| [ Total Views: 1453 | Total Replies: 13 | Thread Id: 96393 ] |
|
|
 Dubsky
Commited Dubber
Posts: 67
Threads: 21
Registered: September 21st, 2011
Member Is Offline
Theme: UltimaBB Pro Blue
|
| posted on April 13th, 2012 at 08:49 PM |
|
|
BRM Wheel size
I'm looking at getting some brms for an early lowered fasty and was wondering if anyone has had experience fitting them? They are 5 on 205 lug
pattern 15 inch x 5 inch wide wheels with 3.688 inch back spacing.The car is lowered 2 outer splines... Will I be able to fit them and find a tyre
which allows reasonable turning? Or is a shortened beam the only option?
|
|
|
Burrelli
Officially Full-On Dubber
Posts: 244
Threads: 4
Registered: October 12th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 13th, 2012 at 11:54 PM |
|
|
You will have problems front and rear with just about any after market wide 5 wheel on a lowered early type3. except 63 model maybe.
Your standard wheel offset is +46
Original BRMs are +12 Flat4 +15
With these and the standard set up in the rear they will hit the guards with a 165 tyre and in the front not much turning before they hit the guards
even with a 135 tyre on a lowered car.
The wheels you said you are looking at seem to have more offset. Maybe +20 Maybe a little more.
I think you need an offset of +35 - +40 to bolt wheels on a moderately lowered standard car and have no rubbing issues.
2 splines is a lot 110mm to 120mm lower than standard.
most type3s you see that low with after market wide5 wheels will have short axles in the rear and a narrowed type1 front end.
See this thread
http://forums.aussieveedubbers.com/viewtopic.php?tid=84488&page=1
|
|
|
empi
A.k.a.: Empstar
Compulsive Aussie Vee Dubber
Posts: 4131
Threads: 178
Registered: August 27th, 2002
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: thunderous
|
| posted on April 14th, 2012 at 10:44 AM |
|
|
What year is the type 3?
Short axle swap to fit em... there is a blue notch with a set of 4in wide brm wheels in my rides (in members rides)had to do the swap to fit em.
What year is car?
"If at first you don't succeed, skydiving is not for you." - Anonymous  |
|
|
Dubsky
Commited Dubber
Posts: 67
Threads: 21
Registered: September 21st, 2011
Member Is Offline
Theme: UltimaBB Pro Blue
|
| posted on April 14th, 2012 at 02:29 PM |
|
|
Thanks for the link to the thread it explains it all. The fasty is a 68 but I was also considering putting a similar wheel on my 65 notch. I'm
guessing a short axle swap for both Adam? Are there any cool rims that would bolt straight on?
|
|
|
Racermelb
Commited Dubber
Posts: 63
Threads: 9
Registered: August 25th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 24th, 2012 at 11:32 AM |
|
|
This is my son's 64 Square with BRM's fitted, 5.0 rear and 4.5 fronts with 145 all round, no modifications wheels clear perfectly, so there are rims
out the that will fit with out mods
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
empi
A.k.a.: Empstar
Compulsive Aussie Vee Dubber
Posts: 4131
Threads: 178
Registered: August 27th, 2002
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: thunderous
|
| posted on April 25th, 2012 at 11:31 AM |
|
|
64 has a thinner drum to 65 on cars, my 63 had 5 spokes on the back and fitted fine without the axle swap.
>64 drums have a swirl on the centre of the drum 65> drums have a 5 spoke pattern that look similar to a Fuch and are a wider drum.
"If at first you don't succeed, skydiving is not for you." - Anonymous |
|
|
empi
A.k.a.: Empstar
Compulsive Aussie Vee Dubber
Posts: 4131
Threads: 178
Registered: August 27th, 2002
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: thunderous
|
| posted on April 25th, 2012 at 11:42 AM |
|
|
Vicelore's 67 notch with shorter axles and 4.5 x 15 Brms all round 165 x 15 on the rear and 135 on the front (the way it should be!)
Racer, 145 on the rear!! is that so the wheels fit?
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
"If at first you don't succeed, skydiving is not for you." - Anonymous |
|
|
empi
A.k.a.: Empstar
Compulsive Aussie Vee Dubber
Posts: 4131
Threads: 178
Registered: August 27th, 2002
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: thunderous
|
| posted on April 25th, 2012 at 11:55 AM |
|
|
Here are the early and late drums, the late ones 65> are on the far left and the earlier >64 are on the right with the swirl or twist in the
middle, the earlier drums are a thinner width than the later drums allowing 5.5 in wheels to fit.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
"If at first you don't succeed, skydiving is not for you." - Anonymous |
|
|
empi
A.k.a.: Empstar
Compulsive Aussie Vee Dubber
Posts: 4131
Threads: 178
Registered: August 27th, 2002
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: thunderous
|
| posted on April 25th, 2012 at 12:18 PM |
|
|
| Quote: | Originally
posted by Dubsky
Thanks for the link to the thread it explains it all. The fasty is a 68 but I was also considering putting a similar wheel on my 65 notch. I'm
guessing a short axle swap for both Adam? Are there any cool rims that would bolt straight on?
|
Is the 68 a 4 or 5 stud? is it IRS or swing axle?
Take a look at myrides towards the end there are several type 3s that have come over for wheel fitting and lowering.
http://forums.aussieveedubbers.com/viewtopic.php?tid=8948&page=1
or join our group type3 contingent on Facebook.
http://www.facebook.com/home.php#!/pages/TYPE-3-Contingent/196637397088563
"If at first you don't succeed, skydiving is not for you." - Anonymous |
|
|
Dubsky
Commited Dubber
Posts: 67
Threads: 21
Registered: September 21st, 2011
Member Is Offline
Theme: UltimaBB Pro Blue
|
| posted on April 25th, 2012 at 06:15 PM |
|
|
The 68 is 5 stud with the thick drum and swing axle.
Is it possible to get the early drums and just swap them?
|
|
|
empi
A.k.a.: Empstar
Compulsive Aussie Vee Dubber
Posts: 4131
Threads: 178
Registered: August 27th, 2002
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: thunderous
|
| posted on April 25th, 2012 at 07:22 PM |
|
|
possibly, if u could find some, would need all other components in the drum. convert your car to 5 x 130 porsche pattern and use late beetle rear
drums etc.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
"If at first you don't succeed, skydiving is not for you." - Anonymous |
|
|
vicelore
Officially Full-On Dubber
Posts: 254
Threads: 33
Registered: February 11th, 2010
Member Is Offline
Location: Somerville Vic
Theme: UltimaBB Pro Grey
|
| posted on June 8th, 2012 at 08:45 AM |
|
|
This post makes me kringe..  was a fun time tho ay empi..
Currently driving my 1st VW.. 67 type 3 1600..And loving it..
|
|
|
empi
A.k.a.: Empstar
Compulsive Aussie Vee Dubber
Posts: 4131
Threads: 178
Registered: August 27th, 2002
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: thunderous
|
| posted on June 8th, 2012 at 11:44 AM |
|
|
Yay gearbox oil!!! Smells like crap!! Had a fun time doing it aint going outa my way to do it again!!
"If at first you don't succeed, skydiving is not for you." - Anonymous |
|
|
vicelore
Officially Full-On Dubber
Posts: 254
Threads: 33
Registered: February 11th, 2010
Member Is Offline
Location: Somerville Vic
Theme: UltimaBB Pro Grey
|
| posted on June 8th, 2012 at 01:45 PM |
|
|
Esp for this guy..
Currently driving my 1st VW.. 67 type 3 1600..And loving it..
|
|
|
