| [ Total Views: 3690 | Total Replies: 22 | Thread Id: 83161 ] |
|
|
 mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 17th, 2010 at 12:11 PM |
|
|
1970 Kombi...
Hi Guy's, just brought back my latest project and in my eyes is great although alot of work, i'm looking forward to the fun ahead.
My Question is does anyone know anything of it's history?? would love to know where it came from. The Guy i bought it off only bought it for the
engine for his buggy and know's nothing about it! (This was in Gympie)
At some point someone has loved the little darling and changed the colour from it's original Light Blue (possibly Space Blue??) to some sort of
metalic blue with a mix of orange and purple here and there!
Cheers Mike
Should end up something like my last one!
|
|
|
komuter
Slammed & Awesome Dubber
Posts: 99
Threads: 10
Registered: August 27th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 17th, 2010 at 12:32 PM |
|
|
love those early lowlights,,the last bus looks to be a beauty,good luck with the new project
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 17th, 2010 at 01:05 PM |
|
|
Cheers, it was. However started out very similar to the new one! but with a lete front clip installed. Love the Early Bay look and drawn to the ones
needing the most Love!!
|
|
|
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 17th, 2010 at 08:54 PM |
|
|
Without any previous owner papers, it's impossible to say much about the car's history! Looks like it was one of the earliest Aussie-built campers -
the roof looks like a Sopru shape to me.
Notice on the compliance plate that it was built by 'Motor Producers Limited'. This was the VW Germany-owned company that ran the Clayton assembly
plant in Melbourne after Volkswagen Australasia Ltd was dissolved in 1968. Motor Producers contracted work out, so Datsun cars and Volvo trucks got
built in the former VWA plant alongside VWs. The whole shebang was sold to Nissan in 1976.
|
|
|
jjwebb123
A.k.a.: Jason
Wolfsburg Wizard
Posts: 617
Threads: 63
Registered: August 15th, 2009
Member Is Offline
Location: Nrth QLD
Theme: UltimaBB Pro Blue
Mood: Trying to get it puring
|
| posted on April 17th, 2010 at 09:57 PM |
|
|
RAT RAT RAT
Good Luck Champ should be good.
"A car for the people, an affordable Volkswagen, would bring great joy to the masses and the problems of building such a car must be faced with
courage."
Adolf Hitler At opening of 1934 Berlin Auto Show
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 2nd, 2012 at 05:58 PM |
|
|
Just thought I'd bring this back to life: started my Resto 3 months ago now, did find more info about Earl as he is now named
Since I've had him he has sat in my mates garden till now, I have just spoken to John the dad and blue Kombi owner to try and get a history,
interesting, he had it for 1 year and got it from a wreckers which he knows someone there (littles in Gympie) before that it sat in a guys front
garden for over ten years south side of Gympie somewhere. John took the twin port 1600 out for his beetle or Manx
Any help finding info would be great, I know there's not much to go on..
I'll post up some pics later.
Mike
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 3rd, 2012 at 04:55 PM |
|
|
How it looks today, also did some practice welding whilst I was in there:
Jobs done:
Rear corners
Dodgy vent cut outs
Battery tray
Removed inner, middle and outer drivers side sill and floor section
New jacking point rear drivers side
Nearly finished cutting and welding external power point
Some other little bits
Today
|
|
|
Scottkombi
Officially Full-On Dubber
Posts: 358
Threads: 11
Registered: December 24th, 2008
Member Is Offline
Location: Terrigal NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Sick of Work
|
| posted on July 3rd, 2012 at 06:07 PM |
|
|
Looks great Mike.
Keep pluggin away - coming together nicely.
88 Caravelle Syncro Camper
89 Caravelle GL microbus - 5 speed
69 Microbus
05 Mk5 Golf 1.9 TDi DSG
|
|
|
polarbus93
Seriously Crusin Dubber
just cruisin slowly
Posts: 197
Threads: 21
Registered: April 1st, 2008
Member Is Offline
Location: western sydney for now
Theme: UltimaBB Pro Blue ( Default )
Mood: fat and happy mostly
|
| posted on July 3rd, 2012 at 10:24 PM |
|
|
nice project have to love early bays
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 3rd, 2012 at 11:23 PM |
|
|
Thanks she's a big project but I do love the look of the early bay's
A little snap shot of the work I've done so far:
going to jump through my millions of pictures but this is what ive done so far...
first time welding on the van at this point, i have welded some parts of front door all with gassless wire which was ok at this point, i changed to
gass halfway through and you can probably tell at which point that was but i can't believe how much better it is welding with gass!!
found some surface rust behind which i have cut out completely and re welded in a new piece then covered
removed inner, middle and outer sill drivers side.
new battery tray in
had to square up the added vent holes and weld in new metal
small section behind drivers wheel arch
Stripped the paint from the outside and painted with rust convertor, really suprised on how good the panles are above the bottom 8"
remove power socket hole
cut out some rusty bits
this was this weekends work
Sorry for the dumping of images but belive me i have missed out on 10X as many..
Cheers
MIke
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 6th, 2012 at 10:49 PM |
|
|
Cut out rear drivers jacking point and part of the top hat:
Welded the new jack point in, didn't look right and after test fitting the inner sill I was amazed on how much of an angle the sill support piece is
on, what's the go with crap reproduction parts! Looks like I'll drill out the spot welds and weld back on once sill is in.. Is the normal for these
parts? Got the other 3 to do.
Cut some more rust out, cut more than just the bubbles to make sure sound in behind.
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 6th, 2012 at 10:51 PM |
|
|
after wirebrushing and sanding I painted rust bullet, then made a repair section to cover up, blew a couple of holes but otherwise very very happy.
Really dissapointed with the lack of time spent this week, maybe better next week
Mike
|
|
|
binner
Fahrvergnugen
Posts: 981
Threads: 210
Registered: January 19th, 2010
Member Is Offline
Location: Brisbane
Theme: UltimaBB Streamlined2
Mood: want more grunt
|
| posted on July 9th, 2012 at 09:59 PM |
|
|
^^^ solid effort mate, I hear ya with the time factor, you look at a small bit of work and think ....yeah an hr and it will be all sorted...3 hrs
later its finished....
keep on trucking!!
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 12th, 2012 at 10:41 PM |
|
|
Ye spent an hour yesterday and only I know where that time went to look at it nobody else will.
Been watching your thread binner and it helps motivation. Where are you located? Look forward to seeing it at some point.
Mike
|
|
|
rossdanialnaumov
Officially Full-On Dubber
Posts: 230
Threads: 59
Registered: January 26th, 2011
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue
Mood: Happy
|
| posted on July 13th, 2012 at 06:51 PM |
|
|
Looking good mate. Keep up the good work.
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 13th, 2012 at 10:01 PM |
|
|
Cheers, you wouldn't happen to have the dimensions of the beam you made for yours, spoke to you on the phone a while back.
Going to give it a go I think but not sure of the pipe size etc to get.
Anyway small update:
Ground up ready to repair the bubble section now and tidy light cutout.
Also started on the silly number of drilled holes on the side, also a number of them on the drivers side, might count them tomorrow
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 13th, 2012 at 10:03 PM |
|
|
Also fixed this piece up, shaped by hand both a piece to repair the inner structure as its also curved,
very happy with it so far,
What rust???
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 13th, 2012 at 10:18 AM |
|
|
Done a bit of work since i posted on here last:
Made a c pillar to replace rottin one and couldn't find one anywhere, very complicated piece to make!!
Extended inner sill to match original
Cut out front outrigger and jacking point, welded in replacment
Replaced front top hat section
Welded in short sill
Plug welded long sill and started welding between the tacks at the top of the long outer sill
c pillar bottom:
End of middle sill:
Starting to put outer sill in place:
Here you can see an old repair which went the length of the panel
I also seam sealed the back of the corners I welded, sorry for picture quality flash on the phone!!
Not to mention sanded and painted rust bullet on sills before putting the outer on and chassis on drivers side:
|
|
|
Bigbertha
Casual Dubber
Posts: 34
Threads: 3
Registered: May 14th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 18th, 2012 at 12:02 AM |
|
|
Nice work there. Save the Lowies.
Love the bus in your avatar. I'm interested about the missing bits.
Is it a LHD?
How do you get by with no front indicators?
Love the colours. Mine is going to look very similar.
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on October 18th, 2012 at 12:16 AM |
|
|
great work
you are killing it
before you know it you'll be driving it about 
love the updates
thanks
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 18th, 2012 at 07:03 PM |
|
|
| Quote: | Originally
posted by Bigbertha
Nice work there. Save the Lowies.
Love the bus in your avatar. I'm interested about the missing bits.
Is it a LHD?
How do you get by with no front indicators?
Love the colours. Mine is going to look very similar.
|
Cheers, the bus in the avatar was left hand drive and I put small indicators into the front bumper.
I painted it lotus white.
What missing bits do you want to know about?
Mike
|
|
|
mikew
Seriously Crusin Dubber
Posts: 176
Threads: 32
Registered: August 10th, 2008
Member Is Offline
Location: Sunshine coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 18th, 2012 at 07:13 PM |
|
|
| Quote: | Originally
posted by h
great work
you are killing it
before you know it you'll be driving it about
love the updates
thanks
|
Thanks, be a few years I think before driving around!!
Anyway little updated I started welding the outer sill back in:
Firstly cut out the rusty section, tacked in the outer sill, painted the reinforcement as this won't be accessible again, cut a repair section for it
plug welded the bottom in and started fully welding them in, this is a couple of days work may I add:
|
|
|
Bigbertha
Casual Dubber
Posts: 34
Threads: 3
Registered: May 14th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 18th, 2012 at 09:33 PM |
|
|
| Quote: | Originally
posted by mikew
| Quote: | Originally
posted by Bigbertha
Nice work there. Save the Lowies.
Love the bus in your avatar. I'm interested about the missing bits.
Is it a LHD?
How do you get by with no front indicators?
Love the colours. Mine is going to look very similar.
|
Cheers, the bus in the avatar was left hand drive and I put small indicators into the front bumper.
I painted it lotus white.
What missing bits do you want to know about?
Mike
|
The front indicators. Cool,
|
|
|
