| [ Total Views: 2220 | Total Replies: 18 | Thread Id: 83598 ] |
|
|
 lukel
Learner Dubber
Posts: 2
Threads: 2
Registered: May 12th, 2010
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 12th, 2010 at 09:05 AM |
|
|
how would you do your resto again?
Just bought a VW 1974 Bug from ebay, don't know anything about mechanics, never even changed the oil in my car before, so this is going to be fun.
However I can MIG and TIG weld, very good with my hands. Any advice guys?
If you could do your restoration over again, what would you do differently and what advice would you have for someone in my position? The only
advice from a work mate of mine who has done this before is drink allot of scotch. Can anyone build on that? |
|
|
alien8
Wolfsburg Wizard
Posts: 521
Threads: 84
Registered: September 5th, 2008
Member Is Offline
Location: Brisbane
Theme: UltimaBB Powder
|
| posted on May 12th, 2010 at 10:16 AM |
|
|
A good tip is to get the best replacement parts money can buy or in a year you will be replacing them again. No joke.
Go through every system on the car. It sucks having to pull off parts time and time again to reach parts you did not replace the first time round.
Form a plan and stick to it or the car will never get back on the road if you keep changing your mind.
Read a lot of manuals. Read them like a novel. Put a few in the dunny. Ask question, does not matter how stupid as it probably has been asked
before.
Have fun and good luck!
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on May 12th, 2010 at 10:19 AM |
|
|
the first thing you need to do is work out what you want out of the car and some sorta budget
do u want 1st class restoration down to every detail
do u want to modify slightly
do u want to mod fully
where are you located will be a factor as well fill in yr details
depending on that will depend on what you do first order
|
|
|
vwsteve
A.k.a.: steve
Veteran Volks Folk
karmann crazy
Posts: 2087
Threads: 200
Registered: July 25th, 2006
Member Is Offline
Location: Redcliffe QLD
Theme: UltimaBB Pro Navy
Mood: Busy!
|
| posted on May 12th, 2010 at 01:13 PM |
|
|
.
if you plan on keeping it then do it right the first time, sometimes you are better off buying a 10000.00 finished car that someone has spent 20000.00
on than you spending that sort of money but if you can do it yourself then its a lot cheaper
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on June 19th, 2010 at 09:32 PM |
|
|
| Quote: | Originally
posted by alien8
A good tip is to get the best replacement parts money can buy or in a year you will be replacing them again. No joke.
Go through every system on the car. It sucks having to pull off parts time and time again to reach parts you did not replace the first time round.
Form a plan and stick to it or the car will never get back on the road if you keep changing your mind.
Read a lot of manuals. Read them like a novel. Put a few in the dunny. Ask question, does not matter how stupid as it probably has been asked
before.
Have fun and good luck!
|
+1 on the manuals
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
STIDUB
Custom Title Time!
Over it.
Posts: 1497
Threads: 57
Registered: June 23rd, 2008
Member Is Offline
Location: Where else but QLD :)
Theme: UltimaBB Pro Blue
Mood: Worn out, for no benefit.
|
| posted on June 19th, 2010 at 10:43 PM |
|
|
agreed with the buy one already done, usually only something you understand when you make the mistake of adding up how much u have spent, find
something thats close to what you want change a few MINOR things, then enjoy, unless you like playing of course, then just dont tell the woman how
much it costs 
if you like germanlook, find the 3k L bug on ebay from last week, its a perfect looking start, pending rust though that wouldnt be an issue for you it
seems. 
Volkswagen Drivers Club of Queensland - member 
STIDUB - yep its still a work in progress
Vwdcq club car racing/ and crashing while my bug isn't finished.
The above are personal views, no more, no less |
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on June 20th, 2010 at 07:55 AM |
|
|
Each time that I've restored a car, I think of all the things that could have been done 'better'. Just remember - the person that has never made a
mistake, probably has never done anything! Some people's idea of restoring a car is to take it out of the shed, and re-store it in another shed Do the job that YOU are happy with, and have fun.
Cheers, Greg
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
DieSchnelleKafer
Officially Full-On Dubber
Posts: 296
Threads: 22
Registered: July 7th, 2010
Member Is Offline
Location: Bunbury, western australia
Theme: UltimaBB Pro Brown
Mood: hungry for metal
|
| posted on July 8th, 2010 at 03:02 PM |
|
|
try not to let yourself keep to many of the old parts and clog up your working space especially with a fatty, you will find yourself constantly moving
parts around... i havnt restored a car yet but we are getting dragged back by clutter
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on July 8th, 2010 at 03:13 PM |
|
|
| Quote: | Originally
posted by lukel
Just bought a VW 1974 Bug from ebay, don't know anything about mechanics, never even changed the oil in my car before, so this is going to be fun.
However I can MIG and TIG weld, very good with my hands. Any advice guys?
If you could do your restoration over again, what would you do differently and what advice would you have for someone in my position? The only
advice from a work mate of mine who has done this before is drink allot of scotch. Can anyone build on that?
|
I would never do a complete strip down and restoration again...
much too big a job...
I'd buy one restored or nearly restored.. and do whats left or what I want different...
I replaced virtually everything on My beetle so it drives like it did in 1968...
I now think I went too far as I replaced all the tie rod ends ball joints etc.. which weren't worn at all...??
but at least I know nothing is going to let me down...
and if something goes wrong, I can usually fix it...
I was also lucky that I bought My parts when I started resto in 1997....
LEE
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Flintstones
Custom Title Time!
Posts: 1077
Threads: 69
Registered: August 27th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Psyche Blue
|
| posted on July 8th, 2010 at 10:38 PM |
|
|
depends on how much you can do yourself and also how much time you really do have to dedicate to the project.
Be realistic with yourself as well as your pocket..........
Decide what you want to get out of your project from the outset as this will help give you direction, resto, callook, custom, germanlook etc.
do the maths on paper, as this will help you budget each part of the project.
Plan the process on how you are going to tackle each part of the project
Get ready for some injuries and have fun transforming it from just a
car to your pride and joy!!
Cheers
D
|
|
|
DubCty
Slammed & Awesome Dubber
Posts: 95
Threads: 11
Registered: June 11th, 2009
Member Is Offline
Location: Launceston, Tas
Theme: UltimaBB Pro Blue ( Default )
Mood: MAD™
|
| posted on July 11th, 2010 at 07:16 PM |
|
|
Never let the restoration stop. Chip away at it piece by piece. Break the work down in to little blocks so that that you see results along the way. I
hope you like grease dust lol.
Straight Cuts – The Best Preparation For A Wife!
|
|
|
waveman1500
Custom Title Time!
Also rides a Honda
Posts: 1346
Threads: 13
Registered: December 17th, 2009
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 11th, 2010 at 09:50 PM |
|
|
If you're going to do a full-on nuts and bolts restoration, make sure that you start with your dream car. The cost of a full restoration on an oval
window beetle will be nearly the same as the cost of restoring a later model, but the finished value of the oval window will be more. However, the
finished price will almost always be much less than your restoration costs, unless you're doing an exotic supercar.
If you don't want a full restoration (I don't recommend it) then just find out what's wrong with the car, if anything, and get it back on the road.
Once you've been driving it for a little while, you'll notice any areas that you might want to improve, like worn suspension or whatever, so then
you can fix that. This becomes a never-ending process, but it's fun!
|
|
|
Lucky Phil
Wolfsburg Wizard
Posts: 480
Threads: 16
Registered: August 1st, 2010
Member Is Offline
Location: Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm a legend in my own lunchtime!
|
| posted on January 26th, 2011 at 02:37 PM |
|
|
I agree with your tip, waveman1500, on avoiding the full restoration. Too many people sink too much cash into cars that maybe they shouldn't.
My '74 Lbug spends about the same time off the road as on it and I enjoy working on it as much as I do driving it. It's easy to lose interest in a
project when all you do is spend,spend & fiddle.
I am currently sourcing a Karmann Ghia for a full rebuild and the effort of the resto is about the same as if I were to resto the Lbug.
In the end the KG is a nicer car and will have a better resale value.
It is far easier to start a project than it is to finish it.
The quickest and easiest way to finish a good car is to start with a good car.
|
|
|
dogo
A.k.a.: Noddy Goodboy
Seriously Crusin Dubber
Posts: 128
Threads: 13
Registered: October 3rd, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: on another Planet..
|
| posted on January 26th, 2011 at 05:31 PM |
|
|
The best advise I can offer is find yourself the best shell, as that is the foundation on which to build. Every thing else bolts on/off.
Secondly, if you intend to use it and put miles on it then it's an good investment. If you spend all your hard earned cash on it and it sits in the
garage because you don't want to scratch it, poor investment! Then again it's not all about money, but doing something you enjoy!
The better the car you start with, the easier,cheaper, faster and more likely you are to finish it!
The world is full of unfinished projects...
Cheers Dave
Ps I just realised that lukel has only 2 posts that both are over 6 months old. I think he might have bought a Holden?
|
|
|
twoguns
Compulsive Aussie Vee Dubber
simply aircooled
Posts: 4275
Threads: 226
Registered: November 7th, 2002
Member Is Offline
Location: city, sydney.
Theme: UltimaBB Psyche Grey
Mood: simply cruizin'
|
| posted on January 26th, 2011 at 05:37 PM |
|
|
well i would never take my bus to indian again... i know that!  other
than that i would do more myself, and certainly use the knowledge of mike from CBB. mike is the man for vw.
my best was the beach buggy. between me and the saint it was a great learn and fun.
Simply Cruzin'...
|
|
|
Lucky Phil
Wolfsburg Wizard
Posts: 480
Threads: 16
Registered: August 1st, 2010
Member Is Offline
Location: Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm a legend in my own lunchtime!
|
| posted on February 3rd, 2011 at 08:12 PM |
|
|
If you have little or no experience the best way to start is by sourcing another car really cheap and wrecking it.
One of the best ways of finding out how something is put together is by pulling it apart.
You will end up with a pile of usable bits and lots of learning. If you stuff something up it won't matter.
And if you cannot successfully completely dissassemble a car then you don't stand much chance of completing a resto.
After all, you're not really a veedubber until you have spent a couple of hours trawling your stuff in the shed muttering "I know Iv'e got one of
these somewhere!
|
|
|
waveman1500
Custom Title Time!
Also rides a Honda
Posts: 1346
Threads: 13
Registered: December 17th, 2009
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 3rd, 2011 at 10:23 PM |
|
|
Lucky Phil, I think Dogo has got the right idea here. The original poster who asked the question hasn't logged in to this forum in over 8 months! I
don't think he's listening. All the advice is definitely valid though.
I bought my current bug as an unfinished project, with the rust all welded up and the shell already painted very nicely. I started with a car with no
engine, brakes or interior but the build was relatively easy because I had a donor car. I don't think that I would ever want to start from an
incomplete car again. In future I'm planning to buy nice cars, rather than rough projects, as it just isn't worth the money invested to bring a
tired car up to scratch. As it is my car drives really nicely, but the interior trim all needs complete replacement. I'm kind of reluctant to spend
any more money on it, simply because I feel that I've reached the point of diminishing returns. I've gotten the car to a drivable state for about
$2000, but to get it to how I really want would be another $1200+ in the engine bay and maybe $500 in the interior. But then once those aspects were
finished then I'd become unhappy with the scratched windows, then the bumpers would start to look shabby, and the suspension could do with
replacing... it never stops! If you aim to get the car to some particular level of finish, then it gives you something to aim at, and I think I'm
just as happy with a usable street car which is slightly scruffy around the edges as I would be with a perfect restoration.
|
|
|
Lucky Phil
Wolfsburg Wizard
Posts: 480
Threads: 16
Registered: August 1st, 2010
Member Is Offline
Location: Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm a legend in my own lunchtime!
|
| posted on February 4th, 2011 at 09:40 PM |
|
|
Right on waveman. Still a good topic for a thread, though.
The best way to finish a good car is to start with a good car!
Resurrecting basket cases is for tragic's with deep pockets and lots of skills.
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on February 5th, 2011 at 07:54 AM |
|
|
You're dead right, except it's starting to get to the point where you can't be fussy.
Sadly people are cashing in these days especially when it comes to Kombis.
Look at the utter shit heaps that most people would have sent to the wreckers in years gone by that is fetching $4k on ebay
Alot of people cant afford to pay top dollar for a solid car then restore it as well.
|
|
|
