Board Logo
Home Home  Frequently Asked Questions FAQ  View Topic Activity Topic Activity  Forum Stats Stats  Contact Us Contact Us  Banners Banners
Last active: Never Not logged in [ Log In - Register ]
Aussieveedubbers Navigation Symbol Type 3 and Karmann Ghias Navigation Symbol Wheel offset help Go To Bottom

Printable Version  
[ Total Views: 738 | Total Replies: 2 | Thread Id: 90105 ]
« View Previous Thread View Next Thread »
Author: Subject:  Wheel offset help
Memberazzatron
Seriously Crusin Dubber
**

Avatar


Posts: 152
Threads: 21
Registered: February 11th, 2011
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )

posted on April 28th, 2011 at 01:53 PM
Wheel offset help

I'm looking at some new wheels for my '65 notch in the not too distant future.
Have my eye on some and am trying to figure out if they'll fit inside the wheel arch or not.

Is the standard wheel size 15x4.5 with an offset of 46mm?

The new ones I'm looking at are 15x5 inch with an offset of 20mm.

From my basic understanding, it'll stick out towards the fender about an inch? The distance to the suspension will be increased though?

Would this be too much to fit inside the arches with 165's out back and 145's up front?

Cheers



[size=3]__my '65 1500snotch project__[/size]
Super ModeratorBizarre
Super Moderator
The artist formerly known as blue74l
*******

Rank Avatar
Avatar


Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline

Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )

posted on April 28th, 2011 at 04:06 PM



use this to help calculate the changes

http://www.1010tires.com/WheelOffsetCalculator.asp 



Futue te ipsum!!!
Memberazzatron
Seriously Crusin Dubber
**

Avatar


Posts: 152
Threads: 21
Registered: February 11th, 2011
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )

posted on April 28th, 2011 at 04:22 PM



Cheers.
I like this like better though : http://www.rimsntires.com/specs.jsp 
Hopefully it helps someone else out also.

I've figured out the spacing/size difference ~26mm. Just wondering if anyone has had first hand experience with fitting a similar size/offset wheel in the past. Bloody offset! why can't everything come in 40mm+ :D



[size=3]__my '65 1500snotch project__[/size]


 Aussieveedubbers Navigation Symbol Type 3 and Karmann Ghias Navigation Symbol Wheel offset help   Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 14.8% - SQL: 85.2% ]