| [ Total Views: 621 | Total Replies: 6 | Thread Id: 88063 ] |
|
|
 beachbuggy61
Seriously Crusin Dubber
Posts: 162
Threads: 43
Registered: December 22nd, 2009
Member Is Offline
Location: Toukley, Central Coast NSW
Theme: UltimaBB Pro Orange
Mood: Hangin' to drive my bug!
|
 posted on January 9th, 2011 at 09:07 PM |
|
|
Changing to an alternator
Hi All,
I'm still running a generator (two wires off the top to a voltage regulator under the back seat) and a lot of the pics of motors I see on here and
all I seem to see on the web have alternators, so maybe it's time I caught up. 
Is this a difficult conversion? I'm pretty good with most things mechanical.autoelectrical, but is this something that a good auto electrician should
do or is it something I could convert myself?
Thoughts?
Cheers, Marc.
Baja
1915cc's of raw power 
Turbocharger
Intercooler
EFI
Crank fired Ignition
Runs E85
Engineered
"The Lord does not subtract from the life of a man, the hours spent on his Volkswagen" Anon. |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on January 9th, 2011 at 09:13 PM |
|
|
| Quote: | Originally
posted by beachbuggy61
Hi All,
I'm still running a generator (two wires off the top to a voltage regulator under the back seat) and a lot of the pics of motors I see on here and
all I seem to see on the web have alternators, so maybe it's time I caught up.
Is this a difficult conversion? I'm pretty good with most things mechanical.autoelectrical, but is this something that a good auto electrician should
do or is it something I could convert myself?
Thoughts?
Cheers, Marc.
|
You can do it yourself Marc
You don't need the voltage regulator any longer...
get a two wire alternator with the built in regulator...
the small wire goes to the push on terminal to activate the Generator/alternator lamp in the dash..
the large wire goes from the alternator to the battery...
then to the dash....
the two large wires on the voltage regulator are bolted together or soldered together and insulated...
alternators use a different vee belt... 11.3mm x 912mm
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
kieranweston
Commited Dubber
Posts: 62
Threads: 18
Registered: September 27th, 2010
Member Is Offline
Theme: UltimaBB Pro Blue
|
| posted on January 10th, 2011 at 09:03 AM |
|
|
| Quote: | Originally
posted by beachbuggy61
Hi All,
I'm still running a generator (two wires off the top to a voltage regulator under the back seat) and a lot of the pics of motors I see on here and
all I seem to see on the web have alternators, so maybe it's time I caught up.
Is this a difficult conversion? I'm pretty good with most things mechanical.autoelectrical, but is this something that a good auto electrician should
do or is it something I could convert myself?
Thoughts?
Cheers, Marc.
|
Hi mate I did it just recently on my 1963 bug, pretty easy job, get an alternator conversion kit which will have what you need in it. Things to
consider that I didnt realise would be you may need a new fuel pump (and possibly a new fuel pump push rod, different size for generator and
alternator) you might want to get a new alternator stand, though an usually get away with the old generator stand, thats about it really, just talk to
your local parts shop. Also with the alternator dont go any higher than a 55watt otherwise you might burn out your wiring loom, VW wiring is pretty
durable but you would need further upgrading if you went for a 90watt output. Any questions PM me.
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on January 10th, 2011 at 09:12 AM |
|
|
A good Alternator kit will come with the stand.
No alternator fits a gen stand, they are a different shape, works the other way though.
Standard wiring is adequate if you wanna upgrade though, 75amp kits brings them inline with what more modern cars have to handle bigger stereos,
higher wattage lights etc
|
|
|
Smiley
A.k.a.: Daniel Stephens
Veteran Volks Folk
Posts: 2125
Threads: 110
Registered: October 29th, 2008
Member Is Offline
Location: Yeppoon, Central Queensland
Theme: UltimaBB Pro Blue
Mood: Synchro'd
|
| posted on January 10th, 2011 at 09:57 AM |
|
|
Depending on what carby you are running you might have to grind a little out of the alternator housing to clear the linkage. I had to do this on my
Baja when I upgraded from a PICT 28 to a PICT 31 carby.
Just another thing to look at.
Smiley 
If you said I was a Volkswagen man, you'd be right.
|
|
|
beachbuggy61
Seriously Crusin Dubber
Posts: 162
Threads: 43
Registered: December 22nd, 2009
Member Is Offline
Location: Toukley, Central Coast NSW
Theme: UltimaBB Pro Orange
Mood: Hangin' to drive my bug!
|
| posted on January 10th, 2011 at 11:54 AM |
|
|
Thanks Keiran. Running a Holley blue pump with rising rate regulator currently so the pump won't be an issue.
Thanks Joel, 75amp would be what I wanted so that when I hit the dipper switch the high beam and spotlights are actually bright!! No need to worry
about the stereo, I have the sweet sound of a boxer engine to keep me company!
Carbies won't be an issue either Smiley but I will keep the linkage in mind. Have 2 Kadrons and the linkage goes under the genny pretty close so
thanks for that.
Now down to Boris to get a conversion kit I guess!
Thanks for all the input.
Marc.
Baja
1915cc's of raw power
Turbocharger
Intercooler
EFI
Crank fired Ignition
Runs E85
Engineered
"The Lord does not subtract from the life of a man, the hours spent on his Volkswagen" Anon. |
|
|
Smiley
A.k.a.: Daniel Stephens
Veteran Volks Folk
Posts: 2125
Threads: 110
Registered: October 29th, 2008
Member Is Offline
Location: Yeppoon, Central Queensland
Theme: UltimaBB Pro Blue
Mood: Synchro'd
|
| posted on January 10th, 2011 at 01:30 PM |
|
|
| Quote: | Originally
posted by beachbuggy61
Thanks Keiran. Running a Holley blue pump with rising rate regulator currently so the pump won't be an issue.
Thanks Joel, 75amp would be what I wanted so that when I hit the dipper switch the high beam and spotlights are actually bright!! No need to worry
about the stereo, I have the sweet sound of a boxer engine to keep me company!
Carbies won't be an issue either Smiley but I will keep the linkage in mind. Have 2 Kadrons and the linkage goes under the genny pretty close so
thanks for that.
Now down to Boris to get a conversion kit I guess!
Thanks for all the input.
Marc.
|
You shouldn't have any clearance issues with twin cabs.
It's only a problem for those of us slumming it with a single 
Smiley
If you said I was a Volkswagen man, you'd be right.
|
|
|
