| [ Total Views: 724 | Total Replies: 8 | Thread Id: 92023 ] |
|
|
 Peter Leonard
Super Moderator
Volatile
Posts: 1456
Threads: 52
Registered: April 18th, 2003
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Blue ( Default )
Mood: shiny
|
| posted on August 7th, 2011 at 10:36 PM |
|
|
Rear shocks?
After removing rear traing arms, bearings, brakes, bushes and spring plates (patAAANNG) I was playing around with paint and cleaing things up, as
it's pretty disgusting down there.
I made the mistake of checking the rear shocks by compressing them.
They're dead. I have all these cool new bushings and bearings and parts and I'm assembling and everything's going well and then... dead shocks.
Who recommends what? Been looking at Bilsteins and Konis and some generic coil-overs but frankly I have no idea what I should be putting in. It's a
'76 IRS which is a daily driver that gets punted around a bit with some feeling: full-on sport hardness is not necessary, but it is definitely not a
cruiser.' the 'search' function has given me ideas, but no closure.
KW's look awesome 
let sleeping dubs lie
|
|
|
 hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on August 7th, 2011 at 10:48 PM |
|
|
http://www.eshocks.com/bil_veh.asp?Model_Index=77Q11&Manf=All&SubChar=Q
|
|
|
waveman1500
Custom Title Time!
Also rides a Honda
Posts: 1346
Threads: 13
Registered: December 17th, 2009
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 7th, 2011 at 10:53 PM |
|
|
I've been happy with my set of Monroe GT Gas for the last few years. They were cheap and you can get them off the shelf at most local car parts
stores.
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on August 7th, 2011 at 10:58 PM |
|
|
x2 for Bilstien's
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
Peter Leonard
Super Moderator
Volatile
Posts: 1456
Threads: 52
Registered: April 18th, 2003
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Blue ( Default )
Mood: shiny
|
| posted on August 7th, 2011 at 11:47 PM |
|
|
I've looked at Bilsteins from e-shocks before (go the search function!) worth getting 'matched' all round? heavy duty looks about right. Monroe has
the plus of being an off-the shelf item, but I've heard ppl say they're too hard for dubs.
let sleeping dubs lie
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on August 8th, 2011 at 12:14 AM |
|
|
| Quote: | Originally
posted by Peter Leonard
After removing rear traing arms, bearings, brakes, bushes and spring plates (patAAANNG) I was playing around with paint and cleaing things up, as
it's pretty disgusting down there.
I made the mistake of checking the rear shocks by compressing them.
They're dead. I have all these cool new bushings and bearings and parts and I'm assembling and everything's going well and then... dead shocks.
Who recommends what? Been looking at Bilsteins and Konis and some generic coil-overs but frankly I have no idea what I should be putting in. It's a
'76 IRS which is a daily driver that gets punted around a bit with some feeling: full-on sport hardness is not necessary, but it is definitely not a
cruiser.' the 'search' function has given me ideas, but no closure.
KW's look awesome
|
Koni & Bilstein shockers are in the TOP class and very expensive IMHO....
I usually use Heavy Duty oil shocks for the rear...
Cofap?? or Monroe shocks...
there is always KYB gas shocks too... ??
I have always thought gas were too hard for the front but I have a set of front monroe gas shocks and they are nice and soft...
cheers
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on August 8th, 2011 at 08:42 AM |
|
|
KYB can be got in oil only but do gas too. Oil will give a softer ride and gas will be stiffer if KYB or Monroe.
Bilstein and Koni do the adjustable gas so you can tune the stiffness
BUT the other big thing to remember is if your ride is lowered or not as a standard length shock won't work as well on a lowered vehicle. This can
cause either a stiffer or sloppier ride or even bottom the shock out!!!!!
madness is in the eye of the beholder  |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on August 8th, 2011 at 10:35 AM |
|
|
also if Your car IS lowered a lot, You may need shorter shocks..
I have shorter shocks on the front of My 68 beetle although its only lowered about 2 inches now..
when it was lower I had to go shorter...
the shocks can bottom out on a lowered car... REAR
so it needs to be able to hit the rubber bump stop
before the shock bottoms out.
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Peter Leonard
Super Moderator
Volatile
Posts: 1456
Threads: 52
Registered: April 18th, 2003
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Blue ( Default )
Mood: shiny
|
| posted on August 11th, 2011 at 01:14 PM |
|
|
so for adjustable Bilsteins or Konis for the rear, does anyone have a part number? the ones I see do not appear to be adjustable. mind you I'm not
looking very closely 
let sleeping dubs lie
|
|
|
