| [ Total Views: 1840 | Total Replies: 42 | Thread Id: 90318 ] |
| Pages: 1 2 |
|
|
 Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on July 23rd, 2011 at 09:18 PM |
|
|
I run 140mains, 175 airs if that helps ?
Maybe yours is running rich in the top end ?
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 23rd, 2011 at 09:44 PM |
|
|
is it a leaning out effect im getting....
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on July 23rd, 2011 at 09:48 PM |
|
|
over rich can make the car feel bad in the top end as well.
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 23rd, 2011 at 09:55 PM |
|
|
cheers craig....
ill update in a week or so,just moverd house ....
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on July 23rd, 2011 at 09:56 PM |
|
|
moving is a PITA !
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on July 24th, 2011 at 09:18 AM |
|
|
Chris, just a thought..........did you 'bed' the cam and followers in PROPERLY? Have you checked valve timing?
The mains seem a bit big, as Craig says, but that would only drop the power a bit.
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 24th, 2011 at 10:11 AM |
|
|
greg, the cam got bed in years ago and we did it properly...i got a pm of fa dude on ultimate aircooled and he thinks my spring pressures are too
low......they are currently 125 pounds on the seat and 275 pounds at 534' lift "full lift"..he suggested trying to shim them up.....i have plenty
of room to bind....
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 24th, 2011 at 10:13 AM |
|
|
Those spring pressures are definately too low.
What was the cam and rpm your using?
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 24th, 2011 at 10:36 AM |
|
|
engle fk8,i run up too 6500- 7000rpm........these are the new springs i instaled so the ones just taken out even had less......and this problem had
only occured after i instaled the 1.4 rockers......
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 5th, 2011 at 11:27 PM |
|
|
ok here is the update...........still cant find this farkin problem.....i just took my maganaspark dizzy to some dudes to run it up and see if there
was something wrong.the only thing they could find was the air gap was too large,30 thou, so they re-gaped it to 5 thou......took it for a spin,poop
4500rpm it starts pooping on me again......it must be the springs......
a mate said disconect all wires to the coil coming from any gauge.as he thinks i might be having some sort of short or something?????
im over it,off to by a horse & cart......
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 6th, 2011 at 07:17 PM |
|
|
holy, we have a brake through.....i knocked the plug gap down too 28 thou from 40 thou "thanks stan"....but now happening at 6100 up.......so i
think im chasing a ignition problem....
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 10th, 2011 at 10:29 PM |
|
|
mystery solved.....stan pobjoy helped me hit the nail on the head....thanks stan....
..it was the leads or coil.....i installed a msd blaster 2 coil and magnaspark leads......i have not checked which one was the problem as i was too
happy that it reved cleanly past 6500rpm so i parked it in the garage then had a beeerrr.......
hope this helps others...
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on August 10th, 2011 at 10:33 PM |
|
|
Well done ..... happy days
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
| Pages: 1 2 |
