| [ Total Views: 1916 | Total Replies: 5 | Thread Id: 95821 ] |
|
|
 Olive1975
Learner Dubber
Posts: 19
Threads: 2
Registered: May 5th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 13th, 2012 at 07:53 PM |
|
|
Empi 8 Spokes 4 x 130 and 75 L Bug
Hi all
Just checking if anyone has fitted Empi 8 spoke wheels (15 inch x 5.5 inch, 4 x 130) to an L Bug (75, Rack and Pinion), and if so, did they clear the
mudguards?
My tyre guy, who has bought a L bug for his daughter, is telling me they will be too wide and stick out.
Is this the case? If so, what other rims should I consider?
Thanking the forum in advance.
Cheers
JP
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on March 13th, 2012 at 08:36 PM |
|
|
They do stick out abit.
Is the car lowered?
At stock height if you don't have overly wide tyres it's not a huge issue but it does depend on which company the 8 spokes are from as there has
been so many copys made with different offsets.
74-75 Lbugs are a royal PITA to find rims for.
everything that bolts on sticks out, the only rims that dont like V-force spiders needs narrow coil springs
Barry will chime in, he's had a few differernt rims on his 75L
|
|
|
Olive1975
Learner Dubber
Posts: 19
Threads: 2
Registered: May 5th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 13th, 2012 at 08:40 PM |
|
|
Thanks Joel
Am planning to lower the front by 2 to 4 inches, so am considering suspension changes down the track.
Am a bit confused as it was suggested that they would be okay. Another option is Sprintstars which are 5 inches wide rather than 5.5.
Thanks for your response.
|
|
|
Old Hutcho
Officially Full-On Dubber
Posts: 281
Threads: 54
Registered: January 1st, 2004
Member Is Offline
Location: Bomaderry NSW. 2541
Theme: UltimaBB Pro Blue ( Default )
Mood: NSW Blues supporter to the end!
|
| posted on March 14th, 2012 at 05:01 PM |
|
|
Be really careful mate. I bought a set of BRM's (copies of course) and they wouldnt fit with anything bigger than a 165 tyre!! Thi is on a 70's
model bug with 2.5 inch lowered spindles.
I ended up with the 8 spokes and they just fit with 195 x 65 x 15 on rear and 175 x 65 x 15 front.
The critical measurement is the ET or back spacing. Have a look here http://www.empius.com/ for wheel dimensions, then have a look here http://www.rimsntires.com/specs.jsp to do a comparison with wheels you know will fit.
regards
Old Hutcho
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 14th, 2012 at 05:34 PM |
|
|
g'day
Its all to do with the offset
A V Force Spider is 6" ET36 - same as a Cookie Cutter
A stock wheel (should) be 4.5" ET 41
The Porsche Boxster 16" wheel is 6" ET 50
These all fit - but the 6" wheels need a thin spring strut
You use a programme like this to see what happens
http://www.1010tires.com/WheelOffsetCalculator.asp
I "believe" a sprintstar "should" fit, 2mm less, as they have are ET25 where as an 8 spoke sticks out 10mm
This is compared to the 6" 36ET wheel
Spiders
Porshe Boxster
Another problem is the rear. You reall want different wheels
The Spiders I had were 36ET on the front and 20ET on the rear
My Boxsters ar 6" 50ET front and 7" 40ET rear
Whatever - I would go the Sprintstarts by the above checks
NOTE
This all depends on what your guards are like
Futue te ipsum!!!
|
|
|
Olive1975
Learner Dubber
Posts: 19
Threads: 2
Registered: May 5th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 14th, 2012 at 06:48 PM |
|
|
Thanks Old Hutcho and Bizarre!!
Plenty to think about!!!
Cheers
John
|
|
|
