| [ Total Views: 1876 | Total Replies: 22 | Thread Id: 89962 ] |
|
|
 68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on April 20th, 2011 at 06:25 PM |
|
|
Remote Oil Cooler under rear mudguard ...
Well,
after trying out 4 different oil coolers including the doghouse cooler both in the engine bay and outside the engine bay..
I fitted a larger oil cooler under the rear RHS mudguard .. and drove around Town for a few weeks ... I then hooked up a temperature gauge to the
sender in the type 3 dipstick hole.
YIKES....
75C around town... 60 KMH highest speed.. maybe too cold??
Yesterday I drove down the highway 30klms with the gauge going UP to around 118-120C at 80-90 KMH...
so, it seems that at speed , the air isn't going thru the oil cooler...
so I need to lower it down into the air flow or fit a good fan to it
I haven't done either as yet...
behind My oil cooler is the ATF [automatic transmission tank] so
it may be this that is stopping the air flow....
the Best part was when I returned from the 30 + 30 KMH trip
inside the engine bay was COOL....
and I have closed My engine lid for the winter....
I didn't do the oil dipstick test.... lol
but placed My hand on the alternator and fan shroud.... COOL
so, that is excellent.....
People keep telling Me I should have stayed with the doghouse oil cooler... and maybe I would have... had I seen how cheap the New doghouse oil
coolers are now...
But We do what we do... 
LEE
Even I don't know why i do what I do...
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Thinker
Seriously Crusin Dubber
Posts: 162
Threads: 26
Registered: October 13th, 2008
Member Is Offline
Location: Narellan
Theme: UltimaBB Streamlined2
Mood: Contemplating
|
| posted on April 20th, 2011 at 07:42 PM |
|
|
Aren't you worried that somthing could flick off the road and punch a hole in the cooler.
And is that a fuel pump block off plate with the temp sender, if so do get oil temp or air temp reading.
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on April 20th, 2011 at 10:12 PM |
|
|
So what exactly are you running now Lee? That looks like a 6 pass cooler, but is it 1/2" (some are only 3/8 and designed for auto trans and not full
flow and is it plumbed to the old cooler take off, if so, what did you do with blocking the og cooler location. Engine doesn't sound too hot by what
you said, touching alt etc, is the sender and gauge matched, ie 120* or 150* for both???
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on April 20th, 2011 at 11:27 PM |
|
|
Hi Lee
They are not the most effective oil coolers. There is no better place for a cooler than at the front of the car IMHO.
Thinker, the plate Lee showed in his photo is the Type 3 oil filler blank off.
Steve
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on April 21st, 2011 at 01:42 AM |
|
|
| Quote: | Originally
posted by matberry
So what exactly are you running now Lee?
That looks like a 6 pass cooler, but is it 1/2" (some are only 3/8 and designed for auto trans and not full flow and is it plumbed to the old cooler
take off,
if so, what did you do with blocking the og cooler location. Engine doesn't sound too hot by what you said, touching alt etc, is the sender and gauge
matched, ie 120* or 150* for both???
|
Yes Mat,
I can never usually touch many parts in the engine bay even with the top of the engine lid open etc..
so, it didn't feel that the engine was HOT...
the VDO sender is part number 320 002 so I don't know if they are matched or not???
I do remember now it did have something stamped on it... lol
I'll have to check it out...
that would be great if I didn't really have a problem...
I'm using one of those adaptors that sit where the oil cooler went.. so, no oil goes thru it until the oil pressure relief valve works.. so, that
is good [in My opinion] as its sort of acting like a thermostat.. driving around Scone at night the cooler doesn't get hot at all. as its 11-18C
at nght now..
and it wasn't that hot the other day either... I had the heater on coming back
You can usually smell an engine if its really HOT.. and it didn't seem hot...???
the oil cooler is an 8 pass and it is 1/2 inch ....
I also have a transmission cooler but its 3/8 and its made entirely different to this oil cooler.. I tried it, [with no sender],
but it didn't seem to work too good..
this one has fine fins like an air conditioner condensor..
The H0 series 1500 engines were all type 3 type engines..
and all had that dipstick plate on them.. The plate is stamped with the maker... and its about 10mm thick... why its so thick I don't know.... I
saw yesterday where you can buy new plates at a VW shop in the Netherlands.. maybe the salt eats them??
cheers
LEE
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on April 21st, 2011 at 08:06 AM |
|
|
I'll need to check that part #, your gauge, what is the biggest number on the face, 120 or 150?
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on April 21st, 2011 at 10:12 AM |
|
|
| Quote: | Originally
posted by 68AutoBug
The H0 series 1500 engines were all type 3 type engines..
and all had that dipstick plate on them
|
Just so there is no confusion, the 1500 H beetle engines, never had the plate, neither did the 1500 O splitty engines, the only ones that did were
type 3 M and T engines.
The only reason yours has it is because its a T type3 engine that someone has just stamped your old H number on so they didnt have to do an adjustment
of records with the RTA, its an old trick
T001xxxx makes it a mid 66 type3 engine.
Like Matt said there are 2 different VDO senders.
It would pay to check the calibration of your gauge and sender in boiling water, make sure it sits on 100c.
The biggest problem you have is no fan on the cooler.
The only time you can really get away with no fan is if you still have the stock oil cooler as well, or you mount it somewhere in an area of high air
flow like under front bumper.
How come you didn't stay with the stock dog house setup?
they are very well engineered and can support modified engines over 2L so a 1600 single port should be no worries
The only time I have ever found a stock doghouse inadequate was on my turbo engine but thats only due to the heat load of the turbo oil return.
My 1776 which runs a 8.8compression ratio with twin carbs, cam etc even in summer in the low-mid 40s never got over 105c oil temp with stock cooler,
with decklid standoffs I could get it back below 95c.
Oil temp is related more to revs than engine load.
Head temp will responded to engine load but no to much revs, high revs with not much load (rolling down hill example) drops head temps right back.
Oil grade plays a big part too,
I ran my 1776 on 10/30w as it was a fresh build
it ran much hotter on 20/50 which is because the thicker the oil the more the pressure relief valves open and bypass the oil cooler trying to get the
oil hotter and thinner
Thicker oil takes more to cool off too.
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on April 21st, 2011 at 04:50 PM |
|
|
My gauge is 150C Mat
and it is a 6 pass oil cooler made in the USA ..
I can't read whats printed on the sender....
will have to get someone with better eyes...
I tried with a torch and magnifying glass...
LEE
PS: hoping its the sender then... lol
PS: I've had the same problem with the oil preswure senders..
tried 3 senders and the gauge is always FULL Scale... Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on April 21st, 2011 at 08:51 PM |
|
|
Leebroh!
don't risque itz man, fit the origyie doggy stylz wonz ihn playce hhomie!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on April 21st, 2011 at 08:57 PM |
|
|
I can talk gangsta too..... yo
|
|
|
bluebug74
Seriously Crusin Dubber
Posts: 113
Threads: 51
Registered: January 2nd, 2009
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 22nd, 2011 at 04:27 PM |
|
|
Hi Lee,
I've also fitted an oil cooler & it's got a fan attached to it. Once the temp rises to 90, the fan kicks in automatically so i don't have any
issues with engine warm ups.
I would suggest that you use a different clamping method for those cooler hoses. The pressure is high & will kick out the hoses. Try the a/c
clamping method. And try to also fabricate a block off plate to ensure no stones hit into the cooler.
Another fav location is near the gearbox using steel braided hoses. But the distance is farther than the one behind the fender.
Good luck!!
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on April 22nd, 2011 at 04:33 PM |
|
|
| Quote: | Originally
posted by matberry
I'll need to check that part #, your gauge, what is the biggest number on the face, 120 or 150?
|
[size=4]Hi Mat
well, I have found two 120 C temperature gauges in My drawers.. so, I will put one of those in...
and I dod believe My engine will NOT over heat.. I also found the sheet of aluminium mesh , so I'll put some over the front of the oil cooler so
damage can occur..
Chris,
I would have stuck by the doghouse oil cooler if i could have seen a new one for sale... but have only just seen them for sale...[/size]
in the meantime.. I have a few different oil coolers and electric fans in My shed... lol
Best part is,, inside My engine bay is nice and cool....
and fingers crossed My oil temp will be just fine..
not exceeding 100C
LEE
[/size]
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on April 22nd, 2011 at 04:36 PM |
|
|
ah i c 
One to keep ya truckin for the moment, applause for the innovation though mate
Hey Joel that old fella got crabs or sumfin :P?
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on April 22nd, 2011 at 06:06 PM |
|
|
Well there's your problem Lee. Presently you have sender 320 002 which is a 120* water temp sender, but you have a 150* oil temp gauge, so the
reading won't be correct. I usually recomend fitting a water temp gauge anyway, as the red on the scale often only starts at 110* and that is ok for
oil temp in an air cooled vee dub, but much hotter and you want to beware of causing engine damage. Where as the std oil temp gauge is designed for a
water cooled engine that can get away with higher oil temp if the water temp is kept unger control, so they have red starting around 125-130* which is
HOT for our engines.
So, fit a water temp VDO gauge with 120* full scale and that will match your sender.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Smiley
A.k.a.: Daniel Stephens
Veteran Volks Folk
Posts: 2125
Threads: 110
Registered: October 29th, 2008
Member Is Offline
Location: Yeppoon, Central Queensland
Theme: UltimaBB Pro Blue
Mood: Synchro'd
|
| posted on April 22nd, 2011 at 06:36 PM |
|
|
Problem with running a cooler like that is that there is nothing cooling your engine while sitting at the lights etc.
Unless of course you have a fan fitted.
If I were you Lee I'd just go back to the doghouse, especially with a stock engine. Adding coolers and hoses and fittings everywhere is just
introducing more parts to fail or leak into a system that works fantastically in standard form.
Smiley 
If you said I was a Volkswagen man, you'd be right.
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on April 22nd, 2011 at 06:38 PM |
|
|
| Quote: | Originally
posted by Smiley
Problem with running a cooler like that is that there is nothing cooling your engine while sitting at the lights etc.
Unless of course you have a fan fitted.
If I were you Lee I'd just go back to the doghouse, especially with a stock engine. Adding coolers and hoses and fittings everywhere is just
introducing more parts to fail or leak into a system that works fantastically in standard form.
Smiley
|
x 2
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on April 22nd, 2011 at 08:08 PM |
|
|
I have two VW's producing close to 140hp atw, both registered street cars, both driven often on the road.........both running standard doghouse
coolers !
Do yourself a favour, put it back to OEM 
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on April 23rd, 2011 at 12:16 AM |
|
|
| Quote: | Originally
posted by Smiley
Problem with running a cooler like that is that there is nothing cooling your engine while sitting at the lights etc.Smiley
|
Hi
I have a front mounted cooler on my sons bug, it never gets hot at traffic lights, there is no load on the motor at idle so why would it.
I have fan and thermo switch that turns on it on at 180 F, its never comes on at lights etc.
Steve
|
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on May 2nd, 2011 at 12:09 PM |
|
|
I think it because the engine and gear box have so much bloody paint over them the heat cant get out. 
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on May 2nd, 2011 at 04:53 PM |
|
|
| Quote: | Originally
posted by ian.mezz
I think it because the engine and gear box have so much bloody paint over them the heat cant get out.
|
its heatproof paint Ian...
Sorry I missed yesterdays Pit stop...
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on May 2nd, 2011 at 08:45 PM |
|
|
| Quote: | Sorry I missed
yesterdays Pit stop...
|
I wondered where you were - I thought you didn't like us any more. lol
From your ole' mate Jeff
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on May 2nd, 2011 at 11:52 PM |
|
|
Yes Jeff
was hoping to go... but I fitted a Pertronix kit in My SVDA distributor on Saturday afternoon and couldn't get it to advance far enough...??
so, was up early on Sunday morning but couldn't fix the problem..
and wasn't game enough to drive on the highway like it was...
I still haven't driven My beetle...
but what I did do today, I ground a couple of mms off the bottom of My rotor, so I could lift the magnetic ring up a bit in case it was touching the
bottom plate etc in the distributor..
But, I still haven't started the engine or tested the advance...
maybe I'm afraid I haven't fixed the problem???
but I will take it for a run tomorrow...
I want to drive to Newcastle on the weekend..
sorry I missed another good day...
I thought I was going to miss seeing You with shoes/boots on...
but I see in the pics... Bare feet...
LEE
PS: how long does it take You to go from Port to Newcastle?
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on May 3rd, 2011 at 12:57 AM |
|
|
Hey Lee. When I go from my mates place at Beresfield to Port Macquarie, it takes me about 2 1/2 hrs, which now seems so quick.
When I was working in Orange, it took about 7 3/4 hrs.
Now I am working in Parkes, it takes about 8 3/4 hrs.
Glad I am having so much fun driving my bug
I hope you get your timing sorted before the Nats. I hope to see you there.
From your ole' mate Jeff
|
|
|
