| [ Total Views: 1142 | Total Replies: 13 | Thread Id: 92237 ] |
|
|
 HoneyAbba
Commited Dubber
Posts: 66
Threads: 1
Registered: August 4th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 20th, 2011 at 04:28 AM |
|
|
Early Type 3 Fastback,Type 1 engine conversion
Hello Thanks for reading this post.
I want to help a very long standing and trusted friend convert the problematic type 3 cooling system to type 1. We don't do hack jobs but would like
some pics or ideas on how others have achieved this . Thanks in advance for any assistance than can be provided..
We are going to be using a 2.1 litre Oxy boxer ,and its already had an IRS conversion that retained the swing axle chassis forks..
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on August 20th, 2011 at 01:45 PM |
|
|
It is possible but you will need a vented decklid and a custom engine tin adapter tin needs to be fabricated to seal the engine into the type 3 engine
bay.
Should work in theory? but what is the point exactly? the type 3 cooling system is just fine and moves the same volume of air as the type 1 upright
slightly more even I think?
If it were a DTM cooling system then yeah probable a good idea to try.
my 2c.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
HoneyAbba
Commited Dubber
Posts: 66
Threads: 1
Registered: August 4th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 20th, 2011 at 06:10 PM |
|
|
IMO the DTM is a joke.
The type 3 cooling fan * Problematic
* Fans don't cope they fall to pieces in the rubber centre, it happens real quick with a 2 litre motor
* Fans are no longer available
* They run at crankshaft speed, thats too fast for this application.
thanks for thinking about it .
any input right or wrong is appreciated.
best regards
ps I love type 3's
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on August 20th, 2011 at 09:15 PM |
|
|
errrr? ok? 
I think that if you build a tank around the engine and fill it with ice water, then you wont need a fan at all? Anyway thats another idea you can
try.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
HoneyAbba
Commited Dubber
Posts: 66
Threads: 1
Registered: August 4th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 21st, 2011 at 06:32 AM |
|
|
don't take offence
|
|
|
ragged
A.k.a.: David
Wolfsburg Wizard
Just ask if you need HELP!
Posts: 478
Threads: 46
Registered: January 25th, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue
Mood: Medication seems to be working
|
| posted on August 21st, 2011 at 12:12 PM |
|
|
Why not put a type 4 engine in it?
|
|
|
SuperOwen
Fahrvergnugen
Posts: 868
Threads: 67
Registered: January 18th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 21st, 2011 at 02:56 PM |
|
|
Just curious why you think the DTM is a joke? I don't have an opinion either way but others seem to love them
|
|
|
HoneyAbba
Commited Dubber
Posts: 66
Threads: 1
Registered: August 4th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 22nd, 2011 at 12:00 AM |
|
|
The oxy boxer is far superior to an old type 4 rattler.
The DTM where do I start ? Well those that promote them are good salesmen but !!!!!!!
As I have herd someone say , I don't need to rate em, they rate themselves.
nuff said I don't want to cause friction.
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on August 22nd, 2011 at 08:33 AM |
|
|
This will be interesting....I totally agree with the problems associated with the type 3 fan/cooling system. It was designed to fit the car, not what
was best for the engine, The fans were collapsing 25 years ago and rebuilding isn't easy (what is?). A larger than stock cam and it's a matter of
when not if.
Type 1 cooling in a Notch, I'm sure you could do it, but routing of fresh air and sealing the wasted air out aint too easy! Also clean fresh air to
carbs.....?$%&#
I certainly don't want to start any arguments, but I have 2 DTMs being installed atm at the owners' requests. One a type 1 and the other a type 4 -
upright conversion. They haven't been run yet, but to date I can only say thier build quality is excellent, design looks to be effective and Raby's
theories/testing sound effective. I'm interested in your comment 'they rate themselves', have you seen issues with them? If so what, I may be able
to prevent them happening to my client's.
Cheers
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
HoneyAbba
Commited Dubber
Posts: 66
Threads: 1
Registered: August 4th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 22nd, 2011 at 10:53 PM |
|
|
I have a customer that had one fitted , when I asked why he chose he said Jake told that they are cooler ??
I am still not convinced.
|
|
|
Matt Ryan
A.k.a.: Matt Ryan
Fahrvergnugen
Posts: 890
Threads: 107
Registered: January 6th, 2006
Member Is Offline
Location: Port Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Fweemin
|
| posted on August 23rd, 2011 at 12:52 PM |
|
|
Looks like it's your turn Jake,
You haven't posted anything since March so don't hold back!
Regards,
Matt.
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on August 23rd, 2011 at 03:31 PM |
|
|
The DTM kits don't run cooler, the big thing with them is they reduce the temp difference between the cylinders more than the stock setup does.
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on August 23rd, 2011 at 09:04 PM |
|
|
| Quote: | Originally
posted by Joel
The DTM kits don't run cooler, the big thing with them is they reduce the temp difference between the cylinders more than the stock setup does.
|
I agree.
His testing was to equalise AND reduce cylinder temps by measuring all cylinders during testing. In his fan housings there are obvious air deflectors
that must force air flow towards otherwise hotter cylinders. His products look good to me.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on August 23rd, 2011 at 09:56 PM |
|
|
yeah its a proven system, it had been developed for a long time before Jake got his hand on it and when he did he made it even better.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
