prevent that. I will probably have to use it on the body too as the current paint job has been
polished with all sorts of shit over its sad excuse for a life!
My plan is to do the screen frame, put the screen back in then fix the other few bits and bobs in the body then spray the whole bus under my house. I
cannot afford the few weeks it will take with no bus. The waterleaks in the screen needed to be done first so out it came.
Any other tips welcomed inc screenmounting tips
thanks:bounce:bounce |
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on July 8th, 2003 at 01:19 PM |
|
|
Try some Prepsol or Wax n Grease remover
|
|
|
5PL1TDCS10N
Insano Dub Head
Posts: 845
Threads: 129
Registered: January 13th, 2003
Member Is Offline
Location: Perth, W.A
Theme: UltimaBB Pro Blue ( Default )
Mood: Oblivious
|
| posted on July 10th, 2003 at 11:58 AM |
|
|
Automotive Paint thinners might work too. get a second opinion from an Auto paint shop. They should know...
|
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on July 10th, 2003 at 08:38 PM |
|
|
If there has been actual silicon used, not mastic which dissolves, then you may have to resort to mechanical means of removeal. This would mean that
you would have to get the wire wheel to take the silicon sealer off as well.
If there is any mastic sealer then you will be able toremove that with prepsol or thinners. 
|
|
|
baybuscamperkid
Compulsive Aussie Vee Dubber
prince of insufficient light, ruler of heck
Posts: 4316
Threads: 335
Registered: August 25th, 2002
Member Is Offline
Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: transported
|
| posted on July 13th, 2003 at 06:26 PM |
|
|
i had to use a metal scraper on mine to get the silicone off
Reimagined/Recycled/Upcycled Cool
|
|
|
