Posts: 19
Threads: 3
Registered: January 9th, 2011
Member Is Offline
Location: ballarat victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: woooossaaaa
posted on April 25th, 2011 at 11:07 PM
front beam help needed
hi,
can anybody out there tell me if there is specific measurments for the steering dampner bracket as i'm changing my 2" narrowed front beam to rhd.
i measured the beam that was lhd and there is a fair bit of difference compaired to the the original beam.i .e steering box location & dampener
bracket
i assume if i put the steering box back where the original beam was located this will be fine but was just unsure about steering damp bracket..
any help muchly appreciated
or if any fellow buggers have fitted a 2" narrowed beam and can measure where there's are that would be gr8
regards,
scott
High Stepin Pick Up
66 deluxe project
72 convertable
bf xr8 supercharged & intercooled
posted on April 25th, 2011 at 11:07 PM
