| [ Total Views: 994 | Total Replies: 8 | Thread Id: 91976 ] |
|
|
 Kanarienvogel
Casual Dubber
Posts: 20
Threads: 6
Registered: July 18th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 4th, 2011 at 10:55 PM |
|
|
100PCD 6.5x15
I can get my hands on a set of wheels that I think will go really well with my car. Question is, will I be able to convert to 4x 100PCD and still
upgrade to front vented discs and rear solids without having to search everywhere for suitable parts? (which I'm sure will be around)
I know it's a bit ass-about as most people find the wheels to suit the hubs.
So my question is, have people converted Type 3 to 4x 100PCD before?
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on August 4th, 2011 at 11:00 PM |
|
|
Hi
John Sherman in Brisbane will drill the hubs and discs for You
ring Him and ask if anyone has done it before...
I really think that 100 pcd could be too small for a VW...
100MM = 4 INCHES...
that is a very small PCD ...
Lee
PS: JOHN SHERMAN advertisers in VWMA MAGAZINE.. LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
cam070
Custom Title Time!
Posts: 1332
Threads: 53
Registered: July 25th, 2009
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Getting hands dirty stripping the bug down
|
| posted on August 5th, 2011 at 09:44 AM |
|
|
I think Joel runs 4x100 on his Super.
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on August 5th, 2011 at 10:12 AM |
|
|
| Quote: | Originally
posted by Kanarienvogel
So my question is, have people converted Type 3 to 4x 100PCD before?
|
Easy as.
As Cam said I've had mine like that for about 6 years now.
It's 4 wheel discs, rears are made from type3 rotors and my new front discs I gotta swap on are type3 as well, they're pretty much identical to
Beetle.
4x100 and 4x98 are the only patterns that are safe to convert stock brakes to.
They both fit inside the 4x130 pattern so pick up the 4 strengthening ribs.
4x114.3 is too big to do this and would need blanks.
2 ways you can go, tap in the 12mm threads which means you can always fit VW rims back on at any time (spare tyre for example) or have them spot faced
and get studs pressed in and just find a 4x100 space saver spare tyre which is what I did.
|
|
|
Kanarienvogel
Casual Dubber
Posts: 20
Threads: 6
Registered: July 18th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 6th, 2011 at 05:49 PM |
|
|
| Quote: | Easy as.
As Cam said I've had mine like that for about 6 years now.
It's 4 wheel discs, rears are made from type3 rotors and my new front discs I gotta swap on are type3 as well, they're pretty much identical to
Beetle.
4x100 and 4x98 are the only patterns that are safe to convert stock brakes to.
They both fit inside the 4x130 pattern so pick up the 4 strengthening ribs.
4x114.3 is too big to do this and would need blanks.
2 ways you can go, tap in the 12mm threads which means you can always fit VW rims back on at any time (spare tyre for example) or have them spot faced
and get studs pressed in and just find a 4x100 space saver spare tyre which is what I did.
|
Awesome, thanx Joel. Now I only need to check the clearance on the inside as the rims have an off-set of 38mm.
Did you change the master cylinder Joel, or can you run stock with your rear discs?
This is good news, as I can have a fairly cheap conversion to all-round discs and still use stock parts
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on August 6th, 2011 at 06:55 PM |
|
|
that is great news Joel..
I thought You would need new discs and drums....
Excellent news...
there was a fellow on here years ago who crashed His Beetle and his brake drum [i think?] broke off...
it didn't cause the crash.... the drums had been redrilled in the thin parts of the drum.... very thin....
insurance company wouldn't pay because of the redrilled drums....
cheers
Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on August 7th, 2011 at 10:43 AM |
|
|
| Quote: | Originally
posted by Kanarienvogel
Awesome, thanx Joel. Now I only need to check the clearance on the inside as the rims have an off-set of 38mm.
Did you change the master cylinder Joel, or can you run stock with your rear discs?
This is good news, as I can have a fairly cheap conversion to all-round discs and still use stock parts
|
et38 6.5s should be a nice fit if you ran something like a 195/60 tyre.
I had some 15x6.5s on mine that were et35 and a snug fit but type3s run a tiny bit more pos offset than a bug.
I'm just running a stock m/c with volksconversions rear kit, it's a well balanced setup with stock front discs.
Lee, it's when people tap 5 stud into stock brakes it's very dodgy.
Theres only 4 strengthening webs in the hub as you know so with 5 studs it misses most of them.
One of my other bugs had Porsche wheels on retapped type3 brakes.
3 and half of the of the 5 bolt holes only had about 3-4 threads each being tapped into the thin part.
Very dodgy.
|
|
|
Kanarienvogel
Casual Dubber
Posts: 20
Threads: 6
Registered: July 18th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 7th, 2011 at 10:55 AM |
|
|
| Quote: | Originally
posted by 68AutoBug
that is great news Joel..
I thought You would need new discs and drums....
Excellent news...
there was a fellow on here years ago who crashed His Beetle and his brake drum [i think?] broke off...
it didn't cause the crash.... the drums had been redrilled in the thin parts of the drum.... very thin....
insurance company wouldn't pay because of the redrilled drums....
cheers
Lee
|
Thanx Lee,
I intend on screwing in short stud (flush with the face) in the old holes with superstrong locktite to provide support for the material around it. And
the new holes will stay in the ribs.
| Quote: | Originally
posted by Joel
| Quote: | Originally
posted by Kanarienvogel
Awesome, thanx Joel. Now I only need to check the clearance on the inside as the rims have an off-set of 38mm.
et38 6.5s should be a nice fit if you ran something like a 195/60 tyre.
I had some 15x6.5s on mine that were et35 and a snug fit but type3s run a tiny bit more pos offset than a bug.
I'm just running a stock m/c with volksconversions rear kit, it's a well balanced setup with stock front discs.
Lee, it's when people tap 5 stud into stock brakes it's very dodgy.
Theres only 4 strengthening webs in the hub as you know so with 5 studs it misses most of them.
One of my other bugs had Porsche wheels on retapped type3 brakes.
3 and half of the of the 5 bolt holes only had about 3-4 threads each being tapped into the thin part.
Very dodgy.
|
Thanx Joel, I'm exited now! Already took a hub off last night in the dark to check. Will get some new discs for the final setup.
|
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on August 7th, 2011 at 10:58 AM |
|
|
Yes
excellent news...
lots of 100 PCD wheels about....
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
