| [ Total Views: 1088 | Total Replies: 7 | Thread Id: 98610 ] |
|
|
 satori
Wolfsburg Wizard
Posts: 497
Threads: 243
Registered: May 9th, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Grey
|
| posted on August 30th, 2012 at 08:19 PM |
|
|
engineer Cert - Brake test-
I am in the process of putting a ej25 into my DC T3. Regency said that I will probably need to get a engineer to do a brake test. Has anyone had this
done. Do you think the T3 brakes are up to the task. Im down in Adelaide. Thanks
[URL=http://s1226
|
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on August 30th, 2012 at 10:49 PM |
|
|
If it is a non turbo EJ25, then you will be fine. The stock brakes on our 1975 T2 passed the brake test for an EJ22 real easy. The engineer said they
were well within requirements.
|
|
|
Dub_Life
Slammed & Awesome Dubber
Posts: 77
Threads: 14
Registered: June 24th, 2009
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 30th, 2012 at 11:32 PM |
|
|
Have you spoken to any engineers yet? Let me know if you need a good engineer, he's done some subaru conversions before and seams to have a good
reputation. He can also give you good advice on everything you need to do.
|
|
|
aintgotitmusthaveit
A.k.a.: Nick
Officially Full-On Dubber
Posts: 295
Threads: 75
Registered: June 14th, 2006
Member Is Offline
Location: Melbourne
Theme: XMBX Pro Green
|
| posted on August 31st, 2012 at 11:28 PM |
|
|
Guys
From what I've read this is a brake test from A fixed speed
It has nothing to do with the the gibes output but more the weight of the car and how it's influenced by a heavier engine install
Going thru it now with the eng on the buggy
Same test using a stock 1300 and a supercharged 1600
|
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on September 1st, 2012 at 12:02 AM |
|
|
The brake test is done by accelerating to fixed speeds and braking as quick as possible several times. The output of the engine will have your brakes
tested quicker, and the chance for brake fade is higher due to the less time for heat dissipation.
A friend of mine had an old Holden with V8 conversion tested, and his brakes, suspension and front ball joints got so hot the grease was melting out
of the rubber boots. His car just passed.
|
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on September 1st, 2012 at 09:45 AM |
|
|
This is what a guy from work told me about his car
The brake test consisted of 8 stops from 60kmh and 2 stops from 100kmh. They use an accelerometer to measure deceleration and a pressure sensor on the
pedal. The values have to be fairly close across all 10 braking stops for it to pass
|
|
|
hulbyw
Insano Dub Head
Posts: 804
Threads: 131
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on September 1st, 2012 at 07:21 PM |
|
|
You definitely need to talk to an engineer in SA as we don't have national laws for mods yet. Can recommend an engineer in Vic but that will not be
any help to you.
Cheers..........Wayne
|
|
|
silver
Veteran Volks Folk
Dangerous when poked
Posts: 2169
Threads: 162
Registered: December 8th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: In 2 Minds
|
| posted on September 1st, 2012 at 07:52 PM |
|
|
in sydney they just shake the box
Keeping it real !
|
|
|
