| [ Total Views: 1022 | Total Replies: 4 | Thread Id: 91777 ] |
|
|
 cam070
Custom Title Time!
Posts: 1332
Threads: 53
Registered: July 25th, 2009
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Getting hands dirty stripping the bug down
|
| posted on July 25th, 2011 at 09:22 PM |
|
|
Prep'ing fuel tank for paint - any advice
I'm about to strip the paint from my fuel tank so I can re paint it. Anyone got any advice on ensuring I have all the fuel vapor out before I hit it
with the wire wheel?
So far I have fully filled it with water twice, making sure that the fill hole is the highest part and taking advantage of the fact petrol floats on
water. Then washed it with soapy water 3 times. It's now drying.
Anything else I should do?
|
|
|
DieSchnelleKafer
Officially Full-On Dubber
Posts: 296
Threads: 22
Registered: July 7th, 2010
Member Is Offline
Location: Bunbury, western australia
Theme: UltimaBB Pro Brown
Mood: hungry for metal
|
| posted on July 26th, 2011 at 07:59 PM |
|
|
i just ran some water based degreaser through it and kept some suds in there
|
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on July 26th, 2011 at 08:31 PM |
|
|
Fuel vapour has an upper and a lower flash point. If it smells like fuel vapour, then it can burn. If it just smells sorta a little bit like old fuel,
but no vapour, then it is safe. You know, like when you get petrol on your hands and rub it off. Your hands smell like fuel for ages, but there is no
vapour. Your hands dont burn.
|
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on July 26th, 2011 at 08:46 PM |
|
|
it shouild be out by now
I usually light the oxxy torch up and flash it over the tank filler neck they dont go BOOM your OK
I am just re doing my Oval tank i grit blasted it back to bare metal and have started the paint process
|
|
|
cam070
Custom Title Time!
Posts: 1332
Threads: 53
Registered: July 25th, 2009
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Getting hands dirty stripping the bug down
|
| posted on July 26th, 2011 at 10:30 PM |
|
|
Thanks for the feedback guys!
|
|
|
