| [ Total Views: 1082 | Total Replies: 4 | Thread Id: 84667 ] |
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 6th, 2010 at 10:12 PM |
|
|
Dellorto CB Update kit
Any one used these kits??
There appears to be 2 parts to the story
Changing the venturi and spray bar set up
and plugging the idle air hole and replacing the idle jet holder with an extended holder with a hole in the top.
On 40's you up the 140 main to 150's and the 180 airs to 170's
Guessing idles stay the same
I guess my concern is - if i change over and for some reason it becomes a pig to jet and i go back - I am stuck with the blocked idle air inlet
Is this what causes the increased air flow?? or is it the increased venturi size??
Can you go back?? but still have the extended idle jet??
My car seems to be jetted perfectly at the moment and i dont want to ruin the jetting
barry
Futue te ipsum!!!
|
|
|
 waltermitty
Custom Title Time!
Legend when my beer goggles are on
Posts: 1993
Threads: 268
Registered: August 29th, 2002
Member Is Offline
Location: Port Macquarie now Yipee!
Theme: UltimaBB Pro Grey
Mood: Hungry for mor
|
| posted on July 6th, 2010 at 10:43 PM |
|
|
| Quote: | Originally
posted by Bizarre
My car seems to be jetted perfectly at the moment and i dont want to ruin the jetting
barry
|
Bazzy!
If its perfect now whats the possible gain?
More power? Better fuel?
Mitchell
23 windows ...8 too many!
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on July 7th, 2010 at 07:39 AM |
|
|
try Dassdubber.......he set them up in the rag
|
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 14th, 2011 at 03:15 PM |
|
|
Well - finally put the update kit in
Did both changes - blocking the idle air inlet and the venturi upgrade
MUCH more top end in it
Pulls stronger
If I cared I would say it has added a couple of ponies
Still have the same idles but seems to run a bit richer
Had to restet the mixtures from 3 - 3.5 turns down to 2 turns
I have 65's in there at the moment - might try going back to 60's but would need to be at about 4 - 4.5 turns
Whatever - there is a difference.
Happy I have gone there 
Futue te ipsum!!!
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on January 14th, 2011 at 09:28 PM |
|
|
yeah the update kits worked well on my 44idf's as well
|
|
|
