Posts: 61
Threads: 24
Registered: April 22nd, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on May 15th, 2011 at 09:49 PM
Stock Front Beam Width
Was wondering if anyone could help me out with measurements of the stock from Front Beam with Ball-Joints.
Just not 100% certain mine is a stock width because it looks like someone has installed Sway-A-Way type height adjusters into the top and bottom Front
Beam...............so they might have also shortened it up a touch!
I took a measurement (See below)
And was wondering if this is the stock width???
(This is not mine, just used for illustrative purposes.)
I came across information that said the stock Front Beam is 34 3/16" - Which works out to be pretty much 75mm wider than mine, but not sure if this
is correct.
Anyone know what the stock width of the Ball-Joint Front Beam is?
Don't want to order the wrong Sway-Bar :-)!
Johnnie B
Learner Dubber
Posts: 13
Threads: 1
Registered: March 26th, 2011
Member Is Offline
Location: Agassiz, BC, Canada
Theme: UltimaBB Pro Blue ( Default )
posted on May 19th, 2011 at 02:14 PM
A stock ball joint beam, measured along the lower tube between the towers is 31 1/4 inches. Which works out to be about 794mm
